[Sat Mar  3 21:52:50 2012] Detection parameters:
  Position = (395.1, 130.4) = 20 44 42.91 -31 33 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.6 +/- 13.9
  Background counts = 25.7
  Rate = 0.002 +/- 0.0003

[Sat Mar  3 21:52:50 2012] Off-axis axis estimate = 14.05'
[Sat Mar  3 22:36:20 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 22:36:20 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Sat Mar  3 22:36:20 2012] source mask rpix=3.1, npix_max = 51, mask sum = 33, frac = 0.639
[Sat Mar  3 22:36:20 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.46"
[Sat Mar  3 22:59:03 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Mar  3 22:59:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19.csv
[Sat Mar  3 22:59:03 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Mar  3 22:59:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19.csv
[Sat Mar  3 22:59:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 22:59:03 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Mar  3 22:59:03 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Mar  3 22:59:03 2012] Fit fullrun_mos2_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Mar  3 22:59:10 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.125302 pixels away
[Sat Mar  3 22:59:10 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 22:59:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 22:59:10 2012] Assessing source extent using major
[Sat Mar  3 22:59:10 2012] Source does appear to be extended
[Sat Mar  3 22:59:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 22:59:10 2012] Source is confused with source 4
[Sat Mar  3 23:13:41 2012] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 23:13:41 2012] Initial guess for spatial extent in simple fitting = 13.46"
[Sat Mar  3 23:13:41 2012] source mask rpix=3.1, npix_max = 51, mask sum = 33, frac = 0.639
[Sat Mar  3 23:13:41 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 13.46"
[Sat Mar  3 23:38:49 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Mar  3 23:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19.csv
[Sat Mar  3 23:38:49 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Mar  3 23:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19.csv
[Sat Mar  3 23:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 23:38:49 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Mar  3 23:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Mar  3 23:38:49 2012] fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Mar  3 23:38:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Mar  3 23:38:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 23:38:54 2012] Spatial fit model total counts = 607.002000, observed total counts = 297.000000
[Sat Mar  3 23:38:54 2012] Poor agreement between spatial fit and data for source 25
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar  3 23:38:54 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 17.223247 pixels away
[Sat Mar  3 23:38:54 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 23:38:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 23:38:54 2012] Assessing source extent using major
[Sat Mar  3 23:38:54 2012] Source does appear to be extended
[Sat Mar  3 23:38:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:58:11 2012] XMMSAS src. selection expression = ellipse(34327.839630, 11298.103561, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar  4 00:58:11 2012] Writing source region out to fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25_src.reg
[Sun Mar  4 00:58:11 2012] Extracting stamp from image fullrun_mos2_xmm0111420101_pi300-10000_cl_sm2.00.img.gz, (358, 93) - (433, 168)
[Sun Mar  4 00:58:11 2012] XMMSAS bgd. selection expression = annulus(34327.839630, 11298.103561, 1087.500000, 2175.000000, X, Y) && !ellipse(34870.004578, 11581.149597, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Mar  4 00:58:11 2012] Writing fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25.gif
[Sun Mar  4 01:01:33 2012] Mean detx,y = (-11325.06, -12820.63) 
[Sun Mar  4 01:01:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 01:01:43 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 01:01:44 2012] Setting source spectrum file to fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar  4 01:01:44 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun Mar  4 01:17:12 2012] Not generating rmf since there are only 92 counts
[Sun Mar  4 01:17:12 2012] rmf not generated due to insufficient counts
[Sun Mar  4 01:18:13 2012] Updating aperture counts using extracted products
[Sun Mar  4 01:18:13 2012] Error reading totcts from fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun Mar  4 01:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 01:18:13 2012] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0111420101_pi300-10000_pass1_cl_src25.arf
[Sun Mar  4 01:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 01:18:13 2012] Updating source flux to 5.9e-14
[Sun Mar  4 01:18:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting