[Thu May  2 02:54:14 2013] Detection parameters:
  Position = (378.7, 229.4) = 10 19 13.33 19 45 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.2 +/- 14.2
  Background counts = 46.0
  Rate = 0.006 +/- 0.0008

[Thu May  2 02:54:14 2013] Off-axis axis estimate = 7.68'
[Thu May  2 03:06:37 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu May  2 03:06:37 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Thu May  2 03:06:37 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.886
[Thu May  2 03:06:37 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.27"
[Thu May  2 03:17:25 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3.ximg exists
[Thu May  2 03:17:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3.csv
[Thu May  2 03:17:25 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May  2 03:17:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3.csv
[Thu May  2 03:17:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 03:17:25 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May  2 03:17:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  2 03:17:25 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May  2 03:17:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu May  2 03:17:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111440101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 04:05:39 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.394565 pixels away
[Thu May  2 04:05:39 2013] Vigneting correction estimate = 1.000000
[Thu May  2 04:05:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 04:05:39 2013] Assessing source extent using major
[Thu May  2 04:05:39 2013] Source does appear to be extended
[Thu May  2 04:05:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 04:09:56 2013] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Thu May  2 04:09:56 2013] Initial guess for spatial extent in simple fitting = 10.27"
[Thu May  2 04:09:56 2013] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.886
[Thu May  2 04:09:56 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 10.27"
[Thu May  2 04:19:21 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_src3.ximg exists
[Thu May  2 04:19:21 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May  2 04:19:21 2013] Fit fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May  2 04:19:22 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May  2 04:19:22 2013] fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May  2 04:19:22 2013] Fit fullrun_mos1_xmm0111440101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu May  2 05:21:42 2013] Spatial fit model total counts = 386.185000, observed total counts = 385.000000
[Thu May  2 05:21:42 2013] Offset between fit and detection position for source 5 = 0.485203 pixels
[Thu May  2 05:21:42 2013] 390.970300 total counts/ 349.911000 bgd. counts: snr = 2.194991
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.485203 pixels
  Position = (378.2, 229.6) = 10 19 13.46 19 45 37.5
  Extent = 4.1 (2.6-6.0)", rotation angle = 0
  Source counts = 41.1 +/- 19.8
  Background counts = 349.9
  Rate = 0.001 +/- 0.0006
[Thu May  2 05:21:42 2013] Vigneting correction estimate = 1.000000
[Thu May  2 05:21:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 05:21:42 2013] Assessing source extent using major axis lower bound
[Thu May  2 05:21:42 2013] Source does appear to be extended
[Thu May  2 05:21:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 09:54:55 2013] XMMSAS src. selection expression = ellipse(32857.998600, 19925.600400, 247.705807, 247.705807, 0.000000, X, Y)
[Thu May  2 09:54:55 2013] Writing source region out to fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_src.reg
[Thu May  2 09:54:55 2013] Extracting stamp from image fullrun_mos1_xmm0111440101_pi300-10000_cl_sm2.00.img.gz, (364, 215) - (392, 244)
[Thu May  2 09:54:55 2013] XMMSAS bgd. selection expression = annulus(32857.998600, 19925.600400, 412.843012, 825.686024, X, Y)
[Thu May  2 09:54:55 2013] Writing fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5.gif
[Thu May  2 09:55:37 2013] Mean detx,y = (-9686.16, 2540.94) 
[Thu May  2 09:55:37 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May  2 09:55:42 2013] Binned source spectrum to 10 counts/bin
[Thu May  2 09:55:42 2013] Setting source spectrum file to fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May  2 09:55:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May  2 10:00:20 2013] Not generating rmf since there are only 41 counts
[Thu May  2 10:00:20 2013] rmf not generated due to insufficient counts
[Thu May  2 10:11:40 2013] Updating aperture counts using extracted products
[Thu May  2 10:11:40 2013] Total counts from fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 77.00
[Thu May  2 10:11:40 2013] Total counts from fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 293.00
[Thu May  2 10:11:40 2013] Got source and background scale factors 171040.000000, 1508148.000000
[Thu May  2 10:11:40 2013] User source parameters:
  Position = (378.2, 229.6) = 10 19 13.46 19 45 37.5
  Extent = 4.1 (2.6-6.0)", rotation angle = 0
  Source aperture counts = 43.8 +/- 9.8
  Background aperture counts = 33.2
  Rate = 0.001 +/- 0.0003

[Thu May  2 10:11:41 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 10:11:41 2013] Using photon index=1.80, rate=0.00128, arf fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5.arf
[Thu May  2 10:11:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May  2 10:11:41 2013] Updating source flux to 3.3e-14
[Thu May  2 10:11:42 2013] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May  2 10:11:43 2013] xmm0111440101/analysis//spectral/fullrun_mos1_xmm0111440101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete