[Thu May 23 13:40:58 2013] Detection parameters:
  Position = (225.0, 335.8) = 17 3 22.76 -48 46 24.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.9 +/- 32.9
  Background counts = 222.1
  Rate = 0.04 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 5.97'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Fri May 24 05:50:12 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.951
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 9.42"
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46.csv
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46_1.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46.csv
[Fri May 24 14:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Fri May 24 14:01:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46.csv
[Fri May 24 14:01:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:48 2013] Spatial fit model total counts = 4367.790000, observed total counts = 2963.000000
[Fri May 24 14:02:48 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 95
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.42"
[Sat May 25 09:00:48 2013] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.951
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 9.42"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45.csv
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45_1.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45.csv
[Sat May 25 17:22:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sat May 25 17:22:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45.csv
[Sat May 25 17:22:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 4262.320000, observed total counts = 2963.000000
[Sat May 25 17:23:52 2013] Poor agreement between spatial fit and data for source 37
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:05 2013] XMMSAS src. selection expression = ellipse(19528.212494, 29167.776917, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:05 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_src.reg
[Sun May 26 09:47:05 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (188, 298) - (263, 373)
[Sun May 26 09:47:05 2013] XMMSAS bgd. selection expression = annulus(19528.212494, 29167.776917, 1087.500000, 2175.000000, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.527985, 29284.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19666.016000, 27190.432000, 1496.832043, 550.140816, 10.475600, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(19278.357000, 25896.200620, 1471.264042, 640.131218, 90.462239, X, Y) && !ellipse(19743.990707, 28211.661041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.289600, 25539.581400, 2094.696060, 686.689620, 72.263200, X, Y) && !ellipse(18681.311249, 30960.699615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18446.520000, 30059.844000, 2402.288069, 300.286409, 11.944100, X, Y) && !ellipse(18741.158264, 26307.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19482.998672, 29911.524963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.399600, 29234.073600, 1598.608046, 803.680023, 191.538000, X, Y) && !ellipse(19556.714233, 30475.800995, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:05 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37.gif
[Sun May 26 11:27:48 2013] Mean detx,y = (7121.21, 2519.19) 
[Sun May 26 11:27:51 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:28:13 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:28:13 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 26 11:28:13 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 26 14:42:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 14:42:41 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:46 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:46 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 2070.00
[Sun May 26 16:39:46 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 1120.00
[Sun May 26 16:39:46 2013] Got source and background scale factors 907908.000000, 576393.000000
[Sun May 26 16:39:46 2013] User source parameters:
  Position = (225.0, 335.8) = 17 3 22.76 -48 46 24.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 305.8 +/- 46.5
  Background aperture counts = 1764.2
  Rate = 0.03 +/- 0.005

[Sun May 26 16:39:46 2013] Updating counts from extracted products
[Sun May 26 16:39:46 2013] Set source signif. to 305.83/42.00 = 7.28
[Sun May 26 16:40:10 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:10 2013] Using photon index=1.80, rate=0.0297, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37.arf
[Sun May 26 16:40:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:10 2013] Updating source flux to 8.6e-13
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete