[Thu May 2 02:54:13 2013] Detection parameters: Position = (306.8, 307.0) = 10 19 35.46 19 51 17.6 Extent = 43.5" x 43.5", rotation angle = 0 degrees Source counts = 481.2 +/- 47.3 Background counts = 4247.9 Rate = 0.02 +/- 0.002 [Thu May 2 02:54:13 2013] Off-axis axis estimate = 0.87' [Thu May 2 02:54:29 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting [Thu May 2 02:54:29 2013] Initial guess for spatial extent in simple fitting = 6.86" [Thu May 2 02:54:29 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927 [Thu May 2 02:54:29 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 6.86" [Thu May 2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1.ximg exists [Thu May 2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1.csv [Thu May 2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1_1.ximg exists [Thu May 2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1.csv [Thu May 2 03:06:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Thu May 2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1.csv [Thu May 2 03:06:37 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Thu May 2 03:06:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1.csv [Thu May 2 03:06:37 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 04:05:37 2013] Spatial fit model total counts = 13.830000, observed total counts = 28.000000 [Thu May 2 04:05:37 2013] Poor agreement between spatial fit and data for source 1 It may help to tweak spatial fit manually Not incorporating fit results [Thu May 2 04:05:37 2013] Vigneting correction estimate = 1.000000 [Thu May 2 04:05:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 04:05:37 2013] Assessing source extent using major [Thu May 2 04:05:37 2013] Source does appear to be extended [Thu May 2 04:05:37 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 04:05:37 2013] Source is confused with source 2 [Thu May 2 04:05:37 2013] Source is confused with source 4 [Thu May 2 04:05:49 2013] Using EEF radius (= 6.86 ")to estimate initial spatial extent for simple fitting [Thu May 2 04:05:49 2013] Initial guess for spatial extent in simple fitting = 6.86" [Thu May 2 04:05:49 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.927 [Thu May 2 04:05:49 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.86" [Thu May 2 04:09:56 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1.ximg exists [Thu May 2 04:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1.csv [Thu May 2 04:09:56 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1_1.ximg exists [Thu May 2 04:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1.csv [Thu May 2 04:09:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 04:09:56 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Thu May 2 04:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 2 04:09:56 2013] fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Thu May 2 04:09:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1.csv [Thu May 2 04:09:56 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 2 05:21:41 2013] Source 1 is offset by -6.478169 and -7.004192 pixels which is larger than 2 X fitted extent = 0.790860 x 0.790860, not incorporating fit results [Thu May 2 05:21:41 2013] Vigneting correction estimate = 1.000000 [Thu May 2 05:21:41 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 2 05:21:41 2013] Assessing source extent using major [Thu May 2 05:21:41 2013] Source does appear to be extended [Thu May 2 05:21:41 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 2 05:21:49 2013] XMMSAS src. selection expression = ellipse(26645.897339, 26658.981323, 2610.000000, 2610.000000, 0.000000, X, Y) [Thu May 2 05:21:49 2013] Writing source region out to fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_src.reg [Thu May 2 05:21:49 2013] Extracting stamp from image fullrun_pn_xmm0111440101_pi300-10000_cl_sm2.00.img.gz, (157, 157) - (457, 457) [Thu May 2 05:21:49 2013] XMMSAS bgd. selection expression = annulus(26645.897339, 26658.981323, 4350.000000, 8700.000000, X, Y) && !ellipse(26412.829760, 27829.209600, 503.214414, 503.214414, 0.000000, X, Y) && !ellipse(27883.026825, 24492.570343, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 2 05:21:49 2013] Writing fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1.gif [Thu May 2 05:21:50 2013] Mean detx,y = (195.69, 65.88) [Thu May 2 05:21:51 2013] Setting backscal keywords in source and bgd. spectrum [Thu May 2 05:22:54 2013] Binned source spectrum to 10 counts/bin [Thu May 2 05:22:55 2013] Setting source spectrum file to fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Thu May 2 05:22:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Thu May 2 05:23:11 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu May 2 05:23:11 2013] rmf not generated due to insufficient counts [Thu May 2 10:11:39 2013] Updating aperture counts using extracted products [Thu May 2 10:11:40 2013] Total counts from fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 548.00 [Thu May 2 10:11:40 2013] Total counts from fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_bgd.pi.gz = 1.00 [Thu May 2 10:11:40 2013] Got source and background scale factors 18766820.000000, 135524.000000 [Thu May 2 10:11:40 2013] User source parameters: Position = (306.8, 307.0) = 10 19 35.46 19 51 17.6 Extent = 43.5" x 43.5", rotation angle = 0 Source aperture counts = 409.5 +/- 24.4 Background aperture counts = 138.5 Rate = 6 +/- 0.4 [Thu May 2 10:11:40 2013] Updating counts from extracted products [Thu May 2 10:11:40 2013] Set source signif. to 409.52/11.77 = 34.80 [Thu May 2 10:11:40 2013] No arf file for this source, not re-computing flux [Thu May 2 10:11:44 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu May 2 10:11:45 2013] xmm0111440101/analysis//spectral/fullrun_pn_xmm0111440101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete