[Thu May 23 13:40:41 2013] Detection parameters:
  Position = (301.9, 332.3) = 17 2 48.95 -48 46 39.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14563.7 +/- 154.8
  Background counts = 332.4
  Rate = 4 +/- 0.04

[Thu May 23 13:40:50 2013] Off-axis axis estimate = 2.47'
[Thu May 23 13:45:44 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Thu May 23 13:45:44 2013] Initial guess for spatial extent in simple fitting = 7.66"
[Thu May 23 13:45:44 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.978
[Thu May 23 13:45:44 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.66"
[Thu May 23 22:04:13 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src2.ximg exists
[Thu May 23 22:04:13 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu May 23 22:04:13 2013] Fit fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_src2 appears to have run properly
[Thu May 23 22:04:16 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu May 23 22:04:16 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu May 23 22:04:16 2013] Fit fullrun_pn_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri May 24 14:02:03 2013] Spatial fit model total counts = 33134.400000, observed total counts = 33186.000000
[Fri May 24 14:02:03 2013] Offset between fit and detection position for source 2 = 1.357046 pixels
[Fri May 24 14:02:03 2013] 33523.990000 total counts/ 25600.000000 bgd. counts: snr = 49.524938
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.357046 pixels
  Position = (300.6, 332.8) = 17 2 49.51 -48 46 39.3
  Extent = 15.3 (15.3-30.6)" x 6.9 (6.7-7.2)", rotation angle = 347 (346-348) degrees
  Source counts = 7924.0 +/- 183.1
  Background counts = 25600.0
  Rate = 3 +/- 0.07
[Fri May 24 14:02:04 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:04 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:04 2013] Source does appear to be extended
[Fri May 24 14:02:04 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.11
[Fri May 24 14:02:04 2013] Source is asymmetric
[Fri May 24 14:02:04 2013] Source is confused with source 4
[Fri May 24 14:03:20 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 14:03:20 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 14:03:20 2013] Initial guess for spatial extent in simple fitting = 11.14"
[Fri May 24 14:03:20 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.961
[Fri May 24 14:03:20 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 11.14"
[Fri May 24 23:51:34 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src2.ximg exists
[Fri May 24 23:51:34 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri May 24 23:51:34 2013] Fit fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri May 24 23:52:05 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri May 24 23:52:05 2013] fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri May 24 23:52:05 2013] Fit fullrun_pn_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat May 25 17:23:05 2013] Warning, spatial fit 2 centroid is now closest to src. 4
[Sat May 25 17:23:06 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:06 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:06 2013] Source does appear to be extended
[Sat May 25 17:23:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.11
[Sat May 25 17:23:06 2013] Source is asymmetric
[Sat May 25 17:24:22 2013] Counts = 7923.990000, rescaling region sizes by 2.000000
[Sat May 25 17:24:22 2013] XMMSAS src. selection expression = ellipse(26103.044800, 28901.968000, 1838.676053, 833.936424, 347.131700, X, Y)
[Sat May 25 17:24:22 2013] Writing source region out to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_src.reg
[Sat May 25 17:24:22 2013] Extracting stamp from image fullrun_pn_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (195, 227) - (406, 438)
[Sat May 25 17:24:23 2013] XMMSAS bgd. selection expression = annulus(26103.044800, 28901.968000, 6128.920176, 12257.840353, X, Y) && !ellipse(25608.099360, 27790.010400, 3464.520100, 1911.897655, 79.822900, X, Y) && !ellipse(24850.245270, 28604.000031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26467.176697, 28416.475311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24069.831268, 27781.888794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24110.681200, 27276.718000, 1203.560035, 616.206418, 83.737800, X, Y) && !ellipse(27439.480286, 29275.377289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23388.914490, 28989.911194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27637.688843, 28685.103210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27160.398000, 28439.054000, 1246.000036, 333.997610, 351.697290, X, Y) && !ellipse(22778.547150, 28209.608704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25171.336000, 28050.820000, 1221.360035, 307.210409, 7.867000, X, Y) && !ellipse(27619.608200, 27962.326000, 1174.016034, 1174.016034, 0.000000, X, Y) && !ellipse(21816.930400, 27509.632000, 1634.648047, 385.997611, 353.937090, X, Y) && !ellipse(20818.762960, 27355.857200, 1379.744040, 327.599209, 170.692300, X, Y) && !ellipse(19945.707886, 27191.723572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.088959, 27435.914581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26917.132000, 27049.160000, 1174.016034, 750.120822, 333.964800, X, Y) && !ellipse(26791.144400, 26135.284000, 1094.360031, 347.350410, 73.438097, X, Y) && !ellipse(24537.927600, 25063.706000, 1139.584033, 488.509614, 76.113300, X, Y) && !ellipse(24348.963000, 26188.045800, 1133.008033, 509.405615, 81.802370, X, Y) && !ellipse(24574.971240, 24889.160400, 1636.728047, 488.165614, 81.316350, X, Y) && !ellipse(27324.590000, 30584.870000, 2990.080086, 1360.528039, 112.193100, X, Y) && !ellipse(27891.178000, 32004.314000, 1495.040043, 1495.040043, 0.000000, X, Y) && !ellipse(24010.770142, 30713.896057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28985.140106, 30311.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29134.912964, 29520.335602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23264.467957, 28474.856750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21508.878952, 27451.093384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22467.159660, 27344.160200, 1256.592036, 817.896024, 90.000000, X, Y) && !ellipse(20611.936000, 26900.928000, 1403.200040, 942.248027, 31.095100, X, Y) && !ellipse(19584.710000, 26934.890800, 1136.680033, 1136.680033, 0.000000, X, Y) && !ellipse(22769.055420, 27087.046387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22852.846000, 24540.941140, 2469.616071, 1251.376036, 78.105200, X, Y) && !ellipse(24827.175400, 23616.228000, 1209.880035, 402.708012, 86.889800, X, Y) && !ellipse(24204.502000, 23084.008000, 1910.688055, 1426.112041, 77.736400, X, Y) && !ellipse(28402.584198, 16042.845352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28580.354800, 14996.124120, 1783.480051, 579.536017, 80.847960, X, Y) && !ellipse(25449.474762, 31171.875336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29915.380066, 30670.972198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30076.402283, 30042.086029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21779.170000, 28097.578000, 1339.672039, 294.973608, 351.607100, X, Y) && !ellipse(21807.616000, 26480.058000, 1279.920037, 1279.920037, 0.000000, X, Y) && !ellipse(22249.684000, 26308.566000, 1241.544036, 1241.544036, 0.000000, X, Y) && !ellipse(23180.327423, 24311.144226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.909600, 22310.190800, 1293.736037, 388.814411, 87.003540, X, Y) && !ellipse(23310.737152, 23517.874573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24992.801758, 22046.566193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.481232, 20916.735733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25169.008200, 21119.819600, 1349.792039, 980.312028, 68.889400, X, Y) && !ellipse(28221.704420, 17195.214000, 1654.608048, 557.255216, 80.151660, X, Y) && !ellipse(28294.896210, 16831.383743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28519.668600, 15439.174000, 1741.896050, 602.090417, 74.751500, X, Y) && !ellipse(23976.424800, 42835.948000, 2157.136062, 887.888026, 70.338478, X, Y) && !ellipse(23579.550000, 38660.993600, 1897.496055, 1897.496055, 0.000000, X, Y) && !ellipse(24423.736053, 36410.516296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25014.854000, 34352.390000, 1547.960045, 1547.960045, 0.000000, X, Y) && !ellipse(28312.908000, 32759.422000, 2916.368084, 2916.368084, 0.000000, X, Y) && !ellipse(25664.820000, 32905.004000, 3095.920089, 3095.920089, 0.000000, X, Y) && !ellipse(26355.134460, 32728.665039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28034.654000, 32446.926000, 1528.264044, 1528.264044, 0.000000, X, Y) && !ellipse(27888.892000, 32033.932000, 1495.040043, 1495.040043, 0.000000, X, Y) && !ellipse(30676.214000, 32528.848000, 1518.168044, 1518.168044, 0.000000, X, Y) && !ellipse(26803.991058, 32137.745789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29145.746000, 31146.584000, 3036.336087, 1123.664032, 135.256000, X, Y) && !ellipse(31255.152985, 30820.429108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31813.319794, 30914.103851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.776703, 30561.563751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31535.786000, 29954.469000, 1481.264043, 1099.784032, 341.238800, X, Y) && !ellipse(31074.346000, 30005.250000, 1444.600042, 1444.600042, 0.000000, X, Y) && !ellipse(31875.832000, 29954.664000, 1531.536044, 953.640027, 359.554441, X, Y) && !ellipse(29501.166600, 27866.694120, 1296.680037, 478.860814, 84.690030, X, Y) && !ellipse(30021.339630, 27323.859070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29307.600000, 26916.996000, 1317.952038, 1317.952038, 0.000000, X, Y) && !ellipse(20187.622000, 26909.122000, 1435.552041, 1435.552041, 0.000000, X, Y) && !ellipse(19783.512146, 26648.950623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19047.998672, 26461.449799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29525.198000, 26545.301600, 1308.256038, 839.856024, 77.974300, X, Y) && !ellipse(21261.844406, 26149.645813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19811.302000, 25588.548000, 1419.752041, 970.792028, 97.569730, X, Y) && !ellipse(26955.000200, 25435.788000, 1126.304032, 663.663219, 74.955500, X, Y) && !ellipse(21287.259674, 25360.053375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21030.064331, 24487.985107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21976.381821, 24302.661407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21378.066986, 24129.704834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27077.834360, 24201.038000, 1186.072034, 479.410414, 74.120800, X, Y) && !ellipse(27191.225800, 23655.814000, 1221.616035, 597.864817, 77.361800, X, Y) && !ellipse(21290.786880, 22837.313568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22510.832581, 22582.255524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22274.519043, 23273.638428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27353.181213, 22223.330078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20916.732000, 21707.974000, 1425.040041, 1425.040041, 0.000000, X, Y) && !ellipse(23476.899506, 22388.857880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22419.319031, 22057.773071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27497.744904, 21523.230713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23641.707794, 21607.993851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.635956, 21088.359482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24127.997650, 21016.227646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22569.460938, 20945.261368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23095.708984, 21005.920822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27629.540558, 20568.433060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24760.274292, 20488.016205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25270.693054, 20393.843643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24364.414734, 19722.462402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24034.131744, 19806.148926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.443176, 19789.443481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.960000, 20224.222000, 1033.250397, 1033.250397, 0.000000, X, Y) && !ellipse(25351.469666, 19520.305817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24897.472931, 19532.031754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23593.670349, 19188.729828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25446.463959, 19097.156540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24935.731903, 18910.507980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27986.211884, 18397.885544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28086.144531, 17966.309204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25833.992035, 17880.944702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25136.900818, 18485.095291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25017.828064, 17391.397125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.701233, 17337.753586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25962.227295, 16746.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25516.251404, 16386.895996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25640.875824, 15866.179703, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May 25 17:24:23 2013] Writing fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2.gif
[Sat May 25 17:38:21 2013] Mean detx,y = (-360.59, -1454.39) 
[Sat May 25 17:38:25 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May 25 17:43:22 2013] Binned source spectrum to 10 counts/bin
[Sat May 25 17:43:22 2013] Setting source spectrum file to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat May 25 17:43:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun May 26 16:37:56 2013] Updating aperture counts using extracted products
[Sun May 26 16:37:56 2013] Total counts from fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 54216.00
[Sun May 26 16:37:56 2013] Total counts from fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 83403.00
[Sun May 26 16:37:56 2013] Got source and background scale factors 3714903.000000, 250475470.000000
[Sun May 26 16:37:56 2013] User source parameters:
  Position = (300.6, 332.8) = 17 2 49.51 -48 46 39.3
  Extent = 15.3 (15.3-30.6)" x 6.9 (6.7-7.2)", rotation angle = 347 (346-348) degrees
  Source aperture counts = 52979.0 +/- 233.8
  Background aperture counts = 1237.0
  Rate = 2e+01 +/- 0.09

[Sun May 26 16:38:44 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:38:44 2013] Using photon index=1.80, rate=3.12, arf fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2.arf
[Sun May 26 16:38:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:38:44 2013] Updating source flux to 1.8e-11
[Sun May 26 16:41:56 2013] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun May 26 16:42:33 2013] xmm0111360201/analysis//spectral/fullrun_pn_xmm0111360201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete