[Tue Jun 11 14:30:34 2013] Detection parameters:
  Position = (376.5, 216.3) = 3 19 4.15 3 15 15.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.9 +/- 9.2
  Background counts = 16.4
  Rate = 0.002 +/- 0.0004

[Tue Jun 11 14:30:34 2013] Off-axis axis estimate = 8.22'
[Tue Jun 11 14:31:41 2013] Using EEF radius (= 10.54 ")to estimate initial spatial extent for simple fitting
[Tue Jun 11 14:31:41 2013] Initial guess for spatial extent in simple fitting = 10.54"
[Tue Jun 11 14:31:41 2013] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.878
[Tue Jun 11 14:31:41 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.54"
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10.csv
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10.csv
[Tue Jun 11 14:45:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 11 14:45:29 2013] fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jun 11 14:45:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jun 11 14:45:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111410101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 11 14:50:19 2013] Spatial fit model total counts = 197.947000, observed total counts = 177.000000
[Tue Jun 11 14:50:19 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun 11 14:50:19 2013] Vigneting correction estimate = 1.000000
[Tue Jun 11 14:50:19 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 11 14:50:19 2013] Assessing source extent using major
[Tue Jun 11 14:50:19 2013] Source does appear to be extended
[Tue Jun 11 14:50:19 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 11 14:50:19 2013] Deleting source due to low Poisson probability 0.8