[Mon Oct  3 23:32:01 2011] Detection parameters:
  Position = (286.9, 278.9) = 8 39 11.94 65 1 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27063.1 +/- 198.0
  Background counts = 20.4
  Rate = 0.5 +/- 0.004

[Mon Oct  3 23:32:01 2011] Off-axis axis estimate = 1.65'
[Mon Oct  3 23:32:57 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 23:32:57 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Mon Oct  3 23:32:57 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon Oct  3 23:32:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Oct  4 00:04:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Oct  4 00:04:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1.csv
[Tue Oct  4 00:04:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Oct  4 00:04:50 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Oct  4 00:04:50 2011] Fit fullrun_mos1_xmm0111400101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Oct  4 00:30:55 2011] Spatial fit model total counts = 23505.500000, observed total counts = 23536.000000
[Tue Oct  4 00:30:55 2011] Offset between fit and detection position for source 1 = 0.096501 pixels
[Tue Oct  4 00:30:55 2011] 23430.430000 total counts/ 4848.430000 bgd. counts: snr = 266.865167
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.096501 pixels
  Position = (286.9, 278.8) = 8 39 11.96 65 1 16.6
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 18582.0 +/- 153.1
  Background counts = 4848.4
  Rate = 0.4 +/- 0.003
[Tue Oct  4 00:30:55 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 00:30:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 00:30:55 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 00:30:55 2011] Source does appear to be extended
[Tue Oct  4 00:30:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 00:31:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct  4 00:31:03 2011] Initial guess for spatial extent in simple fitting = 5.71"
[Tue Oct  4 00:31:03 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.216
[Tue Oct  4 00:31:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.71"
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Oct  4 00:58:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Oct  4 00:58:33 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1.csv
[Tue Oct  4 00:58:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Oct  4 00:58:33 2011] fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Oct  4 00:58:33 2011] Fit fullrun_mos1_xmm0111400101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Oct  4 01:21:33 2011] Spatial fit model total counts = 23523.400000, observed total counts = 23536.000000
[Tue Oct  4 01:21:33 2011] Offset between fit and detection position for source 1 = 0.000844 pixels
[Tue Oct  4 01:21:33 2011] 23448.090000 total counts/ 4864.890000 bgd. counts: snr = 266.430530
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000844 pixels
  Position = (286.9, 278.8) = 8 39 11.96 65 1 16.6
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 18583.2 +/- 153.1
  Background counts = 4864.9
  Rate = 0.4 +/- 0.003
[Tue Oct  4 01:21:33 2011] Vigneting correction estimate = 1.000000
[Tue Oct  4 01:21:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct  4 01:21:33 2011] Assessing source extent using major axis lower bound
[Tue Oct  4 01:21:33 2011] Source does appear to be extended
[Tue Oct  4 01:21:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct  4 01:21:39 2011] Counts = 18583.200000, rescaling region sizes by 3.000000
[Tue Oct  4 01:21:39 2011] XMMSAS src. selection expression = ellipse(24911.987760, 24205.080800, 1024.531229, 1024.531229, 0.000000, X, Y)
[Tue Oct  4 01:21:39 2011] Writing source region out to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_src.reg
[Tue Oct  4 01:21:39 2011] Extracting stamp from image fullrun_mos1_xmm0111400101_pi300-10000_cl_sm2.00.img.gz, (228, 220) - (346, 338)
[Tue Oct  4 01:21:39 2011] XMMSAS bgd. selection expression = annulus(24911.987760, 24205.080800, 5122.656147, 10245.312295, X, Y) && !ellipse(15567.178000, 30665.492000, 442.959213, 442.959213, 0.000000, X, Y) && !ellipse(19475.127000, 28265.465400, 374.220811, 374.220811, 0.000000, X, Y) && !ellipse(23862.669952, 27809.588715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24167.082800, 23154.915600, 300.480809, 274.076008, 267.992939, X, Y) && !ellipse(31050.333600, 31406.769000, 602.316017, 602.316017, 0.000000, X, Y) && !ellipse(25679.662000, 33905.020000, 799.194423, 461.380013, 24.659282, X, Y) && !ellipse(22450.615400, 32379.221400, 508.103215, 508.103215, 0.000000, X, Y) && !ellipse(14921.337082, 31197.063599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19220.542389, 21144.285019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33244.173492, 21066.444870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26665.703340, 19884.960400, 281.061608, 281.061608, 0.000000, X, Y) && !ellipse(25822.201200, 18902.312120, 358.608010, 358.608010, 0.000000, X, Y) && !ellipse(34238.874908, 18857.998138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25015.276581, 16130.736115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29509.472000, 15349.948000, 1754.784050, 1754.784050, 0.000000, X, Y)
[Tue Oct  4 01:21:39 2011] Writing fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1.gif
[Tue Oct  4 01:21:44 2011] Mean detx,y = (154.51, -133.41) 
[Tue Oct  4 01:21:45 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Oct  4 01:23:49 2011] Binned source spectrum to 10 counts/bin
[Tue Oct  4 01:23:49 2011] Setting source spectrum file to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Oct  4 01:23:49 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Oct  4 01:59:07 2011] Updating aperture counts using extracted products
[Tue Oct  4 01:59:07 2011] Error reading totcts from fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Oct  4 01:59:08 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 01:59:08 2011] Using photon index=1.80, rate=0.371, arf fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1.arf
[Tue Oct  4 01:59:08 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 01:59:08 2011] Updating source flux to 4.1e-12
[Tue Oct  4 02:00:57 2011] Reading fit data from xmm0111400101/analysis//spectral/fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Oct  4 02:00:57 2011] Spectral fit parameter nH value = 1.09493e+22
[Tue Oct  4 02:00:57 2011] Spectral fit parameter PhoIndex value = 9.994
[Tue Oct  4 02:00:57 2011] Failed to get F(0.3-8.0) from xmm0111400101/analysis//spectral/fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Oct  4 02:00:57 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct  4 02:00:57 2011] Using Nh = 1.1e+22, photon index=9.99, rate=0.371, arf fullrun_mos1_xmm0111400101_pi300-10000_pass1_cl_src1.arf
[Tue Oct  4 02:00:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Oct  4 02:00:57 2011] Updating source flux to 2.4e-12