[Mon May 27 10:33:33 2013] Detection parameters:
  Position = (381.4, 126.3) = 22 8 14.80 45 31 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 135.5 +/- 18.7
  Background counts = 42.0
  Rate = 0.004 +/- 0.0006

[Mon May 27 10:33:35 2013] Off-axis axis estimate = 13.85'
[Mon May 27 10:35:22 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Mon May 27 10:35:22 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Mon May 27 10:35:22 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Mon May 27 10:35:22 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 13.36"
[Mon May 27 20:00:57 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67.ximg exists
[Mon May 27 20:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67.csv
[Mon May 27 20:00:57 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67_1.ximg exists
[Mon May 27 20:00:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67.csv
[Mon May 27 20:00:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:01:02 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Mon May 27 20:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Mon May 27 20:01:02 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Mon May 27 20:01:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Mon May 27 20:01:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 27 20:01:39 2013] Warning, spatial fit 67 centroid is now closest to src. 71
[Mon May 27 20:01:40 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:01:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:01:40 2013] Assessing source extent using major
[Mon May 27 20:01:40 2013] Source does appear to be extended
[Mon May 27 20:01:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:01:56 2013] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Mon May 27 20:01:56 2013] Initial guess for spatial extent in simple fitting = 13.36"
[Mon May 27 20:01:56 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.961
[Mon May 27 20:01:56 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 13.36"
[Tue May 28 03:21:16 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53.ximg exists
[Tue May 28 03:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53.csv
[Tue May 28 03:21:16 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53_1.ximg exists
[Tue May 28 03:21:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53.csv
[Tue May 28 03:21:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:18 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Tue May 28 03:21:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue May 28 03:21:18 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Tue May 28 03:21:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53.csv
[Tue May 28 03:21:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:51 2013] Source 69 is offset by -8.554033 and 3.313814 pixels which is larger than
2 X fitted extent = 1.498524 x 1.498524, not incorporating fit results
[Tue May 28 03:21:51 2013] Source 69 is offset by 4.990679 and -1.506880 pixels which is larger than
2 X fitted extent = 2.909462 x 12.280598, not incorporating fit results
[Tue May 28 03:21:51 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:21:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:21:51 2013] Assessing source extent using major
[Tue May 28 03:21:51 2013] Source does appear to be extended
[Tue May 28 03:21:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 03:22:04 2013] XMMSAS src. selection expression = ellipse(33136.273102, 10941.827835, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 03:22:04 2013] Writing source region out to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_src.reg
[Tue May 28 03:22:04 2013] Extracting stamp from image fullrun_mos2_xmm0111370101_pi300-10000_cl_sm2.00.img.gz, (344, 89) - (419, 164)
[Tue May 28 03:22:04 2013] XMMSAS bgd. selection expression = annulus(33136.273102, 10941.827835, 1087.500000, 2175.000000, X, Y) && !ellipse(35469.781006, 13534.263489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.541046, 12205.327072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35485.405853, 12062.194443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33766.364655, 11684.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32920.249298, 11685.465698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34245.297424, 11438.745773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31415.545959, 11244.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.534607, 11252.717163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31927.719696, 10824.185478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30793.377014, 12959.077942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.769348, 12025.671860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34993.920105, 12047.022278, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 03:22:04 2013] Writing fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69.gif
[Tue May 28 03:51:10 2013] Mean detx,y = (-11064.49, -12781.57) 
[Tue May 28 03:51:13 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 03:51:36 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 03:51:36 2013] Setting source spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue May 28 03:51:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue May 28 04:04:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 04:04:47 2013] rmf not generated due to insufficient counts
[Tue May 28 04:05:58 2013] Updating aperture counts using extracted products
[Tue May 28 04:05:58 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 51.00
[Tue May 28 04:05:58 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_bgd.pi.gz = 32.00
[Tue May 28 04:05:58 2013] Got source and background scale factors 1156412.000000, 957682.000000
[Tue May 28 04:05:58 2013] User source parameters:
  Position = (381.4, 126.3) = 22 8 14.80 45 31 12.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 12.4 +/- 8.2
  Background aperture counts = 38.6
  Rate = 0.0006 +/- 0.0004

[Tue May 28 04:05:58 2013] Updating counts from extracted products
[Tue May 28 04:05:58 2013] Set source signif. to 12.36/6.22 = 1.99
[Tue May 28 04:06:05 2013] No arf file for this source, not re-computing flux
[Tue May 28 04:06:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 04:06:08 2013] xmm0111370101/analysis//spectral/fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete