[Wed Mar  7 10:22:39 2012] Detection parameters:
  Position = (276.2, 287.8) = 1 39 1.82 -17 57 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65450.5 +/- 301.5
  Background counts = 212.6
  Rate = 2 +/- 0.01

[Wed Mar  7 10:22:39 2012] Off-axis axis estimate = 1.79'
[Wed Mar  7 10:38:10 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 10:38:10 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Mar  7 10:38:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.839
[Wed Mar  7 10:38:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Mar  7 11:06:52 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 11:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:06:52 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 11:06:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 11:06:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:06:52 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 11:06:52 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 11:06:52 2012] Fit fullrun_pn_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 12:19:44 2012] Spatial fit model total counts = 59121.400000, observed total counts = 59111.000000
[Wed Mar  7 12:19:44 2012] Offset between fit and detection position for source 1 = 0.164326 pixels
[Wed Mar  7 12:19:44 2012] 59071.300000 total counts/ 13031.900000 bgd. counts: snr = 403.297738
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.164326 pixels
  Position = (276.2, 287.6) = 1 39 1.81 -17 57 1.5
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 46039.4 +/- 243.0
  Background counts = 13031.9
  Rate = 1 +/- 0.006
[Wed Mar  7 12:19:44 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 12:19:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 12:19:44 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 12:19:44 2012] Source does appear to be extended
[Wed Mar  7 12:19:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 12:20:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 12:20:02 2012] Initial guess for spatial extent in simple fitting = 5.73"
[Wed Mar  7 12:20:02 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.908
[Wed Mar  7 12:20:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.73"
[Wed Mar  7 12:29:39 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 12:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 12:29:39 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 12:29:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 12:29:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 12:29:39 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 12:29:39 2012] fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 12:29:39 2012] Fit fullrun_pn_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 13:23:15 2012] Spatial fit model total counts = 59166.800000, observed total counts = 59126.000000
[Wed Mar  7 13:23:15 2012] Offset between fit and detection position for source 1 = 0.012106 pixels
[Wed Mar  7 13:23:15 2012] 59307.700000 total counts/ 13107.900000 bgd. counts: snr = 403.527871
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012106 pixels
  Position = (276.2, 287.6) = 1 39 1.81 -17 57 1.5
  Extent = 5.8 (5.7-5.8)", rotation angle = 0
  Source counts = 46199.8 +/- 243.5
  Background counts = 13107.9
  Rate = 1 +/- 0.006
[Wed Mar  7 13:23:15 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:23:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:23:15 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:23:15 2012] Source does appear to be extended
[Wed Mar  7 13:23:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 13:23:31 2012] Counts = 46199.800000, rescaling region sizes by 3.000000
[Wed Mar  7 13:23:31 2012] XMMSAS src. selection expression = ellipse(23979.810320, 24972.714600, 1037.368830, 1037.368830, 0.000000, X, Y)
[Wed Mar  7 13:23:31 2012] Writing source region out to fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 13:23:31 2012] Extracting stamp from image fullrun_pn_xmm0111430101_pi300-10000_cl_sm2.00.img.gz, (217, 228) - (336, 347)
[Wed Mar  7 13:23:31 2012] XMMSAS bgd. selection expression = annulus(23979.810320, 24972.714600, 5186.844149, 10373.688298, X, Y) && !ellipse(24123.348694, 28306.634094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23701.415826, 26311.852022, 340.650410, 340.650410, 0.000000, X, Y) && !ellipse(24404.638000, 28679.710000, 353.219210, 353.219210, 0.000000, X, Y)
[Wed Mar  7 13:23:31 2012] Writing fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 13:27:46 2012] Mean detx,y = (370.68, -131.99) 
[Wed Mar  7 13:27:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 13:29:56 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 13:29:57 2012] Setting source spectrum file to fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 13:29:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 14:56:31 2012] Updating aperture counts using extracted products
[Wed Mar  7 14:56:31 2012] Error reading totcts from fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 14:56:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 14:56:31 2012] Using photon index=1.80, rate=1.14, arf fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 14:56:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 14:56:31 2012] Updating source flux to 2.7e-12
[Wed Mar  7 14:58:22 2012] Reading fit data from xmm0111430101/analysis//spectral/fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 14:58:22 2012] Spectral fit parameter nH value = 3.56312e+21
[Wed Mar  7 14:58:22 2012] Spectral fit parameter PhoIndex value = 5.29765
[Wed Mar  7 14:58:22 2012] Failed to get F(0.3-8.0) from xmm0111430101/analysis//spectral/fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 14:58:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 14:58:22 2012] Using Nh = 3.6e+21, photon index=5.30, rate=1.14, arf fullrun_pn_xmm0111430101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 14:58:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 14:58:22 2012] Updating source flux to 1.5e-12