[Sat Mar  3 21:52:35 2012] Detection parameters:
  Position = (317.1, 311.9) = 20 45 9.47 -31 20 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157128.6 +/- 477.7
  Background counts = 19.7
  Rate = 3 +/- 0.009

[Sat Mar  3 21:52:36 2012] Off-axis axis estimate = 1.67'
[Sat Mar  3 22:07:21 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Mar  3 22:07:21 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Mar  3 22:07:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.850
[Sat Mar  3 22:07:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar  3 22:36:20 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1.csv
[Sat Mar  3 22:36:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar  3 22:36:20 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar  3 22:36:20 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar  3 22:59:07 2012] Spatial fit model total counts = 134928.000000, observed total counts = 136005.000000
[Sat Mar  3 22:59:07 2012] Offset between fit and detection position for source 1 = 0.163977 pixels
[Sat Mar  3 22:59:07 2012] 134842.000000 total counts/ 25600.000000 bgd. counts: snr = 682.762500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.163977 pixels
  Position = (317.0, 311.8) = 20 45 9.52 -31 20 28.2
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 109242.0 +/- 367.2
  Background counts = 25600.0
  Rate = 2 +/- 0.007
[Sat Mar  3 22:59:07 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 22:59:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 22:59:07 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 22:59:07 2012] Source does appear to be extended
[Sat Mar  3 22:59:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar  3 23:03:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar  3 23:03:46 2012] Initial guess for spatial extent in simple fitting = 5.72"
[Sat Mar  3 23:03:46 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.214
[Sat Mar  3 23:03:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.72"
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar  3 23:13:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1.csv
[Sat Mar  3 23:13:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar  3 23:13:41 2012] fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar  3 23:13:41 2012] Fit fullrun_mos1_xmm0111420101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar  3 23:38:51 2012] Spatial fit model total counts = 134946.000000, observed total counts = 136005.000000
[Sat Mar  3 23:38:51 2012] Offset between fit and detection position for source 1 = 0.000174 pixels
[Sat Mar  3 23:38:51 2012] 134861.000000 total counts/ 25600.000000 bgd. counts: snr = 682.881250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000174 pixels
  Position = (317.0, 311.8) = 20 45 9.52 -31 20 28.2
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 109261.0 +/- 367.2
  Background counts = 25600.0
  Rate = 2 +/- 0.007
[Sat Mar  3 23:38:51 2012] Vigneting correction estimate = 1.000000
[Sat Mar  3 23:38:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar  3 23:38:51 2012] Assessing source extent using major axis lower bound
[Sat Mar  3 23:38:51 2012] Source does appear to be extended
[Sat Mar  3 23:38:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 00:30:51 2012] Counts = 109261.000000, rescaling region sizes by 3.000000
[Sun Mar  4 00:30:51 2012] XMMSAS src. selection expression = ellipse(27529.569630, 27081.172400, 1029.882630, 1029.882630, 0.000000, X, Y)
[Sun Mar  4 00:30:51 2012] Writing source region out to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_src.reg
[Sun Mar  4 00:30:51 2012] Extracting stamp from image fullrun_mos1_xmm0111420101_pi300-10000_cl_sm2.00.img.gz, (258, 253) - (376, 371)
[Sun Mar  4 00:30:51 2012] XMMSAS bgd. selection expression = annulus(27529.569630, 27081.172400, 5149.413148, 10298.826296, X, Y) && !ellipse(19144.647049, 31367.877563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37401.187600, 30783.894600, 409.745612, 409.745612, 0.000000, X, Y) && !ellipse(23895.624120, 36126.375000, 581.681617, 581.681617, 0.000000, X, Y) && !ellipse(18469.876000, 30092.532000, 1581.912046, 1581.912046, 0.000000, X, Y)
[Sun Mar  4 00:30:51 2012] Writing fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1.gif
[Sun Mar  4 00:31:00 2012] Mean detx,y = (191.75, -179.76) 
[Sun Mar  4 00:31:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 00:32:52 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 00:32:52 2012] Setting source spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar  4 00:32:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Mar  4 01:18:12 2012] Updating aperture counts using extracted products
[Sun Mar  4 01:18:12 2012] Error reading totcts from fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Mar  4 01:18:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 01:18:13 2012] Using photon index=1.80, rate=1.98, arf fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1.arf
[Sun Mar  4 01:18:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 01:18:13 2012] Updating source flux to 2.2e-11
[Sun Mar  4 01:18:51 2012] Reading fit data from xmm0111420101/analysis//spectral/fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_pl.csv
[Sun Mar  4 01:18:51 2012] Spectral fit parameter nH value = 3.89081e+21
[Sun Mar  4 01:18:51 2012] Spectral fit parameter PhoIndex value = 5.30486
[Sun Mar  4 01:18:51 2012] Failed to get F(0.3-8.0) from xmm0111420101/analysis//spectral/fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Mar  4 01:18:51 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 01:18:51 2012] Using Nh = 3.9e+21, photon index=5.30, rate=1.98, arf fullrun_mos1_xmm0111420101_pi300-10000_pass1_cl_src1.arf
[Sun Mar  4 01:18:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 01:18:51 2012] Updating source flux to 1.4e-11