[Thu May 23 13:41:00 2013] Detection parameters:
  Position = (326.6, 244.3) = 17 2 38.02 -48 53 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.6 +/- 30.4
  Background counts = 97.5
  Rate = 0.04 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 4.42'
[Fri May 24 05:50:12 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Fri May 24 05:50:12 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.809
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 44 for pass 0, mean size = 8.64"
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44.csv
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44_1.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44.csv
[Fri May 24 14:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44.csv
[Fri May 24 14:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:48 2013] Warning, spatial fit 44 centroid is now closest to src. 70
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 67
[Sat May 25 09:00:48 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Sat May 25 09:00:48 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.809
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 8.64"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43.csv
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43_1.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43.csv
[Sat May 25 17:22:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43.csv
[Sat May 25 17:22:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Source 61 is offset by 4.676771 and -5.620516 pixels which is larger than
2 X fitted extent = 1.556869 x 1.556869, not incorporating fit results
[Sat May 25 17:23:52 2013] Warning, spatial fit 43 centroid is now closest to src. 70
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:05 2013] XMMSAS src. selection expression = ellipse(28368.459106, 21208.595139, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:05 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_src.reg
[Sun May 26 09:47:05 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (289, 207) - (364, 282)
[Sun May 26 09:47:05 2013] XMMSAS bgd. selection expression = annulus(28368.459106, 21208.595139, 1087.500000, 2175.000000, X, Y) && !ellipse(27625.396600, 20668.033340, 551.796816, 551.796816, 0.000000, X, Y) && !ellipse(29301.588400, 20873.724200, 2501.584072, 947.248027, 350.624530, X, Y) && !ellipse(27032.048200, 20648.934000, 1364.056039, 450.891213, 352.246000, X, Y) && !ellipse(29770.815600, 21014.557400, 1976.968057, 552.518416, 351.042710, X, Y) && !ellipse(27523.503998, 20134.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.179800, 18520.031600, 3147.792091, 1046.984030, 76.690200, X, Y) && !ellipse(29476.806600, 20862.883200, 1443.400042, 1058.184030, 159.138000, X, Y) && !ellipse(30255.978000, 20338.064000, 1334.720038, 1334.720038, 0.000000, X, Y) && !ellipse(25865.979828, 20801.341522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(27677.606600, 18603.950000, 1573.896045, 1573.896045, 0.000000, X, Y) && !ellipse(26271.688000, 20500.113620, 1398.112040, 452.268813, 351.239900, X, Y) && !ellipse(24968.392400, 20237.520600, 1404.496040, 692.487220, 348.465800, X, Y) && !ellipse(28989.499664, 20061.495041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.186280, 20425.296600, 1394.232040, 522.744015, 342.609000, X, Y) && !ellipse(29917.670000, 20537.460000, 1533.960044, 1533.960044, 0.000000, X, Y) && !ellipse(28475.109800, 19788.738000, 1461.728042, 416.301612, 84.776760, X, Y) && !ellipse(27574.469940, 21100.328354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29692.765000, 19157.626000, 1532.328044, 760.439222, 2.778110, X, Y) && !ellipse(29591.822266, 21400.428970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28694.900200, 20778.366000, 1420.488041, 1420.488041, 0.000000, X, Y) && !ellipse(28084.727200, 16704.143600, 2519.904073, 796.188023, 82.728630, X, Y) && !ellipse(31801.258600, 20141.744000, 1553.512045, 1553.512045, 0.000000, X, Y) && !ellipse(30973.058777, 20780.986740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.643402, 20981.951218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31195.062400, 21295.358000, 1509.048043, 1509.048043, 0.000000, X, Y) && !ellipse(29870.669373, 21459.671967, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:05 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61.gif
[Sun May 26 11:26:48 2013] Mean detx,y = (-858.75, -7118.26) 
[Sun May 26 11:26:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:27:06 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:27:06 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun May 26 11:27:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun May 26 14:38:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 14:38:32 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:45 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:45 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 2100.00
[Sun May 26 16:39:45 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_bgd.pi.gz = 0.00
[Sun May 26 16:39:45 2013] Got source and background scale factors 398130.000000, 2262.000000
[Sun May 26 16:39:46 2013] User source parameters:
  Position = (326.6, 244.3) = 17 2 38.02 -48 53 8.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2100.0 +/- 46.8
  Background aperture counts = 0.0
  Rate = 0.2 +/- 0.005

[Sun May 26 16:39:46 2013] Updating counts from extracted products
[Sun May 26 16:40:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:10 2013] Using photon index=1.80, rate=0.204, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61.arf
[Sun May 26 16:40:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:10 2013] Updating source flux to 2.3e-11
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete