[Thu May 23 13:40:58 2013] Detection parameters:
  Position = (254.4, 390.1) = 17 3 9.80 -48 42 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.9 +/- 26.8
  Background counts = 202.7
  Rate = 0.03 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 7.37'
[Fri May 24 05:50:12 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Fri May 24 05:50:12 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.877
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 10.11"
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64.csv
[Fri May 24 14:01:33 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri May 24 14:01:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64.csv
[Fri May 24 14:01:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri May 24 14:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64.csv
[Fri May 24 14:01:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri May 24 14:01:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64.csv
[Fri May 24 14:01:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Source 30 is offset by -0.860315 and -2.573111 pixels which is larger than
2 X fitted extent = 1.191963 x 1.191963, not incorporating fit results
[Fri May 24 14:02:49 2013] Warning, spatial fit 64 centroid is now closest to src. 83
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 85
[Sat May 25 09:00:48 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Sat May 25 09:00:48 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.877
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 10.11"
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62.csv
[Sat May 25 17:22:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62_1.ximg exists
[Sat May 25 17:22:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62.csv
[Sat May 25 17:22:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sat May 25 17:22:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning, spatial fit 62 centroid is now closest to src. 83
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:06 2013] XMMSAS src. selection expression = ellipse(22087.088577, 33887.893311, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:06 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_src.reg
[Sun May 26 09:47:06 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (217, 353) - (292, 428)
[Sun May 26 09:47:07 2013] XMMSAS bgd. selection expression = annulus(22087.088577, 33887.893311, 1087.500000, 2175.000000, X, Y) && !ellipse(25034.480408, 34478.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.422000, 36942.842000, 1102.832032, 226.028007, 355.862460, X, Y) && !ellipse(24798.870000, 35037.407200, 1455.840042, 498.974414, 0.524374, X, Y) && !ellipse(24798.241400, 35946.744400, 1684.696048, 882.936025, 77.846000, X, Y) && !ellipse(24517.937000, 37859.544000, 1808.224052, 821.856024, 80.499000, X, Y) && !ellipse(23784.025330, 34289.031067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24254.586000, 35857.336000, 1671.944048, 1671.944048, 0.000000, X, Y) && !ellipse(18446.520000, 30059.844000, 2402.288069, 300.286409, 11.944100, X, Y) && !ellipse(26151.802000, 34917.628000, 2549.792073, 1382.800040, 339.590100, X, Y) && !ellipse(22350.978577, 34728.868530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22666.807587, 34589.275055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21677.097626, 33703.663483, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:07 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30.gif
[Sun May 26 11:36:24 2013] Mean detx,y = (3591.76, 6896.33) 
[Sun May 26 11:36:27 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:36:47 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:36:47 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun May 26 11:36:47 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun May 26 15:16:37 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 15:16:37 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:50 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:50 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 1729.00
[Sun May 26 16:39:50 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_bgd.pi.gz = 4397.00
[Sun May 26 16:39:50 2013] Got source and background scale factors 861514.000000, 3111118.000000
[Sun May 26 16:39:50 2013] User source parameters:
  Position = (254.4, 390.1) = 17 3 9.80 -48 42 31.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 511.4 +/- 42.6
  Background aperture counts = 1217.6
  Rate = 0.05 +/- 0.004

[Sun May 26 16:39:50 2013] Updating counts from extracted products
[Sun May 26 16:39:50 2013] Set source signif. to 511.41/34.89 = 14.66
[Sun May 26 16:40:11 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:11 2013] Using photon index=1.80, rate=0.0497, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30.arf
[Sun May 26 16:40:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:11 2013] Updating source flux to 1.2e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete