[Thu May 23 13:40:57 2013] Detection parameters:
  Position = (272.5, 498.0) = 17 3 1.82 -48 34 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 651.6 +/- 36.1
  Background counts = 75.1
  Rate = 0.06 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 14.59'
[Fri May 24 05:50:12 2013] Using EEF radius (= 13.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 13.72"
[Fri May 24 05:50:12 2013] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.048
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 13.72"
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src22.ximg exists
[Fri May 24 14:01:32 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri May 24 14:01:32 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src22 appears to have run properly
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri May 24 14:01:35 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri May 24 14:01:35 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri May 24 14:02:48 2013] Spatial fit model total counts = 3145.980000, observed total counts = 3148.000000
[Fri May 24 14:02:48 2013] Offset between fit and detection position for source 11 = 1.684964 pixels
[Fri May 24 14:02:48 2013] 2676.960000 total counts/ 1313.620000 bgd. counts: snr = 37.615713
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.684964 pixels
  Position = (272.5, 496.3) = 17 3 1.83 -48 34 48.0
  Extent = 27.4 (27.4-54.9)" x 8.2 (7.3-9.0)", rotation angle = 77 (75-80) degrees
  Source counts = 1363.3 +/- 51.7
  Background counts = 1313.6
  Rate = 0.1 +/- 0.005
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.05
[Fri May 24 14:02:49 2013] Source is asymmetric
[Fri May 24 14:02:49 2013] Source is confused with source 10
[Sat May 25 09:00:48 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 17.81"
[Sat May 25 09:00:48 2013] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.959
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 17.81"
[Sat May 25 17:22:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src22.ximg exists
[Sat May 25 17:22:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat May 25 17:22:34 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src22 appears to have run properly
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat May 25 17:22:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat May 25 17:22:37 2013] Fit fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 4671.730000, observed total counts = 4634.000000
[Sat May 25 17:23:52 2013] Offset between fit and detection position for source 11 = 1.325204 pixels
[Sat May 25 17:23:52 2013] 4537.460000 total counts/ 2402.640000 bgd. counts: snr = 43.552883
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.325204 pixels
  Position = (272.7, 495.0) = 17 3 1.75 -48 34 53.7
  Extent = 35.6 (35.5-71.2)" x 8.9 (8.2-9.5)", rotation angle = 80 (78-81) degrees
  Source counts = 2134.8 +/- 67.4
  Background counts = 2402.6
  Rate = 0.2 +/- 0.007
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.74
[Sat May 25 17:23:52 2013] Source is asymmetric
[Sun May 26 09:47:02 2013] Counts = 2134.820000, rescaling region sizes by 2.000000
[Sun May 26 09:47:02 2013] XMMSAS src. selection expression = ellipse(23675.192640, 43013.703000, 4274.952123, 1063.808431, 79.929200, X, Y)
[Sun May 26 09:47:02 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_src.reg
[Sun May 26 09:47:02 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (27, 249) - (518, 595)
[Sun May 26 09:47:03 2013] XMMSAS bgd. selection expression = annulus(23675.192640, 43013.703000, 14249.840410, 28499.680820, X, Y) && !ellipse(25034.480408, 34478.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.422000, 36942.842000, 1102.832032, 226.028007, 355.862460, X, Y) && !ellipse(24798.870000, 35037.407200, 1455.840042, 498.974414, 0.524374, X, Y) && !ellipse(24798.241400, 35946.744400, 1684.696048, 882.936025, 77.846000, X, Y) && !ellipse(27625.396600, 20668.033340, 551.796816, 551.796816, 0.000000, X, Y) && !ellipse(23959.395325, 41361.413147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29301.588400, 20873.724200, 2501.584072, 947.248027, 350.624530, X, Y) && !ellipse(24464.125000, 38055.751210, 1837.632053, 700.172020, 72.338200, X, Y) && !ellipse(24059.989075, 40842.819550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24293.207200, 40042.604000, 1822.000052, 368.028811, 350.069850, X, Y) && !ellipse(27032.048200, 20648.934000, 1364.056039, 450.891213, 352.246000, X, Y) && !ellipse(24298.708069, 39276.901855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29770.815600, 21014.557400, 1976.968057, 552.518416, 351.042710, X, Y) && !ellipse(23876.287000, 41842.977000, 2107.600061, 605.331217, 76.650300, X, Y) && !ellipse(24370.053160, 38671.034600, 2505.000072, 709.836020, 76.027900, X, Y) && !ellipse(23705.633200, 42827.451600, 2166.728062, 656.975219, 78.411400, X, Y) && !ellipse(24517.937000, 37859.544000, 1808.224052, 821.856024, 80.499000, X, Y) && !ellipse(27523.503998, 20134.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.179800, 18520.031600, 3147.792091, 1046.984030, 76.690200, X, Y) && !ellipse(24491.240000, 38329.034000, 925.360027, 925.360027, 0.000000, X, Y) && !ellipse(34062.689400, 26196.226000, 2012.400058, 618.810418, 85.044740, X, Y) && !ellipse(33957.953400, 26566.317000, 1558.968045, 494.535214, 74.018300, X, Y) && !ellipse(29476.806600, 20862.883200, 1443.400042, 1058.184030, 159.138000, X, Y) && !ellipse(33890.289800, 26914.746000, 1555.160045, 496.742414, 79.490400, X, Y) && !ellipse(23784.025330, 34289.031067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23577.252000, 43630.536000, 1054.792030, 1054.792030, 0.000000, X, Y) && !ellipse(30255.978000, 20338.064000, 1334.720038, 1334.720038, 0.000000, X, Y) && !ellipse(34021.658997, 24405.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33722.090800, 28155.964420, 1559.400045, 525.940015, 76.736300, X, Y) && !ellipse(33673.172000, 28499.129800, 1563.464045, 564.203216, 81.597600, X, Y) && !ellipse(25698.256317, 35013.256683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25865.979828, 20801.341522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(32496.702000, 21462.710400, 1556.928045, 549.974416, 351.077410, X, Y) && !ellipse(18868.527985, 29284.157471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19666.016000, 27190.432000, 1496.832043, 550.140816, 10.475600, X, Y) && !ellipse(27677.606600, 18603.950000, 1573.896045, 1573.896045, 0.000000, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(28368.459106, 21208.595139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26636.856800, 35198.382220, 1274.896037, 1274.896037, 0.000000, X, Y) && !ellipse(19528.212494, 29167.776917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19278.357000, 25896.200620, 1471.264042, 640.131218, 90.462239, X, Y) && !ellipse(26271.688000, 20500.113620, 1398.112040, 452.268813, 351.239900, X, Y) && !ellipse(24968.392400, 20237.520600, 1404.496040, 692.487220, 348.465800, X, Y) && !ellipse(28989.499664, 20061.495041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25782.186280, 20425.296600, 1394.232040, 522.744015, 342.609000, X, Y) && !ellipse(19743.990707, 28211.661041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34748.292000, 29061.422400, 1630.752047, 822.536024, 357.985230, X, Y) && !ellipse(29917.670000, 20537.460000, 1533.960044, 1533.960044, 0.000000, X, Y) && !ellipse(34234.358704, 23975.604279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.109800, 19788.738000, 1461.728042, 416.301612, 84.776760, X, Y) && !ellipse(33260.229800, 21519.444800, 1600.240046, 809.176023, 345.282300, X, Y) && !ellipse(27574.469940, 21100.328354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22087.088577, 33887.893311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29692.765000, 19157.626000, 1532.328044, 760.439222, 2.778110, X, Y) && !ellipse(29591.822266, 21400.428970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19386.289600, 25539.581400, 2094.696060, 686.689620, 72.263200, X, Y) && !ellipse(28694.900200, 20778.366000, 1420.488041, 1420.488041, 0.000000, X, Y) && !ellipse(28084.727200, 16704.143600, 2519.904073, 796.188023, 82.728630, X, Y) && !ellipse(24254.586000, 35857.336000, 1671.944048, 1671.944048, 0.000000, X, Y) && !ellipse(27410.537811, 35242.117554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18681.311249, 30960.699615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18446.520000, 30059.844000, 2402.288069, 300.286409, 11.944100, X, Y) && !ellipse(18741.158264, 26307.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.988632, 25443.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23516.770081, 44102.417603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27905.230000, 35222.424000, 2829.032081, 1317.032038, 157.650000, X, Y) && !ellipse(28498.671600, 35673.065600, 1683.680048, 1145.352033, 137.429400, X, Y) && !ellipse(31801.258600, 20141.744000, 1553.512045, 1553.512045, 0.000000, X, Y) && !ellipse(26151.802000, 34917.628000, 2549.792073, 1382.800040, 339.590100, X, Y) && !ellipse(32884.406200, 33765.010800, 2238.408064, 627.268018, 76.355786, X, Y) && !ellipse(31940.033722, 20845.356598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34452.982400, 26608.660400, 1604.320046, 933.864027, 165.686000, X, Y) && !ellipse(22350.978577, 34728.868530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.733749, 23441.282288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30973.058777, 20780.986740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25755.400513, 35409.347229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27453.166962, 34816.314575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.945862, 23183.391327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19482.998672, 29911.524963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.643402, 20981.951218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18125.399600, 29234.073600, 1598.608046, 803.680023, 191.538000, X, Y) && !ellipse(20233.637848, 23874.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.727478, 27693.956879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33686.928833, 21708.802658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31195.062400, 21295.358000, 1509.048043, 1509.048043, 0.000000, X, Y) && !ellipse(32803.263397, 20923.537918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20114.384552, 25009.313385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.554413, 35677.417572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19556.714233, 30475.800995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33835.201599, 21094.965195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.888000, 25349.957600, 1617.848047, 1531.656044, 17.116000, X, Y) && !ellipse(32230.422241, 30854.458618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32910.322000, 28843.168000, 1497.744043, 521.862415, 90.000000, X, Y) && !ellipse(22666.807587, 34589.275055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28108.900787, 16309.247009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.133423, 14744.711258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25885.863342, 34664.154846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.318000, 27293.368000, 1547.320045, 441.092013, 81.769360, X, Y) && !ellipse(29870.669373, 21459.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21677.097626, 33703.663483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.237122, 29384.026398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33609.324982, 25346.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28225.092834, 15265.868286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32353.445679, 21854.314194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.579010, 25941.042816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28412.418427, 14128.983414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33089.427765, 28235.402313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28477.397614, 13687.596741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28171.538239, 15757.823975, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:03 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11.gif
[Sun May 26 11:00:23 2013] Mean detx,y = (756.21, 14359.54) 
[Sun May 26 11:00:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 11:08:09 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 11:08:09 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 26 11:08:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun May 26 16:39:38 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:38 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 10506.00
[Sun May 26 16:39:38 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_bgd.pi.gz = 246920.00
[Sun May 26 16:39:39 2013] Got source and background scale factors 9136812.000000, 314544952.000000
[Sun May 26 16:39:39 2013] User source parameters:
  Position = (272.7, 495.0) = 17 3 1.75 -48 34 53.7
  Extent = 35.6 (35.5-71.2)" x 8.9 (8.2-9.5)", rotation angle = 80 (78-81) degrees
  Source aperture counts = 3333.5 +/- 103.5
  Background aperture counts = 7172.5
  Rate = 0.3 +/- 0.01

[Sun May 26 16:40:09 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:09 2013] Using photon index=1.80, rate=0.207, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11.arf
[Sun May 26 16:40:09 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:09 2013] Updating source flux to 7.8e-12
[Sun May 26 16:41:17 2013] Flag c found in src. 11 procflags, skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete