[Thu May 23 13:40:59 2013] Detection parameters:
  Position = (227.3, 314.1) = 17 3 21.79 -48 48 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 403.5 +/- 33.3
  Background counts = 247.4
  Rate = 0.04 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 5.28'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Fri May 24 05:50:12 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 9.07"
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40.ximg exists
[Fri May 24 14:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40.csv
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri May 24 14:01:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40.csv
[Fri May 24 14:01:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri May 24 14:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:48 2013] Source 45 is offset by -6.565646 and 5.769716 pixels which is larger than
2 X fitted extent = 1.340391 x 1.340391, not incorporating fit results
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 97
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Sat May 25 09:00:48 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.122
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 9.07"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39.csv
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39.csv
[Sat May 25 17:22:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39.csv
[Sat May 25 17:22:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 5078.830000, observed total counts = 5081.000000
[Sat May 25 17:23:52 2013] Offset between fit and detection position for source 45 = 1.190944 pixels
[Sat May 25 17:23:52 2013] Warning, changing simple spatial fit ID from 39 to 34
[Sat May 25 17:23:52 2013] 4651.336000 total counts/ 4485.810000 bgd. counts: snr = 2.471416
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.190944 pixels
  Position = (226.6, 313.1) = 17 3 22.09 -48 48 4.6
  Extent = 18.7 (15.1-37.4)" x 6.9 (2.4-12.4)", rotation angle = 10 (338-40) degrees
  Source counts = 165.5 +/- 68.2
  Background counts = 4485.8
  Rate = 0.02 +/- 0.007
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Sun May 26 09:47:05 2013] XMMSAS src. selection expression = ellipse(19666.016000, 27190.432000, 1122.624032, 412.605612, 10.475600, X, Y)
[Sun May 26 09:47:05 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_src.reg
[Sun May 26 09:47:05 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (162, 249) - (291, 378)
[Sun May 26 09:47:05 2013] XMMSAS bgd. selection expression = annulus(19666.016000, 27190.432000, 1871.040054, 3742.080108, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.527985, 29284.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(19528.212494, 29167.776917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19278.357000, 25896.200620, 1471.264042, 640.131218, 90.462239, X, Y) && !ellipse(19743.990707, 28211.661041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.289600, 25539.581400, 2094.696060, 686.689620, 72.263200, X, Y) && !ellipse(18681.311249, 30960.699615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18446.520000, 30059.844000, 2402.288069, 300.286409, 11.944100, X, Y) && !ellipse(18741.158264, 26307.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.988632, 25443.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.733749, 23441.282288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19482.998672, 29911.524963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.399600, 29234.073600, 1598.608046, 803.680023, 191.538000, X, Y) && !ellipse(20233.637848, 23874.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20114.384552, 25009.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19556.714233, 30475.800995, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:05 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45.gif
[Sun May 26 11:23:48 2013] Mean detx,y = (7352.56, 579.61) 
[Sun May 26 11:23:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:24:22 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:24:22 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sun May 26 11:24:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sun May 26 16:39:44 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:44 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 2827.00
[Sun May 26 16:39:44 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_bgd.pi.gz = 12768.00
[Sun May 26 16:39:44 2013] Got source and background scale factors 1029878.000000, 8404805.000000
[Sun May 26 16:39:44 2013] User source parameters:
  Position = (226.6, 313.1) = 17 3 22.09 -48 48 4.6
  Extent = 18.7 (15.1-37.4)" x 6.9 (2.4-12.4)", rotation angle = 10 (338-40) degrees
  Source aperture counts = 1262.5 +/- 54.2
  Background aperture counts = 1564.5
  Rate = 0.1 +/- 0.005

[Sun May 26 16:40:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:10 2013] Using photon index=1.80, rate=0.0161, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45.arf
[Sun May 26 16:40:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:10 2013] Updating source flux to 3.6e-13
[Sun May 26 16:41:17 2013] Flag b found in src. 45 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] Flag c found in src. 45 procflags, skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete