[Sat Mar  3 21:52:35 2012] Detection parameters:
  Position = (466.4, 275.1) = 20 44 18.76 -31 23 7.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.6 +/- 18.6
  Background counts = 14.3
  Rate = 0.007 +/- 0.0007

[Sat Mar  3 21:52:36 2012] Off-axis axis estimate = 12.30'
[Sat Mar  3 22:07:21 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 22:07:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 22:07:21 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat Mar  3 22:07:21 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.913
[Sat Mar  3 22:07:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.58"
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5.csv
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5.csv
[Sat Mar  3 22:36:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Mar  3 22:36:20 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Mar  3 22:59:07 2012] Warning, spatial fit 5 centroid is now closest to src. 14
[Sat Mar  3 22:59:07 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 22:59:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 22:59:07 2012] Assessing source extent using major
[Sat Mar  3 22:59:07 2012] Source does appear to be extended
[Sat Mar  3 22:59:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 23:03:46 2012] Using EEF radius (= 12.58 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 23:03:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar  3 23:03:46 2012] Initial guess for spatial extent in simple fitting = 12.58"
[Sat Mar  3 23:03:46 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.913
[Sat Mar  3 23:03:46 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.58"
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5.csv
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5.csv
[Sat Mar  3 23:13:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Mar  3 23:13:41 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Mar  3 23:38:51 2012] Spatial fit model total counts = 333.434000, observed total counts = 333.000000
[Sat Mar  3 23:38:51 2012] Offset between fit and detection position for source 16 = 0.290299 pixels
[Sat Mar  3 23:38:51 2012] 336.593000 total counts/ 186.116000 bgd. counts: snr = 11.030070
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.290299 pixels
  Position = (466.1, 275.0) = 20 44 18.86 -31 23 7.5
  Extent = 6.4 (5.6-7.6)", rotation angle = 0
  Source counts = 150.5 +/- 18.3
  Background counts = 186.1
  Rate = 0.003 +/- 0.0003
[Sat Mar  3 23:38:51 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 23:38:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 23:38:51 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 23:38:51 2012] Source does appear to be extended
[Sat Mar  3 23:38:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:30:51 2012] XMMSAS src. selection expression = ellipse(40504.222440, 23879.420200, 383.427611, 383.427611, 0.000000, X, Y)
[Sun Mar  4 00:30:51 2012] Writing source region out to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16_src.reg
[Sun Mar  4 00:30:51 2012] Extracting stamp from image fullrun_mos1_xmm0111420101_pi300-10000_cl_sm2.00.img.gz, (444, 253) - (488, 297)
[Sun Mar  4 00:30:51 2012] XMMSAS bgd. selection expression = annulus(40504.222440, 23879.420200, 639.046018, 1278.092037, X, Y)
[Sun Mar  4 00:30:51 2012] Writing fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16.gif
[Sun Mar  4 00:33:30 2012] Mean detx,y = (1074.13, 13151.96) 
[Sun Mar  4 00:33:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 00:33:38 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 00:33:38 2012] Setting source spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar  4 00:33:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sun Mar  4 01:18:13 2012] Updating aperture counts using extracted products
[Sun Mar  4 01:18:13 2012] Error reading totcts from fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sun Mar  4 01:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 01:18:13 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src16.arf
[Sun Mar  4 01:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 01:18:13 2012] Updating source flux to 7.5e-14