[Fri Jun  7 06:07:28 2013] Detection parameters:
  Position = (405.3, 265.7) = 3 26 6.97 28 39 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.6 +/- 13.0
  Background counts = 36.7
  Rate = 0.01 +/- 0.001

[Fri Jun  7 06:07:28 2013] Off-axis axis estimate = 8.10'
[Fri Jun  7 06:16:32 2013] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 06:16:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 06:16:32 2013] Initial guess for spatial extent in simple fitting = 10.48"
[Fri Jun  7 06:16:32 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.945
[Fri Jun  7 06:16:32 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 10.48"
[Fri Jun  7 07:25:56 2013] fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun  7 07:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4.csv
[Fri Jun  7 07:25:56 2013] fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun  7 07:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4.csv
[Fri Jun  7 07:25:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 07:25:56 2013] fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun  7 07:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  7 07:25:56 2013] fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun  7 07:25:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun  7 07:25:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 07:25:59 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.658378 pixels away
[Fri Jun  7 07:25:59 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 07:25:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 07:25:59 2013] Assessing source extent using major
[Fri Jun  7 07:25:59 2013] Source does appear to be extended
[Fri Jun  7 07:25:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 07:25:59 2013] Deleting source due to low Poisson probability 0.7