[Wed Mar 7 10:22:43 2012] Detection parameters: Position = (105.6, 357.1) = 1 39 53.77 -17 51 56.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 148.0 +/- 16.9 Background counts = 32.2 Rate = 0.004 +/- 0.0004 [Wed Mar 7 10:22:44 2012] Off-axis axis estimate = 14.61' [Wed Mar 7 11:37:56 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting [Wed Mar 7 11:37:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Mar 7 11:37:56 2012] Initial guess for spatial extent in simple fitting = 13.73" [Wed Mar 7 11:37:56 2012] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.991 [Wed Mar 7 11:37:56 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.73" [Wed Mar 7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6.ximg exists [Wed Mar 7 12:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6.csv [Wed Mar 7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6_1.ximg exists [Wed Mar 7 12:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6.csv [Wed Mar 7 12:19:41 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Mar 7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Wed Mar 7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Wed Mar 7 12:19:41 2012] Fit fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Wed Mar 7 12:19:53 2012] Spatial fit model total counts = 422.114000, observed total counts = 389.000000 [Wed Mar 7 12:19:53 2012] Offset between fit and detection position for source 3 = 0.420391 pixels [Wed Mar 7 12:19:53 2012] 428.109300 total counts/ 364.600000 bgd. counts: snr = 3.326052 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.420391 pixels Position = (105.8, 357.5) = 1 39 53.73 -17 51 56.7 Extent = 3.4" x 3.4", rotation angle = 0 Source counts = 63.5 +/- 20.7 Background counts = 364.6 Rate = 0.002 +/- 0.0006 [Wed Mar 7 12:19:53 2012] Vigneting correction estimate = 1.000000 [Wed Mar 7 12:19:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Mar 7 12:19:53 2012] Assessing source extent using major [Wed Mar 7 12:19:53 2012] Source does appear to be extended [Wed Mar 7 12:19:53 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 7 12:19:53 2012] Deleting source due to low Poisson probability 1.0