[Fri Jun  7 06:06:59 2013] Detection parameters:
  Position = (460.4, 180.0) = 3 25 48.84 28 33 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.5 +/- 13.9
  Background counts = 21.6
  Rate = 0.005 +/- 0.001

[Fri Jun  7 06:06:59 2013] Off-axis axis estimate = 14.54'
[Fri Jun  7 06:08:34 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 06:08:34 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  7 06:08:34 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Jun  7 06:08:34 2013] source mask rpix=3.1, npix_max = 53, mask sum = 54, frac = 1.014
[Fri Jun  7 06:08:34 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 13.70"
[Fri Jun  7 06:16:32 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jun  7 06:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5.csv
[Fri Jun  7 06:16:32 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jun  7 06:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5.csv
[Fri Jun  7 06:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 06:16:32 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jun  7 06:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  7 06:16:32 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jun  7 06:16:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jun  7 06:16:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111390101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 07:25:58 2013] Spatial fit model total counts = 339.192000, observed total counts = 300.000000
[Fri Jun  7 07:25:58 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 07:25:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 07:25:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 07:25:58 2013] Assessing source extent using major
[Fri Jun  7 07:25:58 2013] Source does appear to be extended
[Fri Jun  7 07:25:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 07:26:02 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Fri Jun  7 07:26:02 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Jun  7 07:26:02 2013] source mask rpix=3.1, npix_max = 53, mask sum = 54, frac = 1.014
[Fri Jun  7 07:26:02 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.70"
[Fri Jun  7 07:37:10 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jun  7 07:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5.csv
[Fri Jun  7 07:37:10 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jun  7 07:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5.csv
[Fri Jun  7 07:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 07:37:10 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jun  7 07:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun  7 07:37:10 2013] fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jun  7 07:37:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri Jun  7 07:37:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111390101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  7 07:38:39 2013] Spatial fit model total counts = 339.192000, observed total counts = 300.000000
[Fri Jun  7 07:38:39 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  7 07:38:39 2013] Vigneting correction estimate = 1.000000
[Fri Jun  7 07:38:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  7 07:38:39 2013] Assessing source extent using major
[Fri Jun  7 07:38:39 2013] Source does appear to be extended
[Fri Jun  7 07:38:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  7 07:38:42 2013] XMMSAS src. selection expression = ellipse(40002.258514, 15610.595963, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun  7 07:38:42 2013] Writing source region out to fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun  7 07:38:42 2013] Extracting stamp from image fullrun_mos1_xmm0111390101_pi300-10000_cl_sm2.00.img.gz, (423, 142) - (498, 217)
[Fri Jun  7 07:38:42 2013] XMMSAS bgd. selection expression = annulus(40002.258514, 15610.595963, 1087.500000, 2175.000000, X, Y)
[Fri Jun  7 07:38:42 2013] Writing fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5.gif
[Fri Jun  7 07:40:15 2013] Mean detx,y = (-3825.13, 15864.83) 
[Fri Jun  7 07:40:16 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  7 07:40:31 2013] Binned source spectrum to 10 counts/bin
[Fri Jun  7 07:40:32 2013] Setting source spectrum file to fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun  7 07:40:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun  7 07:44:42 2013] Not generating rmf since there are only 66 counts
[Fri Jun  7 07:44:42 2013] rmf not generated due to insufficient counts
[Fri Jun  7 07:54:16 2013] Updating aperture counts using extracted products
[Fri Jun  7 07:54:16 2013] Total counts from fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 172.00
[Fri Jun  7 07:54:16 2013] Total counts from fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 801.00
[Fri Jun  7 07:54:16 2013] Got source and background scale factors 1183756.000000, 6429050.000000
[Fri Jun  7 07:54:16 2013] User source parameters:
  Position = (460.4, 180.0) = 3 25 48.84 28 33 37.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 24.5 +/- 14.1
  Background aperture counts = 147.5
  Rate = 0.002 +/- 0.001

[Fri Jun  7 07:54:16 2013] Updating counts from extracted products
[Fri Jun  7 07:54:16 2013] Set source signif. to 24.51/12.14 = 2.02
[Fri Jun  7 07:54:16 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun  7 07:54:16 2013] Using photon index=1.80, rate=0.00177, arf fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5.arf
[Fri Jun  7 07:54:16 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  7 07:54:16 2013] Updating source flux to 5.7e-14
[Fri Jun  7 07:54:18 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun  7 07:54:19 2013] xmm0111390101/analysis//spectral/fullrun_mos1_xmm0111390101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete