[Thu May 23 13:40:54 2013] Detection parameters:
  Position = (390.4, 329.8) = 17 2 10.00 -48 46 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.3 +/- 28.6
  Background counts = 343.8
  Rate = 0.04 +/- 0.005

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 7.04'
[Thu May 23 22:04:18 2013] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 9.95"
[Thu May 23 22:04:18 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.901
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.95"
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src25.ximg exists
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri May 24 05:50:06 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src25 appears to have run properly
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri May 24 05:50:10 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri May 24 14:02:26 2013] Spatial fit model total counts = 3673.140000, observed total counts = 3668.000000
[Fri May 24 14:02:26 2013] Offset between fit and detection position for source 88 = 3.248255 pixels
[Fri May 24 14:02:26 2013] 3704.483000 total counts/ 2833.460000 bgd. counts: snr = 16.363307
Spatial fit parameters:
  Offset between fit and detection position for source 88 = 3.248255 pixels
  Position = (388.5, 332.5) = 17 2 10.81 -48 46 39.9
  Extent = 19.9 (19.9-39.8)" x 13.1 (8.9-16.7)", rotation angle = 72 (58-84) degrees
  Source counts = 871.0 +/- 60.9
  Background counts = 2833.5
  Rate = 0.08 +/- 0.006
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19
[Fri May 24 14:02:27 2013] Source is confused with source 26
[Fri May 24 23:52:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May 24 23:52:23 2013] Initial guess for spatial extent in simple fitting = 16.49"
[Fri May 24 23:52:23 2013] source mask rpix=3.8, npix_max = 73, mask sum = 64, frac = 0.869
[Fri May 24 23:52:23 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 16.49"
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24.csv
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24.csv
[Sat May 25 09:00:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat May 25 09:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Warning, spatial fit 24 centroid is now closest to src. 29
[Sat May 25 17:23:28 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:28 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:28 2013] Source does appear to be extended
[Sat May 25 17:23:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.19
[Sun May 26 03:36:16 2013] XMMSAS src. selection expression = ellipse(33753.959400, 28880.162000, 1194.018034, 784.314023, 71.636700, X, Y)
[Sun May 26 03:36:16 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_src.reg
[Sun May 26 03:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (320, 264) - (457, 401)
[Sun May 26 03:36:16 2013] XMMSAS bgd. selection expression = annulus(33753.959400, 28880.162000, 1990.030057, 3980.060115, X, Y) && !ellipse(34185.997345, 32056.809875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33469.563800, 30063.440000, 2378.104068, 598.040017, 78.386900, X, Y) && !ellipse(33033.036000, 31795.464000, 979.088028, 632.348018, 77.748000, X, Y) && !ellipse(32783.844000, 32667.958000, 3511.632101, 883.432025, 323.470400, X, Y) && !ellipse(33353.101000, 30887.450000, 1649.616047, 766.337622, 91.398260, X, Y) && !ellipse(34437.418000, 33933.048000, 1755.816051, 1755.816051, 0.000000, X, Y) && !ellipse(33415.475983, 33020.697021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33346.180600, 30771.490000, 2415.952070, 594.564017, 78.942100, X, Y) && !ellipse(33320.510895, 28737.452423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32955.308600, 33305.406000, 1709.760049, 706.774420, 77.540200, X, Y) && !ellipse(34181.146000, 29557.098000, 1631.216047, 1347.616039, 69.710000, X, Y) && !ellipse(34359.764400, 25613.902600, 1589.728046, 871.256025, 68.504482, X, Y) && !ellipse(33604.514069, 31174.915344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33750.118530, 27526.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.013275, 30134.653625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32198.269836, 31541.288147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33229.000000, 28233.910187, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32827.302032, 29618.752228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33806.179474, 26684.711212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.170410, 32424.255310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32281.812988, 31029.839233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33893.516663, 25921.230988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33790.323639, 27106.701569, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:16 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88.gif
[Sun May 26 04:17:22 2013] Mean detx,y = (171.57, 7177.57) 
[Sun May 26 04:17:24 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:17:59 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:17:59 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun May 26 04:17:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Sun May 26 16:38:55 2013] Updating aperture counts using extracted products
[Sun May 26 16:38:55 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 5657.00
[Sun May 26 16:38:55 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_bgd.pi.gz = 15687.00
[Sun May 26 16:38:55 2013] Got source and background scale factors 1816222.000000, 11239852.000000
[Sun May 26 16:38:55 2013] User source parameters:
  Position = (388.5, 332.5) = 17 2 10.81 -48 46 39.9
  Extent = 19.9 (19.9-39.8)" x 13.1 (8.9-16.7)", rotation angle = 72 (58-84) degrees
  Source aperture counts = 3122.2 +/- 76.2
  Background aperture counts = 2534.8
  Rate = 0.3 +/- 0.007

[Sun May 26 16:39:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:29 2013] Using photon index=1.80, rate=0.0847, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88.arf
[Sun May 26 16:39:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:29 2013] Updating source flux to 5.8e-12
[Sun May 26 16:40:19 2013] Flag c found in src. 88 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete