[Thu May 23 13:40:59 2013] Detection parameters:
  Position = (385.5, 318.9) = 17 2 12.13 -48 47 37.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.0 +/- 29.6
  Background counts = 127.5
  Rate = 0.02 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 6.48'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Fri May 24 05:50:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.708
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 9.67"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Warning, spatial fit 96 centroid is now closest to src. 8
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 42
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.67"
[Sat May 25 09:00:48 2013] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.708
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 92 for pass 1, mean size = 9.67"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src92.ximg exists
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src92_1.ximg exists
[Sat May 25 17:22:36 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src92 appears to have run properly
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92.csv
[Sat May 25 17:22:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 11.157931 pixels away
[Sat May 25 17:23:52 2013] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 25.224731 pixels away
[Sat May 25 17:23:52 2013] Warning, spatial fit 92 centroid is now closest to src. 8
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:10 2013] XMMSAS src. selection expression = ellipse(33490.727478, 27693.956879, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_src.reg
[Sun May 26 09:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (348, 281) - (423, 356)
[Sun May 26 09:47:10 2013] XMMSAS bgd. selection expression = annulus(33490.727478, 27693.956879, 1087.500000, 2175.000000, X, Y) && !ellipse(34062.689400, 26196.226000, 2012.400058, 618.810418, 85.044740, X, Y) && !ellipse(33957.953400, 26566.317000, 1558.968045, 494.535214, 74.018300, X, Y) && !ellipse(33890.289800, 26914.746000, 1555.160045, 496.742414, 79.490400, X, Y) && !ellipse(33722.090800, 28155.964420, 1559.400045, 525.940015, 76.736300, X, Y) && !ellipse(33673.172000, 28499.129800, 1563.464045, 564.203216, 81.597600, X, Y) && !ellipse(34748.292000, 29061.422400, 1630.752047, 822.536024, 357.985230, X, Y) && !ellipse(34452.982400, 26608.660400, 1604.320046, 933.864027, 165.686000, X, Y) && !ellipse(34207.888000, 25349.957600, 1617.848047, 1531.656044, 17.116000, X, Y) && !ellipse(32910.322000, 28843.168000, 1497.744043, 521.862415, 90.000000, X, Y) && !ellipse(33099.318000, 27293.368000, 1547.320045, 441.092013, 81.769360, X, Y) && !ellipse(32764.237122, 29384.026398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33609.324982, 25346.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.579010, 25941.042816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.427765, 28235.402313, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43.gif
[Sun May 26 12:14:28 2013] Mean detx,y = (-7049.38, -1270.68) 
[Sun May 26 12:14:31 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:14:46 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:14:46 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sun May 26 12:14:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sun May 26 16:16:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 16:16:17 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:57 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 2603.00
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_bgd.pi.gz = 2023.00
[Sun May 26 16:39:57 2013] Got source and background scale factors 552774.000000, 1006551.000000
[Sun May 26 16:39:57 2013] User source parameters:
  Position = (385.5, 318.9) = 17 2 12.13 -48 47 37.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1492.0 +/- 52.0
  Background aperture counts = 1111.0
  Rate = 0.1 +/- 0.005

[Sun May 26 16:39:57 2013] Updating counts from extracted products
[Sun May 26 16:39:57 2013] Set source signif. to 1492.02/33.33 = 44.76
[Sun May 26 16:40:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:13 2013] Using photon index=1.80, rate=0.145, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43.arf
[Sun May 26 16:40:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:13 2013] Updating source flux to 2.4e-11
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete