[Mon Oct  3 23:32:01 2011] Detection parameters:
  Position = (336.3, 179.1) = 8 38 38.15 64 54 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 9.2
  Background counts = 13.6
  Rate = 0.0007 +/- 0.0002

[Mon Oct  3 23:32:01 2011] Off-axis axis estimate = 9.08'
[Mon Oct  3 23:32:57 2011] Using EEF radius (= 10.97 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 23:32:57 2011] Initial guess for spatial extent in simple fitting = 10.97"
[Mon Oct  3 23:32:57 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.986
[Mon Oct  3 23:32:57 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 10.97"
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src35.ximg exists
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Oct  4 00:04:50 2011] Fit fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue Oct  4 00:04:51 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Oct  4 00:04:51 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Oct  4 00:04:51 2011] Fit fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Oct  4 00:30:55 2011] Spatial fit model total counts = 178.418000, observed total counts = 179.000000
[Tue Oct  4 00:30:55 2011] Offset between fit and detection position for source 36 = 4.031982 pixels
[Tue Oct  4 00:30:55 2011] 174.584800 total counts/ 76.591000 bgd. counts: snr = 11.197208
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 4.031982 pixels
  Position = (339.7, 177.0) = 8 38 35.80 64 53 53.7
  Extent = 21.9 (21.9-43.9)", rotation angle = 0
  Source counts = 98.0 +/- 13.2
  Background counts = 76.6
  Rate = 0.002 +/- 0.0003
[Tue Oct  4 00:30:55 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:30:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:30:55 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:30:55 2011] Source does appear to be extended
[Tue Oct  4 00:30:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:31:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:31:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Oct  4 00:31:03 2011] Initial guess for spatial extent in simple fitting = 21.93"
[Tue Oct  4 00:31:03 2011] source mask rpix=5.0, npix_max = 122, mask sum = 132, frac = 1.074
[Tue Oct  4 00:31:03 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 21.93"
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26.ximg exists
[Tue Oct  4 00:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26.csv
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26_1.ximg exists
[Tue Oct  4 00:58:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26.csv
[Tue Oct  4 00:58:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Tue Oct  4 00:58:33 2011] Fit fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Tue Oct  4 01:21:33 2011] Warning, spatial fit 26 centroid is now closest to src. 35
[Tue Oct  4 01:21:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 01:21:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 01:21:33 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 01:21:33 2011] Source does appear to be extended
[Tue Oct  4 01:21:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 01:21:39 2011] XMMSAS src. selection expression = ellipse(29509.472000, 15349.948000, 1316.088038, 1316.088038, 0.000000, X, Y)
[Tue Oct  4 01:21:39 2011] Writing source region out to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36_src.reg
[Tue Oct  4 01:21:39 2011] Extracting stamp from image fullrun_mos1_xmm0111400101_pi300-10000_cl_sm2.00.img.gz, (264, 101) - (415, 253)
[Tue Oct  4 01:21:40 2011] XMMSAS bgd. selection expression = annulus(29509.472000, 15349.948000, 2193.480063, 4386.960126, X, Y) && !ellipse(26665.703340, 19884.960400, 281.061608, 281.061608, 0.000000, X, Y) && !ellipse(25822.201200, 18902.312120, 358.608010, 358.608010, 0.000000, X, Y) && !ellipse(34238.874908, 18857.998138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.276581, 16130.736115, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Oct  4 01:21:40 2011] Writing fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36.gif
[Tue Oct  4 01:27:38 2011] Mean detx,y = (9557.49, -3495.62) 
[Tue Oct  4 01:27:39 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 01:28:05 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 01:28:05 2011] Setting source spectrum file to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Oct  4 01:28:05 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Tue Oct  4 01:47:49 2011] Not generating rmf since there are only 97 counts
[Tue Oct  4 01:47:49 2011] rmf not generated due to insufficient counts
[Tue Oct  4 01:59:08 2011] Updating aperture counts using extracted products
[Tue Oct  4 01:59:08 2011] Error reading totcts from fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Tue Oct  4 01:59:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 01:59:08 2011] Using photon index=1.80, rate=0.00196, arf fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src36.arf
[Tue Oct  4 01:59:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 01:59:08 2011] Updating source flux to 3.4e-14
[Tue Oct  4 01:59:10 2011] Source 36 has fewer than 100.000000 counts, skipping spectral fitting