[Thu May 23 13:41:01 2013] Detection parameters:
  Position = (212.4, 349.9) = 17 3 28.29 -48 45 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.2 +/- 28.5
  Background counts = 324.7
  Rate = 0.02 +/- 0.005

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 7.27'
[Fri May 24 05:50:12 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May 24 05:50:12 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.948
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 10.06"
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src73.ximg exists
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri May 24 14:01:33 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src73 appears to have run properly
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri May 24 14:01:36 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri May 24 14:02:49 2013] Spatial fit model total counts = 3842.210000, observed total counts = 3845.000000
[Fri May 24 14:02:49 2013] Offset between fit and detection position for source 90 = 3.945232 pixels
[Fri May 24 14:02:49 2013] 3764.159000 total counts/ 2772.790000 bgd. counts: snr = 18.826815
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 3.945232 pixels
  Position = (215.7, 347.7) = 17 3 26.87 -48 45 34.1
  Extent = 20.1 (20.0-40.2)", rotation angle = 0
  Source counts = 991.4 +/- 61.4
  Background counts = 2772.8
  Rate = 0.1 +/- 0.006
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 92
[Sat May 25 09:00:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 20.12"
[Sat May 25 09:00:48 2013] source mask rpix=4.6, npix_max = 105, mask sum = 100, frac = 0.951
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 20.12"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src71.ximg exists
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src71_1.ximg exists
[Sat May 25 17:22:35 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src71 appears to have run properly
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sat May 25 17:22:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning, spatial fit 71 centroid is now closest to src. 89
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 3643.620000, observed total counts = 2610.000000
[Sat May 25 17:23:52 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 6599.350000, observed total counts = 6600.000000
[Sat May 25 17:23:52 2013] Offset between fit and detection position for source 90 = 3.460880 pixels
[Sat May 25 17:23:52 2013] Warning, changing simple spatial fit ID from 71 to 90
[Sat May 25 17:23:52 2013] 6292.298000 total counts/ 6078.680000 bgd. counts: snr = 2.739890
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 3.460880 pixels
  Position = (212.6, 346.1) = 17 3 28.23 -48 45 41.0
  Extent = 30.0 (20.4-60.1)", rotation angle = 12 (7-18) degrees
  Source counts = 213.6 +/- 79.3
  Background counts = 6078.7
  Rate = 0.02 +/- 0.008
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.96
[Sat May 25 17:23:52 2013] Source is asymmetric
[Sun May 26 09:47:07 2013] XMMSAS src. selection expression = ellipse(18446.520000, 30059.844000, 1801.716052, 225.214806, 11.944100, X, Y)
[Sun May 26 09:47:07 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_src.reg
[Sun May 26 09:47:07 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (109, 243) - (316, 450)
[Sun May 26 09:47:08 2013] XMMSAS bgd. selection expression = annulus(18446.520000, 30059.844000, 3002.860086, 6005.720173, X, Y) && !ellipse(25034.480408, 34478.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.422000, 36942.842000, 1102.832032, 226.028007, 355.862460, X, Y) && !ellipse(24798.870000, 35037.407200, 1455.840042, 498.974414, 0.524374, X, Y) && !ellipse(24798.241400, 35946.744400, 1684.696048, 882.936025, 77.846000, X, Y) && !ellipse(24517.937000, 37859.544000, 1808.224052, 821.856024, 80.499000, X, Y) && !ellipse(23784.025330, 34289.031067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.527985, 29284.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19666.016000, 27190.432000, 1496.832043, 550.140816, 10.475600, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(19528.212494, 29167.776917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19278.357000, 25896.200620, 1471.264042, 640.131218, 90.462239, X, Y) && !ellipse(19743.990707, 28211.661041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22087.088577, 33887.893311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.289600, 25539.581400, 2094.696060, 686.689620, 72.263200, X, Y) && !ellipse(24254.586000, 35857.336000, 1671.944048, 1671.944048, 0.000000, X, Y) && !ellipse(18681.311249, 30960.699615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18741.158264, 26307.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.988632, 25443.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26151.802000, 34917.628000, 2549.792073, 1382.800040, 339.590100, X, Y) && !ellipse(22350.978577, 34728.868530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.733749, 23441.282288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19482.998672, 29911.524963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.399600, 29234.073600, 1598.608046, 803.680023, 191.538000, X, Y) && !ellipse(20233.637848, 23874.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20114.384552, 25009.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19556.714233, 30475.800995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22666.807587, 34589.275055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21677.097626, 33703.663483, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:08 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90.gif
[Sun May 26 11:42:36 2013] Mean detx,y = (7837.10, 3562.68) 
[Sun May 26 11:42:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:43:22 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:43:22 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Sun May 26 11:43:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Sun May 26 16:39:52 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:52 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 2014.00
[Sun May 26 16:39:53 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_bgd.pi.gz = 43492.00
[Sun May 26 16:39:53 2013] Got source and background scale factors 1118288.000000, 46655172.000000
[Sun May 26 16:39:53 2013] User source parameters:
  Position = (212.6, 346.1) = 17 3 28.23 -48 45 41.0
  Extent = 30.0 (20.4-60.1)", rotation angle = 12 (7-18) degrees
  Source aperture counts = 971.5 +/- 45.9
  Background aperture counts = 1042.5
  Rate = 0.09 +/- 0.004

[Sun May 26 16:40:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:12 2013] Using photon index=1.80, rate=0.0208, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90.arf
[Sun May 26 16:40:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:12 2013] Updating source flux to 4.6e-13
[Sun May 26 16:41:17 2013] Flag p found in src. 90 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] Flag c found in src. 90 procflags, skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete