[Mon May 27 10:33:32 2013] Detection parameters:
  Position = (329.9, 121.9) = 22 8 36.11 45 30 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.1 +/- 17.1
  Background counts = 27.0
  Rate = 0.004 +/- 0.0006

[Mon May 27 10:33:35 2013] Off-axis axis estimate = 13.00'
[Mon May 27 10:35:22 2013] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Mon May 27 10:35:22 2013] Initial guess for spatial extent in simple fitting = 12.93"
[Mon May 27 10:35:22 2013] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.995
[Mon May 27 10:35:22 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 12.93"
[Mon May 27 20:00:56 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src43.ximg exists
[Mon May 27 20:00:56 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src43_1.ximg exists
[Mon May 27 20:00:56 2013] Fit fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_src43 appears to have run properly
[Mon May 27 20:01:01 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Mon May 27 20:01:01 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Mon May 27 20:01:01 2013] Fit fullrun_mos2_xmm0111370101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Mon May 27 20:01:39 2013] Warning, spatial fit 43 centroid is now closest to src. 73
[Mon May 27 20:01:39 2013] Source 45 is offset by 2.633978 and -5.202629 pixels which is larger than
2 X fitted extent = 1.440621 x 1.438915, not incorporating fit results
[Mon May 27 20:01:39 2013] Source 45 is offset by 2.812967 and -4.518399 pixels which is larger than
2 X fitted extent = 1.496276 x 1.496276, not incorporating fit results
[Mon May 27 20:01:39 2013] Vigneting correction estimate = 1.000000
[Mon May 27 20:01:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 27 20:01:39 2013] Assessing source extent using major
[Mon May 27 20:01:39 2013] Source does appear to be extended
[Mon May 27 20:01:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 27 20:01:40 2013] Source is confused with source 12
[Mon May 27 20:01:56 2013] Using EEF radius (= 12.93 ")to estimate initial spatial extent for simple fitting
[Mon May 27 20:01:56 2013] Initial guess for spatial extent in simple fitting = 12.93"
[Mon May 27 20:01:56 2013] source mask rpix=3.0, npix_max = 48, mask sum = 48, frac = 0.995
[Mon May 27 20:01:56 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 12.93"
[Tue May 28 03:21:15 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34.ximg exists
[Tue May 28 03:21:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34.csv
[Tue May 28 03:21:15 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34_1.ximg exists
[Tue May 28 03:21:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34.csv
[Tue May 28 03:21:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:18 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Tue May 28 03:21:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 28 03:21:18 2013] fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Tue May 28 03:21:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Tue May 28 03:21:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111370101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 03:21:51 2013] Source 45 is offset by 2.343850 and -6.877089 pixels which is larger than
2 X fitted extent = 1.925871 x 1.925871, not incorporating fit results
[Tue May 28 03:21:51 2013] Warning, spatial fit 34 centroid is now closest to src. 109
[Tue May 28 03:21:51 2013] Source 45 is offset by 2.535404 and -5.178675 pixels which is larger than
2 X fitted extent = 1.426510 x 1.426510, not incorporating fit results
[Tue May 28 03:21:51 2013] Vigneting correction estimate = 1.000000
[Tue May 28 03:21:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 03:21:51 2013] Assessing source extent using major
[Tue May 28 03:21:51 2013] Source does appear to be extended
[Tue May 28 03:21:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 03:22:03 2013] XMMSAS src. selection expression = ellipse(28656.758118, 10557.605270, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 28 03:22:03 2013] Writing source region out to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_src.reg
[Tue May 28 03:22:03 2013] Extracting stamp from image fullrun_mos2_xmm0111370101_pi300-10000_cl_sm2.00.img.gz, (292, 84) - (367, 159)
[Tue May 28 03:22:03 2013] XMMSAS bgd. selection expression = annulus(28656.758118, 10557.605270, 1087.500000, 2175.000000, X, Y) && !ellipse(26800.536865, 10158.882263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27511.983826, 10474.055481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29821.147766, 10471.637413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29150.670563, 11927.828720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29803.815735, 11878.923080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31415.545959, 11244.523743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30272.534607, 11252.717163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30060.549103, 10904.588394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27954.059479, 10739.948036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26836.650574, 10730.012917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25898.084442, 10652.065239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30793.377014, 12959.077942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29401.015930, 12424.649750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.769348, 12025.671860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26499.079529, 11000.181396, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 28 03:22:03 2013] Writing fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45.gif
[Tue May 28 03:44:04 2013] Mean detx,y = (-7073.92, -14662.83) 
[Tue May 28 03:44:06 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 28 03:44:26 2013] Binned source spectrum to 10 counts/bin
[Tue May 28 03:44:27 2013] Setting source spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Tue May 28 03:44:27 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Tue May 28 04:04:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 28 04:04:38 2013] rmf not generated due to insufficient counts
[Tue May 28 04:05:54 2013] Updating aperture counts using extracted products
[Tue May 28 04:05:54 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 63.00
[Tue May 28 04:05:54 2013] Total counts from fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_bgd.pi.gz = 45.00
[Tue May 28 04:05:54 2013] Got source and background scale factors 1254648.000000, 1269471.000000
[Tue May 28 04:05:54 2013] User source parameters:
  Position = (329.9, 121.9) = 22 8 36.11 45 30 55.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 18.5 +/- 9.0
  Background aperture counts = 44.5
  Rate = 0.0009 +/- 0.0004

[Tue May 28 04:05:54 2013] Updating counts from extracted products
[Tue May 28 04:05:54 2013] Set source signif. to 18.53/6.67 = 2.78
[Tue May 28 04:06:05 2013] No arf file for this source, not re-computing flux
[Tue May 28 04:06:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 28 04:06:08 2013] xmm0111370101/analysis//spectral/fullrun_mos2_xmm0111370101_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete