[Thu May 23 13:41:00 2013] Detection parameters:
  Position = (332.5, 245.1) = 17 2 35.43 -48 53 0.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 282.5 +/- 27.5
  Background counts = 93.1
  Rate = 0.03 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 4.59'
[Fri May 24 05:50:12 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Fri May 24 05:50:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.757
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 8.72"
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68.csv
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68_1.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68.csv
[Fri May 24 14:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Fri May 24 14:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Fri May 24 14:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68.csv
[Fri May 24 14:01:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Spatial fit model total counts = 4300.720000, observed total counts = 4271.000000
[Fri May 24 14:02:49 2013] Offset between fit and detection position for source 60 = 6.120679 pixels
[Fri May 24 14:02:49 2013] Warning, changing simple spatial fit ID from 68 to 60
[Fri May 24 14:02:49 2013] 4165.746000 total counts/ 3864.140000 bgd. counts: snr = 4.851919
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 6.120679 pixels
  Position = (330.4, 239.4) = 17 2 36.37 -48 53 25.4
  Extent = 17.8 (16.8-18.3)", rotation angle = 0
  Source counts = 301.6 +/- 64.5
  Background counts = 3864.1
  Rate = 0.03 +/- 0.006
[Fri May 24 14:02:49 2013] Spatial fit model total counts = 5791.240000, observed total counts = 3008.000000
[Fri May 24 14:02:49 2013] Poor agreement between spatial fit and data for source 60
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 67
[Sat May 25 09:00:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 17.76"
[Sat May 25 09:00:48 2013] source mask rpix=4.1, npix_max = 83, mask sum = 69, frac = 0.822
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 17.76"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src66.ximg exists
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src66_1.ximg exists
[Sat May 25 17:22:35 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src66 appears to have run properly
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Sat May 25 17:22:38 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src66 appears to have run properly
[Sat May 25 17:23:52 2013] Source 60 is offset by -2.456239 and 1.395356 pixels which is larger than
2 X fitted extent = 1.055582 x 1.055582, not incorporating fit results
[Sat May 25 17:23:52 2013] Source 60 is offset by -1.944802 and -2.306253 pixels which is larger than
2 X fitted extent = 1.598400 x 1.598400, not incorporating fit results
[Sat May 25 17:23:52 2013] Warning, spatial fit 66 centroid is now closest to src. 72
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:07 2013] XMMSAS src. selection expression = ellipse(28694.900200, 20778.366000, 1065.366031, 1065.366031, 0.000000, X, Y)
[Sun May 26 09:47:07 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_src.reg
[Sun May 26 09:47:07 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (269, 178) - (392, 301)
[Sun May 26 09:47:07 2013] XMMSAS bgd. selection expression = annulus(28694.900200, 20778.366000, 1775.610051, 3551.220102, X, Y) && !ellipse(27625.396600, 20668.033340, 551.796816, 551.796816, 0.000000, X, Y) && !ellipse(29301.588400, 20873.724200, 2501.584072, 947.248027, 350.624530, X, Y) && !ellipse(27032.048200, 20648.934000, 1364.056039, 450.891213, 352.246000, X, Y) && !ellipse(29770.815600, 21014.557400, 1976.968057, 552.518416, 351.042710, X, Y) && !ellipse(27523.503998, 20134.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.179800, 18520.031600, 3147.792091, 1046.984030, 76.690200, X, Y) && !ellipse(34062.689400, 26196.226000, 2012.400058, 618.810418, 85.044740, X, Y) && !ellipse(29476.806600, 20862.883200, 1443.400042, 1058.184030, 159.138000, X, Y) && !ellipse(30255.978000, 20338.064000, 1334.720038, 1334.720038, 0.000000, X, Y) && !ellipse(25865.979828, 20801.341522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(32496.702000, 21462.710400, 1556.928045, 549.974416, 351.077410, X, Y) && !ellipse(27677.606600, 18603.950000, 1573.896045, 1573.896045, 0.000000, X, Y) && !ellipse(28368.459106, 21208.595139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.688000, 20500.113620, 1398.112040, 452.268813, 351.239900, X, Y) && !ellipse(24968.392400, 20237.520600, 1404.496040, 692.487220, 348.465800, X, Y) && !ellipse(28989.499664, 20061.495041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.186280, 20425.296600, 1394.232040, 522.744015, 342.609000, X, Y) && !ellipse(29917.670000, 20537.460000, 1533.960044, 1533.960044, 0.000000, X, Y) && !ellipse(28475.109800, 19788.738000, 1461.728042, 416.301612, 84.776760, X, Y) && !ellipse(33260.229800, 21519.444800, 1600.240046, 809.176023, 345.282300, X, Y) && !ellipse(27574.469940, 21100.328354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29692.765000, 19157.626000, 1532.328044, 760.439222, 2.778110, X, Y) && !ellipse(29591.822266, 21400.428970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28084.727200, 16704.143600, 2519.904073, 796.188023, 82.728630, X, Y) && !ellipse(31801.258600, 20141.744000, 1553.512045, 1553.512045, 0.000000, X, Y) && !ellipse(31940.033722, 20845.356598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30973.058777, 20780.986740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.643402, 20981.951218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31195.062400, 21295.358000, 1509.048043, 1509.048043, 0.000000, X, Y) && !ellipse(32803.263397, 20923.537918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.669373, 21459.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32353.445679, 21854.314194, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:07 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60.gif
[Sun May 26 11:38:57 2013] Mean detx,y = (-1011.98, -7436.98) 
[Sun May 26 11:38:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:39:43 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:39:44 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun May 26 11:39:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sun May 26 16:39:51 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:51 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 7693.00
[Sun May 26 16:39:51 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_bgd.pi.gz = 3944.00
[Sun May 26 16:39:52 2013] Got source and background scale factors 2140955.000000, 2674537.000000
[Sun May 26 16:39:52 2013] User source parameters:
  Position = (330.4, 239.4) = 17 2 36.37 -48 53 25.4
  Extent = 17.8 (16.8-18.3)", rotation angle = 0
  Source aperture counts = 4535.8 +/- 88.7
  Background aperture counts = 3157.2
  Rate = 0.4 +/- 0.009

[Sun May 26 16:40:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:11 2013] Using photon index=1.80, rate=0.0293, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60.arf
[Sun May 26 16:40:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:11 2013] Updating source flux to 4.9e-13
[Sun May 26 16:41:17 2013] Flag b found in src. 60 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] Flag p found in src. 60 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete