[Wed Mar  7 10:22:42 2012] Detection parameters:
  Position = (276.3, 287.6) = 1 39 1.79 -17 57 0.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22188.7 +/- 177.5
  Background counts = 57.7
  Rate = 0.6 +/- 0.005

[Wed Mar  7 10:22:44 2012] Off-axis axis estimate = 1.79'
[Wed Mar  7 11:37:56 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:37:56 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Wed Mar  7 11:37:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 18, frac = 0.944
[Wed Mar  7 11:37:56 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Wed Mar  7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Mar  7 12:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Mar  7 12:19:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1.csv
[Wed Mar  7 12:19:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Mar  7 12:19:41 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Mar  7 12:19:41 2012] Fit fullrun_mos2_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Mar  7 12:19:53 2012] Spatial fit model total counts = 17866.900000, observed total counts = 17466.000000
[Wed Mar  7 12:19:53 2012] Offset between fit and detection position for source 1 = 0.008975 pixels
[Wed Mar  7 12:19:53 2012] 17894.400000 total counts/ 3663.200000 bgd. counts: snr = 235.131712
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008975 pixels
  Position = (276.3, 287.6) = 1 39 1.79 -17 57 1.5
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 14231.2 +/- 133.8
  Background counts = 3663.2
  Rate = 0.4 +/- 0.004
[Wed Mar  7 12:19:53 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 12:19:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 12:19:53 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 12:19:53 2012] Source does appear to be extended
[Wed Mar  7 12:19:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 12:58:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar  7 12:58:03 2012] Initial guess for spatial extent in simple fitting = 5.23"
[Wed Mar  7 12:58:03 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.776
[Wed Mar  7 12:58:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.23"
[Wed Mar  7 13:23:12 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Mar  7 13:23:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 13:23:12 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Mar  7 13:23:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1.csv
[Wed Mar  7 13:23:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 13:23:12 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Mar  7 13:23:12 2012] fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Mar  7 13:23:12 2012] Fit fullrun_mos2_xmm0111430101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Mar  7 13:23:23 2012] Spatial fit model total counts = 17867.900000, observed total counts = 17466.000000
[Wed Mar  7 13:23:23 2012] Offset between fit and detection position for source 1 = 0.000121 pixels
[Wed Mar  7 13:23:23 2012] 17895.450000 total counts/ 3660.250000 bgd. counts: snr = 235.292562
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000121 pixels
  Position = (276.3, 287.6) = 1 39 1.79 -17 57 1.5
  Extent = 5.2 (5.1-5.3)", rotation angle = 0
  Source counts = 14235.2 +/- 133.8
  Background counts = 3660.2
  Rate = 0.4 +/- 0.004
[Wed Mar  7 13:23:23 2012] Vigneting correction estimate = 1.000000
[Wed Mar  7 13:23:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar  7 13:23:23 2012] Assessing source extent using major axis lower bound
[Wed Mar  7 13:23:23 2012] Source does appear to be extended
[Wed Mar  7 13:23:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar  7 14:36:01 2012] Counts = 14235.200000, rescaling region sizes by 3.000000
[Wed Mar  7 14:36:01 2012] XMMSAS src. selection expression = ellipse(23986.896800, 24973.988600, 942.073227, 942.073227, 0.000000, X, Y)
[Wed Mar  7 14:36:01 2012] Writing source region out to fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar  7 14:36:01 2012] Extracting stamp from image fullrun_mos2_xmm0111430101_pi300-10000_cl_sm2.00.img.gz, (222, 233) - (330, 342)
[Wed Mar  7 14:36:01 2012] XMMSAS bgd. selection expression = annulus(23986.896800, 24973.988600, 4710.366136, 9420.732271, X, Y) && !ellipse(30312.040360, 33587.312800, 527.412815, 527.412815, 0.000000, X, Y) && !ellipse(14520.200000, 20970.328200, 617.587218, 617.587218, 0.000000, X, Y) && !ellipse(29476.442657, 32513.185516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16631.186569, 30587.622864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32239.528992, 25187.606567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19272.494675, 19446.497330, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar  7 14:36:01 2012] Writing fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1.gif
[Wed Mar  7 14:36:13 2012] Mean detx,y = (-197.48, -9.23) 
[Wed Mar  7 14:36:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar  7 14:39:27 2012] Binned source spectrum to 10 counts/bin
[Wed Mar  7 14:39:27 2012] Setting source spectrum file to fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 14:39:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Mar  7 14:56:33 2012] Updating aperture counts using extracted products
[Wed Mar  7 14:56:33 2012] Error reading totcts from fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar  7 14:56:34 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 14:56:34 2012] Using photon index=1.80, rate=0.383, arf fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 14:56:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 14:56:34 2012] Updating source flux to 4.1e-12
[Wed Mar  7 14:57:32 2012] Reading fit data from xmm0111430101/analysis//spectral/fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Mar  7 14:57:32 2012] Spectral fit parameter nH value = 4.55593e+21
[Wed Mar  7 14:57:32 2012] Spectral fit parameter PhoIndex value = 5.87944
[Wed Mar  7 14:57:32 2012] Failed to get F(0.3-8.0) from xmm0111430101/analysis//spectral/fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Mar  7 14:57:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar  7 14:57:32 2012] Using Nh = 4.6e+21, photon index=5.88, rate=0.383, arf fullrun_mos2_xmm0111430101_pi300-10000_pass1_cl_src1.arf
[Wed Mar  7 14:57:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar  7 14:57:32 2012] Updating source flux to 2.5e-12