[Tue Jun 11 14:30:34 2013] Detection parameters:
  Position = (163.3, 425.5) = 3 20 6.10 3 30 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.8 +/- 9.4
  Background counts = 13.6
  Rate = 0.001 +/- 0.0002

[Tue Jun 11 14:30:34 2013] Off-axis axis estimate = 13.45'
[Tue Jun 11 14:31:41 2013] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 14:31:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun 11 14:31:41 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Tue Jun 11 14:31:41 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.987
[Tue Jun 11 14:31:41 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.15"
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3.csv
[Tue Jun 11 14:45:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue Jun 11 14:45:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:50:19 2013] Spatial fit model total counts = 198.677000, observed total counts = 172.000000
[Tue Jun 11 14:50:19 2013] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 14:50:19 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 14:50:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 14:50:19 2013] Assessing source extent using major
[Tue Jun 11 14:50:19 2013] Source does appear to be extended
[Tue Jun 11 14:50:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 14:50:19 2013] Deleting source due to low Poisson probability 0.8