[Wed Mar  7 10:22:40 2012] Detection parameters:
  Position = (176.2, 245.6) = 1 39 32.30 -18 0 4.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 12.8
  Background counts = 40.4
  Rate = 0.004 +/- 0.0006

[Wed Mar  7 10:22:41 2012] Off-axis axis estimate = 9.65'
[Wed Mar  7 11:06:52 2012] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Wed Mar  7 11:06:52 2012] Initial guess for spatial extent in simple fitting = 11.26"
[Wed Mar  7 11:06:52 2012] source mask rpix=2.6, npix_max = 38, mask sum = 32, frac = 0.839
[Wed Mar  7 11:06:52 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 11.26"
[Wed Mar  7 11:37:56 2012] fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5.ximg exists
[Wed Mar  7 11:37:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5.csv
[Wed Mar  7 11:37:56 2012] fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Mar  7 11:37:56 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5.csv
[Wed Mar  7 11:37:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 11:37:56 2012] fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Mar  7 11:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Mar  7 11:37:56 2012] fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Mar  7 11:37:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Wed Mar  7 11:37:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111430101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar  7 12:19:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.512531 pixels away
[Wed Mar  7 12:19:49 2012] Spatial fit model total counts = 350.172000, observed total counts = 347.000000
[Wed Mar  7 12:19:49 2012] Offset between fit and detection position for source 8 = 6.144399 pixels
[Wed Mar  7 12:19:49 2012] Warning, changing simple spatial fit ID from 5 to 7
[Wed Mar  7 12:19:49 2012] 360.101014 total counts/ 360.101000 bgd. counts: snr = 0.000001
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 6.144399 pixels
  Position = (176.7, 251.7) = 1 39 32.15 -17 59 37.5
  Extent = 23.3 (2.9-43.6)", rotation angle = 0
  Source counts = 0.0 +/- 19.0
  Background counts = 360.1
  Rate = 4e-10 +/- 0.0005
  Deleting source due to low Poisson probability