[Sat Mar  3 21:52:35 2012] Detection parameters:
  Position = (430.7, 354.2) = 20 44 30.95 -31 17 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 327.2 +/- 22.8
  Background counts = 15.4
  Rate = 0.01 +/- 0.0007

[Sat Mar  3 21:52:36 2012] Off-axis axis estimate = 10.41'
[Sat Mar  3 22:07:21 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 22:07:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 22:07:21 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sat Mar  3 22:07:21 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.042
[Sat Mar  3 22:07:21 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.63"
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3.csv
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3.csv
[Sat Mar  3 22:36:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Mar  3 22:36:20 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sat Mar  3 22:59:07 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.088158 pixels away
[Sat Mar  3 22:59:07 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 22:59:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 22:59:07 2012] Assessing source extent using major
[Sat Mar  3 22:59:07 2012] Source does appear to be extended
[Sat Mar  3 22:59:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 23:03:46 2012] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 23:03:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 23:03:46 2012] Initial guess for spatial extent in simple fitting = 11.63"
[Sat Mar  3 23:03:46 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.042
[Sat Mar  3 23:03:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.63"
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3.csv
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3.csv
[Sat Mar  3 23:13:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Mar  3 23:13:41 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Mar  3 23:38:51 2012] Spatial fit model total counts = 416.773000, observed total counts = 415.000000
[Sat Mar  3 23:38:51 2012] Offset between fit and detection position for source 2 = 0.263636 pixels
[Sat Mar  3 23:38:51 2012] 414.971000 total counts/ 197.452000 bgd. counts: snr = 15.479839
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.263636 pixels
  Position = (430.5, 354.4) = 20 44 31.02 -31 17 22.6
  Extent = 5.1 (4.7-5.8)", rotation angle = 0
  Source counts = 217.5 +/- 20.4
  Background counts = 197.5
  Rate = 0.004 +/- 0.0004
[Sat Mar  3 23:38:51 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 23:38:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 23:38:51 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 23:38:51 2012] Source does appear to be extended
[Sat Mar  3 23:38:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:30:51 2012] XMMSAS src. selection expression = ellipse(37401.187600, 30783.894600, 307.309209, 307.309209, 0.000000, X, Y)
[Sun Mar  4 00:30:51 2012] Writing source region out to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar  4 00:30:51 2012] Extracting stamp from image fullrun_mos1_xmm0111420101_pi300-10000_cl_sm2.00.img.gz, (413, 337) - (448, 372)
[Sun Mar  4 00:30:51 2012] XMMSAS bgd. selection expression = annulus(37401.187600, 30783.894600, 512.182015, 1024.364029, X, Y)
[Sun Mar  4 00:30:51 2012] Writing fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2.gif
[Sun Mar  4 00:33:05 2012] Mean detx,y = (6714.04, 8099.05) 
[Sun Mar  4 00:33:05 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 00:33:10 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 00:33:10 2012] Setting source spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar  4 00:33:10 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar  4 01:18:13 2012] Updating aperture counts using extracted products
[Sun Mar  4 01:18:13 2012] Error reading totcts from fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar  4 01:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 01:18:13 2012] Using photon index=1.80, rate=0.00393, arf fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src2.arf
[Sun Mar  4 01:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 01:18:13 2012] Updating source flux to 1e-13