[Thu May 23 13:40:43 2013] Detection parameters:
  Position = (346.3, 345.9) = 17 2 29.42 -48 45 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 318.0 +/- 28.9
  Background counts = 149.5
  Rate = 0.08 +/- 0.007

[Thu May 23 13:40:50 2013] Off-axis axis estimate = 4.88'
[Thu May 23 13:45:44 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu May 23 13:45:44 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Thu May 23 13:45:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Thu May 23 13:45:44 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.87"
[Thu May 23 22:04:14 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43.ximg exists
[Thu May 23 22:04:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43.csv
[Thu May 23 22:04:14 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu May 23 22:04:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43.csv
[Thu May 23 22:04:14 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 23 22:04:17 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu May 23 22:04:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu May 23 22:04:17 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu May 23 22:04:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu May 23 22:04:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:04 2013] Spatial fit model total counts = 2057.010000, observed total counts = 1678.000000
[Fri May 24 14:02:04 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 14:02:04 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:04 2013] Assessing source extent using major
[Fri May 24 14:02:04 2013] Source does appear to be extended
[Fri May 24 14:02:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:04 2013] Source is confused with source 44
[Fri May 24 14:03:20 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Fri May 24 14:03:20 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Fri May 24 14:03:20 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Fri May 24 14:03:20 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.87"
[Fri May 24 23:51:49 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42.ximg exists
[Fri May 24 23:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42.csv
[Fri May 24 23:51:50 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri May 24 23:51:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42.csv
[Fri May 24 23:51:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 23:52:12 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri May 24 23:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri May 24 23:52:12 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri May 24 23:52:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri May 24 23:52:12 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:05 2013] Spatial fit model total counts = 2063.640000, observed total counts = 1678.000000
[Sat May 25 17:23:05 2013] Poor agreement between spatial fit and data for source 45
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:06 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:06 2013] Assessing source extent using major
[Sat May 25 17:23:06 2013] Source does appear to be extended
[Sat May 25 17:23:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 25 17:24:28 2013] XMMSAS src. selection expression = ellipse(30076.402283, 30042.086029, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 25 17:24:28 2013] Writing source region out to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_src.reg
[Sat May 25 17:24:28 2013] Extracting stamp from image fullrun_pn_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (309, 308) - (384, 383)
[Sat May 25 17:24:28 2013] XMMSAS bgd. selection expression = annulus(30076.402283, 30042.086029, 1087.500000, 2175.000000, X, Y) && !ellipse(25608.099360, 27790.010400, 3464.520100, 1911.897655, 79.822900, X, Y) && !ellipse(27439.480286, 29275.377289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.688843, 28685.103210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.398000, 28439.054000, 1246.000036, 333.997610, 351.697290, X, Y) && !ellipse(27619.608200, 27962.326000, 1174.016034, 1174.016034, 0.000000, X, Y) && !ellipse(27480.088959, 27435.914581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.132000, 27049.160000, 1174.016034, 750.120822, 333.964800, X, Y) && !ellipse(27324.590000, 30584.870000, 2990.080086, 1360.528039, 112.193100, X, Y) && !ellipse(27891.178000, 32004.314000, 1495.040043, 1495.040043, 0.000000, X, Y) && !ellipse(28985.140106, 30311.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29134.912964, 29520.335602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29915.380066, 30670.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28312.908000, 32759.422000, 2916.368084, 2916.368084, 0.000000, X, Y) && !ellipse(25664.820000, 32905.004000, 3095.920089, 3095.920089, 0.000000, X, Y) && !ellipse(28034.654000, 32446.926000, 1528.264044, 1528.264044, 0.000000, X, Y) && !ellipse(27888.892000, 32033.932000, 1495.040043, 1495.040043, 0.000000, X, Y) && !ellipse(30676.214000, 32528.848000, 1518.168044, 1518.168044, 0.000000, X, Y) && !ellipse(29145.746000, 31146.584000, 3036.336087, 1123.664032, 135.256000, X, Y) && !ellipse(31255.152985, 30820.429108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31813.319794, 30914.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.776703, 30561.563751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31535.786000, 29954.469000, 1481.264043, 1099.784032, 341.238800, X, Y) && !ellipse(31074.346000, 30005.250000, 1444.600042, 1444.600042, 0.000000, X, Y) && !ellipse(31875.832000, 29954.664000, 1531.536044, 953.640027, 359.554441, X, Y) && !ellipse(29501.166600, 27866.694120, 1296.680037, 478.860814, 84.690030, X, Y) && !ellipse(30021.339630, 27323.859070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.600000, 26916.996000, 1317.952038, 1317.952038, 0.000000, X, Y)
[Sat May 25 17:24:28 2013] Writing fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45.gif
[Sat May 25 19:28:00 2013] Mean detx,y = (3860.23, -1845.61) 
[Sat May 25 19:28:02 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 19:28:20 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 19:28:21 2013] Setting source spectrum file to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat May 25 19:28:21 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun May 26 01:18:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 01:18:09 2013] rmf not generated due to insufficient counts
[Sun May 26 16:38:12 2013] Updating aperture counts using extracted products
[Sun May 26 16:38:13 2013] Total counts from fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 1286.00
[Sun May 26 16:38:13 2013] Total counts from fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_bgd.pi.gz = 606.00
[Sun May 26 16:38:13 2013] Got source and background scale factors 1174316.000000, 767039.000000
[Sun May 26 16:38:13 2013] User source parameters:
  Position = (346.3, 345.9) = 17 2 29.42 -48 45 42.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 358.2 +/- 36.9
  Background aperture counts = 927.8
  Rate = 0.1 +/- 0.01

[Sun May 26 16:38:13 2013] Updating counts from extracted products
[Sun May 26 16:38:13 2013] Set source signif. to 358.23/30.46 = 11.76
[Sun May 26 16:38:46 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:38:46 2013] Using photon index=1.80, rate=0.141, arf fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45.arf
[Sun May 26 16:38:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:38:46 2013] Updating source flux to 7.2e-13
[Sun May 26 16:41:56 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:42:33 2013] xmm0111360201/analysis//spectral/fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete