[Thu May 23 13:40:59 2013] Detection parameters:
  Position = (391.6, 281.1) = 17 2 9.40 -48 50 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 497.7 +/- 160.7
  Background counts = 313.3
  Rate = 0.05 +/- 0.02

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 6.87'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Fri May 24 05:50:12 2013] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.718
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.86"
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31.ximg exists
[Fri May 24 14:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31.csv
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri May 24 14:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31.csv
[Fri May 24 14:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31.csv
[Fri May 24 14:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:48 2013] Warning, spatial fit 31 centroid is now closest to src. 51
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 104
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Sat May 25 09:00:48 2013] source mask rpix=2.3, npix_max = 30, mask sum = 22, frac = 0.718
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.86"
[Sat May 25 17:22:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src30.ximg exists
[Sat May 25 17:22:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat May 25 17:22:34 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src30 appears to have run properly
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat May 25 17:22:37 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat May 25 17:23:52 2013] Warning, spatial fit 30 centroid is now closest to src. 104
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:04 2013] XMMSAS src. selection expression = ellipse(34021.658997, 24405.496002, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:04 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_src.reg
[Sun May 26 09:47:04 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (354, 244) - (429, 319)
[Sun May 26 09:47:04 2013] XMMSAS bgd. selection expression = annulus(34021.658997, 24405.496002, 1087.500000, 2175.000000, X, Y) && !ellipse(34062.689400, 26196.226000, 2012.400058, 618.810418, 85.044740, X, Y) && !ellipse(33957.953400, 26566.317000, 1558.968045, 494.535214, 74.018300, X, Y) && !ellipse(33890.289800, 26914.746000, 1555.160045, 496.742414, 79.490400, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(32496.702000, 21462.710400, 1556.928045, 549.974416, 351.077410, X, Y) && !ellipse(34234.358704, 23975.604279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33260.229800, 21519.444800, 1600.240046, 809.176023, 345.282300, X, Y) && !ellipse(34452.982400, 26608.660400, 1604.320046, 933.864027, 165.686000, X, Y) && !ellipse(34313.945862, 23183.391327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33686.928833, 21708.802658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31195.062400, 21295.358000, 1509.048043, 1509.048043, 0.000000, X, Y) && !ellipse(34207.888000, 25349.957600, 1617.848047, 1531.656044, 17.116000, X, Y) && !ellipse(33099.318000, 27293.368000, 1547.320045, 441.092013, 81.769360, X, Y) && !ellipse(33609.324982, 25346.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32353.445679, 21854.314194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.579010, 25941.042816, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:04 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54.gif
[Sun May 26 11:18:20 2013] Mean detx,y = (-7050.02, -4592.52) 
[Sun May 26 11:18:22 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:18:40 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:18:41 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Sun May 26 11:18:41 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Sun May 26 14:07:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 14:07:23 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:40 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:40 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 1880.00
[Sun May 26 16:39:40 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_bgd.pi.gz = 2948.00
[Sun May 26 16:39:40 2013] Got source and background scale factors 557720.000000, 1881124.000000
[Sun May 26 16:39:40 2013] User source parameters:
  Position = (391.6, 281.1) = 17 2 9.40 -48 50 24.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1006.0 +/- 44.4
  Background aperture counts = 874.0
  Rate = 0.1 +/- 0.004

[Sun May 26 16:39:40 2013] Updating counts from extracted products
[Sun May 26 16:39:40 2013] Set source signif. to 1005.97/29.56 = 34.03
[Sun May 26 16:40:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:10 2013] Using photon index=1.80, rate=0.0978, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54.arf
[Sun May 26 16:40:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:10 2013] Updating source flux to 9e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete