[Thu May 23 13:40:58 2013] Detection parameters:
  Position = (316.1, 400.7) = 17 2 42.69 -48 41 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215.2 +/- 23.2
  Background counts = 209.9
  Rate = 0.02 +/- 0.002

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 7.53'
[Fri May 24 05:50:12 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Fri May 24 05:50:12 2013] source mask rpix=2.3, npix_max = 32, mask sum = 32, frac = 0.990
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 10.19"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Warning, spatial fit 90 centroid is now closest to src. 75
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 80
[Sat May 25 09:00:48 2013] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 10.19"
[Sat May 25 09:00:48 2013] source mask rpix=2.3, npix_max = 32, mask sum = 32, frac = 0.990
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 10.19"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86.csv
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86_1.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86.csv
[Sat May 25 17:22:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat May 25 17:22:38 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sat May 25 17:22:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat May 25 17:22:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning, spatial fit 86 centroid is now closest to src. 82
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:10 2013] XMMSAS src. selection expression = ellipse(27453.166962, 34816.314575, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_src.reg
[Sun May 26 09:47:10 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (279, 363) - (354, 438)
[Sun May 26 09:47:10 2013] XMMSAS bgd. selection expression = annulus(27453.166962, 34816.314575, 1087.500000, 2175.000000, X, Y) && !ellipse(25034.480408, 34478.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.422000, 36942.842000, 1102.832032, 226.028007, 355.862460, X, Y) && !ellipse(24798.870000, 35037.407200, 1455.840042, 498.974414, 0.524374, X, Y) && !ellipse(24798.241400, 35946.744400, 1684.696048, 882.936025, 77.846000, X, Y) && !ellipse(24464.125000, 38055.751210, 1837.632053, 700.172020, 72.338200, X, Y) && !ellipse(24370.053160, 38671.034600, 2505.000072, 709.836020, 76.027900, X, Y) && !ellipse(24517.937000, 37859.544000, 1808.224052, 821.856024, 80.499000, X, Y) && !ellipse(25698.256317, 35013.256683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26636.856800, 35198.382220, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(24254.586000, 35857.336000, 1671.944048, 1671.944048, 0.000000, X, Y) && !ellipse(27410.537811, 35242.117554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.230000, 35222.424000, 2829.032081, 1317.032038, 157.650000, X, Y) && !ellipse(28498.671600, 35673.065600, 1683.680048, 1145.352033, 137.429400, X, Y) && !ellipse(26151.802000, 34917.628000, 2549.792073, 1382.800040, 339.590100, X, Y) && !ellipse(25755.400513, 35409.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.554413, 35677.417572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.863342, 34664.154846, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:10 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25.gif
[Sun May 26 12:10:54 2013] Mean detx,y = (-1856.13, 7027.96) 
[Sun May 26 12:10:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:11:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:11:17 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sun May 26 12:11:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sun May 26 16:11:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 16:11:08 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:56 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:56 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 1881.00
[Sun May 26 16:39:56 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_bgd.pi.gz = 111.00
[Sun May 26 16:39:56 2013] Got source and background scale factors 867844.000000, 82876.000000
[Sun May 26 16:39:56 2013] User source parameters:
  Position = (316.1, 400.7) = 17 2 42.69 -48 41 48.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 718.7 +/- 44.4
  Background aperture counts = 1162.3
  Rate = 0.07 +/- 0.004

[Sun May 26 16:39:56 2013] Updating counts from extracted products
[Sun May 26 16:39:56 2013] Set source signif. to 718.65/34.09 = 21.08
[Sun May 26 16:40:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:12 2013] Using photon index=1.80, rate=0.0698, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25.arf
[Sun May 26 16:40:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:12 2013] Updating source flux to 1.6e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete