[Thu May 23 13:40:59 2013] Detection parameters:
  Position = (387.8, 250.1) = 17 2 11.07 -48 52 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.1 +/- 21.0
  Background counts = 259.0
  Rate = 0.02 +/- 0.002

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 7.36'
[Fri May 24 05:50:12 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Fri May 24 05:50:12 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.878
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 10.11"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Source 56 is offset by 4.725021 and -8.225303 pixels which is larger than
2 X fitted extent = 1.260828 x 1.260828, not incorporating fit results
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 108
[Fri May 24 14:02:49 2013] Source is confused with source 111
[Sat May 25 09:00:48 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Sat May 25 09:00:48 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.878
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 93 for pass 1, mean size = 10.11"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93.csv
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93_1.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93.csv
[Sat May 25 17:22:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93.csv
[Sat May 25 17:22:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning: source 93 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 11.077983 pixels away
[Sat May 25 17:23:52 2013] Source 56 is offset by 1.593021 and -1.086590 pixels which is larger than
2 X fitted extent = 1.146317 x 1.146317, not incorporating fit results
[Sat May 25 17:23:52 2013] Warning: source 98 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 11.221116 pixels away
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:10 2013] XMMSAS src. selection expression = ellipse(33686.928833, 21708.802658, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_src.reg
[Sun May 26 09:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (350, 213) - (425, 288)
[Sun May 26 09:47:11 2013] XMMSAS bgd. selection expression = annulus(33686.928833, 21708.802658, 1087.500000, 2175.000000, X, Y) && !ellipse(29301.588400, 20873.724200, 2501.584072, 947.248027, 350.624530, X, Y) && !ellipse(29770.815600, 21014.557400, 1976.968057, 552.518416, 351.042710, X, Y) && !ellipse(30255.978000, 20338.064000, 1334.720038, 1334.720038, 0.000000, X, Y) && !ellipse(34021.658997, 24405.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(32496.702000, 21462.710400, 1556.928045, 549.974416, 351.077410, X, Y) && !ellipse(34234.358704, 23975.604279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33260.229800, 21519.444800, 1600.240046, 809.176023, 345.282300, X, Y) && !ellipse(31801.258600, 20141.744000, 1553.512045, 1553.512045, 0.000000, X, Y) && !ellipse(31940.033722, 20845.356598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30973.058777, 20780.986740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.945862, 23183.391327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31195.062400, 21295.358000, 1509.048043, 1509.048043, 0.000000, X, Y) && !ellipse(32803.263397, 20923.537918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33835.201599, 21094.965195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.888000, 25349.957600, 1617.848047, 1531.656044, 17.116000, X, Y) && !ellipse(32353.445679, 21854.314194, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:11 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56.gif
[Sun May 26 12:14:55 2013] Mean detx,y = (-6041.21, -7285.07) 
[Sun May 26 12:14:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:15:20 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:15:20 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sun May 26 12:15:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun May 26 16:16:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 16:16:27 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:57 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1890.00
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_bgd.pi.gz = 4104.00
[Sun May 26 16:39:57 2013] Got source and background scale factors 892978.000000, 3470778.000000
[Sun May 26 16:39:57 2013] User source parameters:
  Position = (387.8, 250.1) = 17 2 11.07 -48 52 30.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 834.1 +/- 44.5
  Background aperture counts = 1055.9
  Rate = 0.08 +/- 0.004

[Sun May 26 16:39:57 2013] Updating counts from extracted products
[Sun May 26 16:39:57 2013] Set source signif. to 834.10/32.49 = 25.67
[Sun May 26 16:40:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:13 2013] Using photon index=1.80, rate=0.0811, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56.arf
[Sun May 26 16:40:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:13 2013] Updating source flux to 1.7e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete