[Thu May 23 13:40:54 2013] Detection parameters:
  Position = (254.8, 391.8) = 17 3 9.62 -48 42 22.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.4 +/- 29.7
  Background counts = 263.0
  Rate = 0.04 +/- 0.005

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 7.47'
[Thu May 23 22:04:18 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Thu May 23 22:04:18 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 10.16"
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28.ximg exists
[Fri May 24 05:50:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28.csv
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri May 24 05:50:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28.csv
[Fri May 24 05:50:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri May 24 05:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri May 24 05:50:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Fri May 24 05:50:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:26 2013] Warning, spatial fit 28 centroid is now closest to src. 71
[Fri May 24 14:02:27 2013] Source 73 is offset by 1.938873 and -2.882838 pixels which is larger than
2 X fitted extent = 1.510432 x 1.510432, not incorporating fit results
[Fri May 24 14:02:27 2013] Source 73 is offset by -3.599839 and 3.050059 pixels which is larger than
2 X fitted extent = 1.407058 x 9.206805, not incorporating fit results
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:27 2013] Source is confused with source 72
[Fri May 24 14:02:27 2013] Source is confused with source 71
[Fri May 24 23:52:24 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:24 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Fri May 24 23:52:24 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.118
[Fri May 24 23:52:24 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 10.16"
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src27.ximg exists
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat May 25 09:00:43 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src27 appears to have run properly
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat May 25 09:00:46 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sat May 25 17:23:28 2013] Warning, spatial fit 27 centroid is now closest to src. 60
[Sat May 25 17:23:28 2013] Spatial fit model total counts = 6126.890000, observed total counts = 5283.000000
[Sat May 25 17:23:28 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:28 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:28 2013] Assessing source extent using major
[Sat May 25 17:23:28 2013] Source does appear to be extended
[Sat May 25 17:23:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:36:16 2013] XMMSAS src. selection expression = ellipse(22122.511978, 34040.491119, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 03:36:16 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_src.reg
[Sun May 26 03:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (217, 354) - (292, 429)
[Sun May 26 03:36:16 2013] XMMSAS bgd. selection expression = annulus(22122.511978, 34040.491119, 1087.500000, 2175.000000, X, Y) && !ellipse(24904.034000, 34729.875200, 1616.560047, 1616.560047, 0.000000, X, Y) && !ellipse(24806.978400, 35991.808200, 2108.328061, 443.940813, 77.463400, X, Y) && !ellipse(24698.396179, 36488.361755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24424.713800, 37976.274600, 1838.008053, 464.821613, 78.860200, X, Y) && !ellipse(24603.757000, 36925.145600, 2193.920063, 460.744013, 77.860300, X, Y) && !ellipse(24410.006120, 38057.584116, 2302.832066, 489.263214, 78.806000, X, Y) && !ellipse(24240.597443, 34574.781250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24352.615784, 34057.947937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23220.357300, 34479.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20545.043579, 33691.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23780.750000, 34339.244000, 1616.560047, 862.648025, 338.786900, X, Y) && !ellipse(23420.808000, 35673.194000, 1630.008047, 1630.008047, 0.000000, X, Y) && !ellipse(22667.925354, 35070.923920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21234.809200, 34027.198200, 1648.224047, 759.340822, 336.499000, X, Y) && !ellipse(22762.924000, 34146.608000, 1627.096047, 718.308021, 343.064200, X, Y) && !ellipse(21074.749802, 33517.718506, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:16 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73.gif
[Sun May 26 04:19:38 2013] Mean detx,y = (7177.01, -3672.71) 
[Sun May 26 04:19:40 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:19:59 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:19:59 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sun May 26 04:19:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sun May 26 06:49:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 06:49:07 2013] rmf not generated due to insufficient counts
[Sun May 26 16:38:56 2013] Updating aperture counts using extracted products
[Sun May 26 16:38:56 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 2577.00
[Sun May 26 16:38:56 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_bgd.pi.gz = 1943.00
[Sun May 26 16:38:56 2013] Got source and background scale factors 1225798.000000, 1422757.000000
[Sun May 26 16:38:56 2013] User source parameters:
  Position = (254.8, 391.8) = 17 3 9.62 -48 42 22.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 903.0 +/- 51.8
  Background aperture counts = 1674.0
  Rate = 0.09 +/- 0.005

[Sun May 26 16:38:56 2013] Updating counts from extracted products
[Sun May 26 16:38:56 2013] Set source signif. to 902.98/40.91 = 22.07
[Sun May 26 16:39:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:29 2013] Using photon index=1.80, rate=0.0878, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73.arf
[Sun May 26 16:39:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:29 2013] Updating source flux to 1.7e-12
[Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete