[Sun May 20 10:11:43 2012] Detection parameters:
  Position = (296.4, 264.2) = 17 2 45.02 -48 48 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.0 +/- 22.4
  Background counts = 57.8
  Rate = 0.06 +/- 0.006

[Sun May 20 10:11:44 2012] Off-axis axis estimate = 2.49'
[Sun May 20 10:13:59 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:13:59 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sun May 20 10:13:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.976
[Sun May 20 10:13:59 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 7.67"
[Sun May 20 13:08:01 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_src24.ximg exists
[Sun May 20 13:08:01 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_src24_1.ximg exists
[Sun May 20 13:08:01 2012] Fit fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_src24 appears to have run properly
[Sun May 20 13:08:02 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sun May 20 13:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 20 13:08:02 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sun May 20 13:08:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sun May 20 13:08:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360501_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:21:54 2012] Source 25 is offset by -1.501079 and -7.779164 pixels which is larger than
2 X fitted extent = 2.490391 x 2.490391, not incorporating fit results
[Sun May 20 13:21:54 2012] Warning, spatial fit 24 centroid is now closest to src. 22
[Sun May 20 13:21:54 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 10.660277 pixels away
[Sun May 20 13:21:54 2012] Vigneting correction estimate = 1.000000
[Sun May 20 13:21:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 13:21:54 2012] Assessing source extent using major
[Sun May 20 13:21:54 2012] Source does appear to be extended
[Sun May 20 13:21:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 13:21:54 2012] Source is confused with source 27
[Sun May 20 13:22:08 2012] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sun May 20 13:22:08 2012] Initial guess for spatial extent in simple fitting = 7.67"
[Sun May 20 13:22:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.976
[Sun May 20 13:22:08 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 7.67"
[Sun May 20 16:15:46 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24.ximg exists
[Sun May 20 16:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24.csv
[Sun May 20 16:15:46 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24_1.ximg exists
[Sun May 20 16:15:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24.csv
[Sun May 20 16:15:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 16:15:47 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sun May 20 16:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun May 20 16:15:47 2012] fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sun May 20 16:15:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sun May 20 16:15:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360501_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 16:28:01 2012] Source 25 is offset by -1.511239 and -7.835440 pixels which is larger than
2 X fitted extent = 2.219298 x 4.998068, not incorporating fit results
[Sun May 20 16:28:01 2012] Warning, spatial fit 24 centroid is now closest to src. 27
[Sun May 20 16:28:01 2012] Vigneting correction estimate = 1.000000
[Sun May 20 16:28:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 16:28:01 2012] Assessing source extent using major
[Sun May 20 16:28:01 2012] Source does appear to be extended
[Sun May 20 16:28:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 16:28:18 2012] XMMSAS src. selection expression = ellipse(25741.334167, 22938.504700, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 20 16:28:18 2012] Writing source region out to fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25_src.reg
[Sun May 20 16:28:18 2012] Extracting stamp from image fullrun_pn_xmm0111360501_pi300-10000_cl_sm2.00.img.gz, (259, 227) - (334, 302)
[Sun May 20 16:28:18 2012] XMMSAS bgd. selection expression = annulus(25741.334167, 22938.504700, 1087.500000, 2175.000000, X, Y) && !ellipse(25883.846000, 24518.279200, 1097.376032, 1097.376032, 0.000000, X, Y) && !ellipse(24829.188232, 25089.102325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23659.305055, 24969.560520, 1330.386278, 747.633894, 2.048475, X, Y) && !ellipse(23920.857574, 24312.729279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.855408, 23947.845947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26546.447906, 22973.803314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23378.551910, 22801.069763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.026886, 22789.623932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.997345, 22813.147491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25168.564697, 22880.898529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22457.676000, 25587.236000, 1228.064035, 1228.064035, 0.000000, X, Y) && !ellipse(23690.562988, 22145.630646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.090982, 21382.567800, 276.392808, 276.392808, 0.000000, X, Y)
[Sun May 20 16:28:18 2012] Writing fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25.gif
[Sun May 20 17:01:55 2012] Mean detx,y = (-600.55, -1457.62) 
[Sun May 20 17:02:00 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 17:02:43 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 17:02:44 2012] Setting source spectrum file to fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May 20 17:02:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun May 20 22:04:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 22:04:03 2012] rmf not generated due to insufficient counts
[Sun May 20 22:50:16 2012] Updating aperture counts using extracted products
[Sun May 20 22:50:16 2012] Error reading totcts from fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May 20 22:50:18 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 22:50:18 2012] Using photon index=1.80, rate=0.0628, arf fullrun_pn_xmm0111360501_pi300-10000_pass1_cl_src25.arf
[Sun May 20 22:50:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 22:50:18 2012] Updating source flux to 1.9e-13
[Sun May 20 22:50:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting