[Thu May 23 13:40:58 2013] Detection parameters:
  Position = (224.5, 344.4) = 17 3 22.99 -48 45 48.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.6 +/- 28.4
  Background counts = 182.9
  Rate = 0.02 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 6.31'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Fri May 24 05:50:12 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.753
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 92 for pass 0, mean size = 9.58"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Fri May 24 14:01:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:48 2013] Source 34 is offset by -1.403969 and -2.535851 pixels which is larger than
2 X fitted extent = 1.112993 x 1.112993, not incorporating fit results
[Fri May 24 14:02:49 2013] Warning, spatial fit 92 centroid is now closest to src. 33
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 90
[Fri May 24 14:02:49 2013] Source is confused with source 33
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.58"
[Sat May 25 09:00:48 2013] source mask rpix=2.2, npix_max = 29, mask sum = 22, frac = 0.753
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 88 for pass 1, mean size = 9.58"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88.csv
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88_1.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88.csv
[Sat May 25 17:22:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88_1.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88.csv
[Sat May 25 17:22:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Source 34 is offset by -1.403969 and -2.535851 pixels which is larger than
2 X fitted extent = 1.112993 x 1.112993, not incorporating fit results
[Sat May 25 17:23:52 2013] Warning, spatial fit 88 centroid is now closest to src. 90
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:10 2013] XMMSAS src. selection expression = ellipse(19482.998672, 29911.524963, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_src.reg
[Sun May 26 09:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (187, 307) - (262, 382)
[Sun May 26 09:47:10 2013] XMMSAS bgd. selection expression = annulus(19482.998672, 29911.524963, 1087.500000, 2175.000000, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18868.527985, 29284.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19666.016000, 27190.432000, 1496.832043, 550.140816, 10.475600, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(19528.212494, 29167.776917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19743.990707, 28211.661041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18681.311249, 30960.699615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18446.520000, 30059.844000, 2402.288069, 300.286409, 11.944100, X, Y) && !ellipse(18125.399600, 29234.073600, 1598.608046, 803.680023, 191.538000, X, Y) && !ellipse(19556.714233, 30475.800995, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34.gif
[Sun May 26 12:12:05 2013] Mean detx,y = (7099.07, 3333.91) 
[Sun May 26 12:12:07 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:12:27 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:12:28 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sun May 26 12:12:28 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sun May 26 16:11:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 16:11:37 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:56 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:56 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_src_b10.pi.gz = 1602.00
[Sun May 26 16:39:56 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_bgd.pi.gz = 1232.00
[Sun May 26 16:39:56 2013] Got source and background scale factors 793276.000000, 695335.000000
[Sun May 26 16:39:56 2013] User source parameters:
  Position = (224.5, 344.4) = 17 3 22.99 -48 45 48.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 196.5 +/- 41.0
  Background aperture counts = 1405.5
  Rate = 0.02 +/- 0.004

[Sun May 26 16:39:56 2013] Updating counts from extracted products
[Sun May 26 16:39:56 2013] Set source signif. to 196.47/37.49 = 5.24
[Sun May 26 16:40:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:12 2013] Using photon index=1.80, rate=0.0191, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34.arf
[Sun May 26 16:40:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:12 2013] Updating source flux to 1e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete