[Wed Nov 30 17:24:06 2011] Detection parameters:
  Position = (319.3, 307.2) = 3 26 35.40 28 42 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243370.6 +/- 558.3
  Background counts = 22.5
  Rate = 9 +/- 0.02

[Wed Nov 30 17:24:07 2011] Off-axis axis estimate = 1.64'
[Wed Nov 30 17:59:16 2011] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:59:16 2011] Initial guess for spatial extent in simple fitting = 7.25"
[Wed Nov 30 17:59:16 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Wed Nov 30 17:59:16 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Wed Nov 30 18:48:54 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 18:48:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 18:48:54 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 18:48:54 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 18:48:54 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 18:48:55 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 18:48:55 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 18:48:55 2011] Fit fullrun_mos2_xmm0111390301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 18:49:06 2011] Spatial fit model total counts = 208705.000000, observed total counts = 215713.000000
[Wed Nov 30 18:49:06 2011] Offset between fit and detection position for source 1 = 0.213913 pixels
[Wed Nov 30 18:49:06 2011] 208573.000000 total counts/ 25600.000000 bgd. counts: snr = 1143.581250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.213913 pixels
  Position = (319.2, 307.4) = 3 26 35.44 28 42 50.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 182973.0 +/- 456.7
  Background counts = 25600.0
  Rate = 6 +/- 0.02
[Wed Nov 30 18:49:06 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 18:49:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 18:49:06 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 18:49:06 2011] Source does appear to be extended
[Wed Nov 30 18:49:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:19:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 19:19:52 2011] Initial guess for spatial extent in simple fitting = 6.19"
[Wed Nov 30 19:19:52 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.082
[Wed Nov 30 19:19:52 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.19"
[Wed Nov 30 19:44:26 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 19:44:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 19:44:26 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 19:44:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 19:44:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 19:44:26 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 19:44:26 2011] fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 19:44:26 2011] Fit fullrun_mos2_xmm0111390301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 19:44:30 2011] Spatial fit model total counts = 208838.000000, observed total counts = 215713.000000
[Wed Nov 30 19:44:30 2011] Offset between fit and detection position for source 1 = 0.000870 pixels
[Wed Nov 30 19:44:30 2011] 208706.000000 total counts/ 25600.000000 bgd. counts: snr = 1144.412500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000870 pixels
  Position = (319.2, 307.4) = 3 26 35.44 28 42 50.5
  Extent = 6.2 (6.2-6.2)", rotation angle = 0
  Source counts = 183106.0 +/- 456.8
  Background counts = 25600.0
  Rate = 6 +/- 0.02
[Wed Nov 30 19:44:30 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 19:44:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 19:44:30 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 19:44:30 2011] Source does appear to be extended
[Wed Nov 30 19:44:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 19:57:28 2011] Counts = 183106.000000, rescaling region sizes by 3.000000
[Wed Nov 30 19:57:28 2011] XMMSAS src. selection expression = ellipse(27721.263300, 26696.280400, 1114.234232, 1114.234232, 0.000000, X, Y)
[Wed Nov 30 19:57:28 2011] Writing source region out to fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 19:57:28 2011] Extracting stamp from image fullrun_mos2_xmm0111390301_pi300-10000_cl_sm2.00.img.gz, (255, 243) - (383, 371)
[Wed Nov 30 19:57:28 2011] XMMSAS bgd. selection expression = annulus(27721.263300, 26696.280400, 5571.171160, 11142.342321, X, Y) && !ellipse(28457.636230, 26143.178162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34406.188000, 18253.676000, 1742.032050, 1742.032050, 0.000000, X, Y)
[Wed Nov 30 19:57:28 2011] Writing fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 19:57:49 2011] Mean detx,y = (-12.73, -83.06) 
[Wed Nov 30 19:57:54 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Nov 30 20:03:08 2011] Binned source spectrum to 10 counts/bin
[Wed Nov 30 20:03:08 2011] Setting source spectrum file to fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 20:03:08 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 20:20:52 2011] Updating aperture counts using extracted products
[Wed Nov 30 20:20:52 2011] Error reading totcts from fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 20:20:52 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:20:52 2011] Using photon index=1.80, rate=6.24, arf fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 20:20:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:20:52 2011] Updating source flux to 6.3e-11
[Wed Nov 30 20:21:40 2011] Reading fit data from xmm0111390301/analysis//spectral/fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Nov 30 20:21:40 2011] Spectral fit parameter nH value = 1.80661e+21
[Wed Nov 30 20:21:40 2011] Spectral fit parameter PhoIndex value = 3.16747
[Wed Nov 30 20:21:40 2011] Failed to get F(0.3-8.0) from xmm0111390301/analysis//spectral/fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 20:21:40 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 20:21:40 2011] Using Nh = 1.8e+21, photon index=3.17, rate=6.24, arf fullrun_mos2_xmm0111390301_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 20:21:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 20:21:40 2011] Updating source flux to 4.6e-11