[Thu May 23 13:41:02 2013] Detection parameters:
  Position = (231.8, 288.0) = 17 3 19.83 -48 49 51.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.0 +/- 27.4
  Background counts = 284.5
  Rate = 0.02 +/- 0.003

[Thu May 23 13:41:03 2013] Off-axis axis estimate = 4.89'
[Fri May 24 05:50:12 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Fri May 24 05:50:12 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Fri May 24 05:50:12 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Fri May 24 05:50:12 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 8.88"
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100.csv
[Fri May 24 14:01:34 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100_1.ximg exists
[Fri May 24 14:01:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100.csv
[Fri May 24 14:01:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100.csv
[Fri May 24 14:01:37 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Fri May 24 14:01:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100.csv
[Fri May 24 14:01:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:49 2013] Warning, spatial fit 100 centroid is now closest to src. 50
[Fri May 24 14:02:49 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:49 2013] Assessing source extent using major
[Fri May 24 14:02:49 2013] Source does appear to be extended
[Fri May 24 14:02:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:49 2013] Source is confused with source 50
[Sat May 25 09:00:48 2013] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sat May 25 09:00:48 2013] Initial guess for spatial extent in simple fitting = 8.88"
[Sat May 25 09:00:48 2013] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.162
[Sat May 25 09:00:48 2013] Giving source the simple spatial ID 96 for pass 1, mean size = 8.88"
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96.csv
[Sat May 25 17:22:36 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96_1.ximg exists
[Sat May 25 17:22:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96.csv
[Sat May 25 17:22:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96.csv
[Sat May 25 17:22:39 2013] fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Sat May 25 17:22:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96.csv
[Sat May 25 17:22:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:52 2013] Warning, spatial fit 96 centroid is now closest to src. 50
[Sat May 25 17:23:52 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:52 2013] Assessing source extent using major
[Sat May 25 17:23:52 2013] Source does appear to be extended
[Sat May 25 17:23:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 09:47:11 2013] XMMSAS src. selection expression = ellipse(20114.384552, 25009.313385, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 09:47:11 2013] Writing source region out to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_src.reg
[Sun May 26 09:47:11 2013] Extracting stamp from image fullrun_mos2_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (194, 251) - (269, 326)
[Sun May 26 09:47:11 2013] XMMSAS bgd. selection expression = annulus(20114.384552, 25009.313385, 1087.500000, 2175.000000, X, Y) && !ellipse(19149.449997, 27801.249268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19666.016000, 27190.432000, 1496.832043, 550.140816, 10.475600, X, Y) && !ellipse(19051.776600, 28215.205200, 1511.888044, 469.507214, 80.200200, X, Y) && !ellipse(18986.868600, 27324.142000, 1496.832043, 296.464809, 349.685000, X, Y) && !ellipse(19278.357000, 25896.200620, 1471.264042, 640.131218, 90.462239, X, Y) && !ellipse(19386.289600, 25539.581400, 2094.696060, 686.689620, 72.263200, X, Y) && !ellipse(18741.158264, 26307.635986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.988632, 25443.888580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19564.733749, 23441.282288, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20233.637848, 23874.455627, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 09:47:11 2013] Writing fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103.gif
[Sun May 26 12:16:37 2013] Mean detx,y = (7161.44, -1612.24) 
[Sun May 26 12:16:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 12:16:56 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 12:16:57 2013] Setting source spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_src_b10.pi.gz
[Sun May 26 12:16:57 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_bgd.pi.gz
[Sun May 26 16:20:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 16:20:38 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:58 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:58 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_src_b10.pi.gz = 2588.00
[Sun May 26 16:39:58 2013] Total counts from fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_bgd.pi.gz = 1871.00
[Sun May 26 16:39:58 2013] Got source and background scale factors 1031068.000000, 1022988.000000
[Sun May 26 16:39:58 2013] User source parameters:
  Position = (231.8, 288.0) = 17 3 19.83 -48 49 51.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 702.2 +/- 51.9
  Background aperture counts = 1885.8
  Rate = 0.07 +/- 0.005

[Sun May 26 16:39:58 2013] Updating counts from extracted products
[Sun May 26 16:39:58 2013] Set source signif. to 702.22/43.43 = 16.17
[Sun May 26 16:40:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:40:13 2013] Using photon index=1.80, rate=0.0682, arf fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103.arf
[Sun May 26 16:40:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:40:13 2013] Updating source flux to 1.5e-12
[Sun May 26 16:41:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:56 2013] xmm0111360201/analysis//spectral/fullrun_mos2_xmm0111360201_pi300-10000_pass1_cl_src103_pl.csv not found, spectral fit skipped or did not complete