[Thu May 23 13:41:02 2013] Detection parameters:
  Position = (356.7, 245.3) = 17 2 24.78 -48 52 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.3 +/- 24.0
  Background counts = 274.7
  Rate = 0.02 +/- 0.002

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 5.71'
[Fri May 24 05:50:12 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Fri May 24 05:50:12 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.612
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 98 for pass 0, mean size = 9.29"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Warning, spatial fit 98 centroid is now closest to src. 58
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 57
[Sat May 25 09:00:48 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Sat May 25 09:00:48 2013] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.612
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 9.29"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94.csv
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94_1.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94.csv
[Sat May 25 17:22:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94.csv
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94.csv
[Sat May 25 17:22:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 107 at 10.543076 pixels away
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 9570.600000, observed total counts = 9572.000000
[Sat May 25 17:23:52 2013] Offset between fit and detection position for source 107 = 6.781262 pixels
[Sat May 25 17:23:52 2013] Warning, changing simple spatial fit ID from 94 to 77
[Sat May 25 17:23:52 2013] 9413.739000 total counts/ 8778.630000 bgd. counts: snr = 6.778520
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 6.781262 pixels
  Position = (360.5, 250.9) = 17 2 23.10 -48 52 35.0
  Extent = 34.8 (28.5-37.9)", rotation angle = 0
  Source counts = 635.1 +/- 97.0
  Background counts = 8778.6
  Rate = 0.06 +/- 0.009
[Sat May 25 17:23:52 2013] Spatial fit model total counts = 3938.420000, observed total counts = 3922.000000
[Sat May 25 17:23:52 2013] Offset between fit and detection position for source 107 = 5.767464 pixels
[Sat May 25 17:23:52 2013] Warning, changing simple spatial fit ID from 77 to 84
[Sat May 25 17:23:52 2013] 3725.538000 total counts/ 3035.370000 bgd. counts: snr = 12.527055
Spatial fit parameters:
  Offset between fit and detection position for source 107 = 5.767464 pixels
  Position = (359.1, 245.3) = 17 2 23.70 -48 52 59.4
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source counts = 690.2 +/- 61.0
  Background counts = 3035.4
  Rate = 0.07 +/- 0.006
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:11 2013] XMMSAS src. selection expression = ellipse(31195.062400, 21295.358000, 1131.786033, 1131.786033, 0.000000, X, Y)
[Sun May 26 09:47:11 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_src.reg
[Sun May 26 09:47:11 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (294, 180) - (424, 310)
[Sun May 26 09:47:11 2013] XMMSAS bgd. selection expression = annulus(31195.062400, 21295.358000, 1886.310054, 3772.620109, X, Y) && !ellipse(27625.396600, 20668.033340, 551.796816, 551.796816, 0.000000, X, Y) && !ellipse(29301.588400, 20873.724200, 2501.584072, 947.248027, 350.624530, X, Y) && !ellipse(27032.048200, 20648.934000, 1364.056039, 450.891213, 352.246000, X, Y) && !ellipse(29770.815600, 21014.557400, 1976.968057, 552.518416, 351.042710, X, Y) && !ellipse(27523.503998, 20134.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27704.179800, 18520.031600, 3147.792091, 1046.984030, 76.690200, X, Y) && !ellipse(34062.689400, 26196.226000, 2012.400058, 618.810418, 85.044740, X, Y) && !ellipse(33957.953400, 26566.317000, 1558.968045, 494.535214, 74.018300, X, Y) && !ellipse(29476.806600, 20862.883200, 1443.400042, 1058.184030, 159.138000, X, Y) && !ellipse(30255.978000, 20338.064000, 1334.720038, 1334.720038, 0.000000, X, Y) && !ellipse(34021.658997, 24405.496002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30711.056400, 21176.286460, 1477.000043, 451.904013, 347.101600, X, Y) && !ellipse(32496.702000, 21462.710400, 1556.928045, 549.974416, 351.077410, X, Y) && !ellipse(27677.606600, 18603.950000, 1573.896045, 1573.896045, 0.000000, X, Y) && !ellipse(28368.459106, 21208.595139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26271.688000, 20500.113620, 1398.112040, 452.268813, 351.239900, X, Y) && !ellipse(28989.499664, 20061.495041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.670000, 20537.460000, 1533.960044, 1533.960044, 0.000000, X, Y) && !ellipse(34234.358704, 23975.604279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28475.109800, 19788.738000, 1461.728042, 416.301612, 84.776760, X, Y) && !ellipse(33260.229800, 21519.444800, 1600.240046, 809.176023, 345.282300, X, Y) && !ellipse(27574.469940, 21100.328354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29692.765000, 19157.626000, 1532.328044, 760.439222, 2.778110, X, Y) && !ellipse(29591.822266, 21400.428970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28694.900200, 20778.366000, 1420.488041, 1420.488041, 0.000000, X, Y) && !ellipse(28084.727200, 16704.143600, 2519.904073, 796.188023, 82.728630, X, Y) && !ellipse(31801.258600, 20141.744000, 1553.512045, 1553.512045, 0.000000, X, Y) && !ellipse(31940.033722, 20845.356598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34452.982400, 26608.660400, 1604.320046, 933.864027, 165.686000, X, Y) && !ellipse(30973.058777, 20780.986740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34313.945862, 23183.391327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.643402, 20981.951218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33686.928833, 21708.802658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32803.263397, 20923.537918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33835.201599, 21094.965195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34207.888000, 25349.957600, 1617.848047, 1531.656044, 17.116000, X, Y) && !ellipse(29870.669373, 21459.671967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33609.324982, 25346.560516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32353.445679, 21854.314194, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:11 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107.gif
[Sun May 26 12:15:32 2013] Mean detx,y = (-3513.82, -7422.12) 
[Sun May 26 12:15:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:15:59 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:15:59 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_src_b10.pi.gz
[Sun May 26 12:15:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_bgd.pi.gz
[Sun May 26 16:39:57 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_src_b10.pi.gz = 5955.00
[Sun May 26 16:39:57 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_bgd.pi.gz = 7441.00
[Sun May 26 16:39:57 2013] Got source and background scale factors 2325008.000000, 6461618.000000
[Sun May 26 16:39:58 2013] User source parameters:
  Position = (359.1, 245.3) = 17 2 23.70 -48 52 59.4
  Extent = 18.9 (18.8-37.7)", rotation angle = 0
  Source aperture counts = 3277.6 +/- 78.2
  Background aperture counts = 2677.4
  Rate = 0.3 +/- 0.008

[Sun May 26 16:40:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:13 2013] Using photon index=1.80, rate=0.0671, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107.arf
[Sun May 26 16:40:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:13 2013] Updating source flux to 1.3e-12
[Sun May 26 16:41:17 2013] Flag c found in src. 107 procflags, skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src107_pl.csv not found, spectral fit skipped or did not complete