[Mon May 27 10:33:30 2013] Detection parameters:
  Position = (213.9, 429.4) = 22 9 24.35 45 53 13.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.7 +/- 20.7
  Background counts = 189.5
  Rate = 0.004 +/- 0.0007

[Mon May 27 10:33:35 2013] Off-axis axis estimate = 11.30'
[Mon May 27 10:35:22 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Mon May 27 10:35:22 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Mon May 27 10:35:22 2013] source mask rpix=2.8, npix_max = 42, mask sum = 39, frac = 0.908
[Mon May 27 10:35:22 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 12.08"
[Mon May 27 20:00:55 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7.ximg exists
[Mon May 27 20:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7.csv
[Mon May 27 20:00:55 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon May 27 20:00:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7.csv
[Mon May 27 20:00:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:00:59 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon May 27 20:00:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 27 20:00:59 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon May 27 20:00:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7.csv
[Mon May 27 20:00:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:01:39 2013] Warning, spatial fit 7 centroid is now closest to src. 10
[Mon May 27 20:01:39 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:01:39 2013] Assessing source extent using major
[Mon May 27 20:01:39 2013] Source does appear to be extended
[Mon May 27 20:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:01:56 2013] Using EEF radius (= 12.08 ")to estimate initial spatial extent for simple fitting
[Mon May 27 20:01:56 2013] Initial guess for spatial extent in simple fitting = 12.08"
[Mon May 27 20:01:56 2013] source mask rpix=2.8, npix_max = 42, mask sum = 39, frac = 0.908
[Mon May 27 20:01:56 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 12.08"
[Tue May 28 03:21:15 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 28 03:21:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6.csv
[Tue May 28 03:21:15 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 28 03:21:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6.csv
[Tue May 28 03:21:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:17 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 28 03:21:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May 28 03:21:17 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 28 03:21:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Tue May 28 03:21:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:51 2013] Source 9 is offset by -0.265489 and -8.342816 pixels which is larger than
2 X fitted extent = 1.388281 x 1.388281, not incorporating fit results
[Tue May 28 03:21:51 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:21:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:21:51 2013] Assessing source extent using major
[Tue May 28 03:21:51 2013] Source does appear to be extended
[Tue May 28 03:21:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 03:22:02 2013] XMMSAS src. selection expression = ellipse(18563.974884, 37308.179047, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 03:22:02 2013] Writing source region out to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_src.reg
[Tue May 28 03:22:02 2013] Extracting stamp from image fullrun_mos2_xmm0111370101_pi300-10000_cl_sm2.00.img.gz, (176, 392) - (251, 467)
[Tue May 28 03:22:02 2013] XMMSAS bgd. selection expression = annulus(18563.974884, 37308.179047, 1087.500000, 2175.000000, X, Y) && !ellipse(15890.003281, 37836.131622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.157028, 35966.701599, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 03:22:02 2013] Writing fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9.gif
[Tue May 28 03:32:02 2013] Mean detx,y = (12332.18, 5987.18) 
[Tue May 28 03:32:04 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 03:32:56 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 03:32:56 2013] Setting source spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Tue May 28 03:32:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue May 28 04:04:24 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 04:04:24 2013] rmf not generated due to insufficient counts
[Tue May 28 04:05:48 2013] Updating aperture counts using extracted products
[Tue May 28 04:05:48 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 33.00
[Tue May 28 04:05:49 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 210.00
[Tue May 28 04:05:49 2013] Got source and background scale factors 1069590.000000, 6783619.000000
[Tue May 28 04:05:49 2013] User source parameters:
  Position = (213.9, 429.4) = 22 9 24.35 45 53 13.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -0.1 +/- 6.8
  Background aperture counts = 33.1
  Rate = -5e-06 +/- 0.0003

[Tue May 28 04:05:49 2013] Updating counts from extracted products
[Tue May 28 04:05:49 2013] Set source signif. to -0.11/5.75 = -0.02
[Tue May 28 04:06:05 2013] No arf file for this source, not re-computing flux
[Tue May 28 04:06:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 04:06:08 2013] xmm0111370101/analysis//spectral/fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete