[Thu May 23 13:40:54 2013] Detection parameters:
  Position = (275.0, 391.7) = 17 3 0.75 -48 42 30.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.5 +/- 25.7
  Background counts = 236.7
  Rate = 0.02 +/- 0.002

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 6.97'
[Thu May 23 22:04:18 2013] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 9.91"
[Thu May 23 22:04:18 2013] source mask rpix=2.3, npix_max = 30, mask sum = 26, frac = 0.842
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 73 for pass 0, mean size = 9.91"
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73.csv
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73.csv
[Fri May 24 05:50:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73.csv
[Fri May 24 05:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:26 2013] Spatial fit model total counts = 5358.080000, observed total counts = 5365.000000
[Fri May 24 14:02:26 2013] Offset between fit and detection position for source 70 = 3.749897 pixels
[Fri May 24 14:02:26 2013] Warning, changing simple spatial fit ID from 73 to 41
[Fri May 24 14:02:26 2013] 5354.418000 total counts/ 4952.170000 bgd. counts: snr = 5.716051
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 3.749897 pixels
  Position = (273.9, 395.3) = 17 3 1.24 -48 42 7.4
  Extent = 20.2 (13.3-40.4)" x 10.8 (5.4-17.0)", rotation angle = 339 (314-2) degrees
  Source counts = 402.2 +/- 73.2
  Background counts = 4952.2
  Rate = 0.04 +/- 0.007
[Fri May 24 14:02:27 2013] Spatial fit model total counts = 11033.100000, observed total counts = 3820.000000
[Fri May 24 14:02:27 2013] Poor agreement between spatial fit and data for source 70
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.78
[Fri May 24 14:02:27 2013] Source is confused with source 66
[Fri May 24 23:52:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 15.50"
[Fri May 24 23:52:27 2013] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.970
[Fri May 24 23:52:27 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 15.50"
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70.csv
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70_1.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70.csv
[Sat May 25 09:00:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70.csv
[Sat May 25 09:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Warning, spatial fit 70 centroid is now closest to src. 20
[Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:29 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:29 2013] Source does appear to be extended
[Sat May 25 17:23:29 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.78
[Sun May 26 03:36:21 2013] XMMSAS src. selection expression = ellipse(23780.750000, 34339.244000, 1212.420035, 646.986019, 338.786900, X, Y)
[Sun May 26 03:36:21 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_src.reg
[Sun May 26 03:36:21 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (204, 326) - (344, 465)
[Sun May 26 03:36:21 2013] XMMSAS bgd. selection expression = annulus(23780.750000, 34339.244000, 2020.700058, 4041.400116, X, Y) && !ellipse(24904.034000, 34729.875200, 1616.560047, 1616.560047, 0.000000, X, Y) && !ellipse(24806.978400, 35991.808200, 2108.328061, 443.940813, 77.463400, X, Y) && !ellipse(24698.396179, 36488.361755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.222340, 38792.783520, 1891.824054, 421.788812, 79.015500, X, Y) && !ellipse(24424.713800, 37976.274600, 1838.008053, 464.821613, 78.860200, X, Y) && !ellipse(24603.757000, 36925.145600, 2193.920063, 460.744013, 77.860300, X, Y) && !ellipse(24410.006120, 38057.584116, 2302.832066, 489.263214, 78.806000, X, Y) && !ellipse(25830.713074, 34737.292938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22122.511978, 34040.491119, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24090.374540, 40072.364800, 1979.320057, 404.347212, 78.762800, X, Y) && !ellipse(24015.019600, 40536.490600, 2408.312069, 424.603212, 79.728500, X, Y) && !ellipse(24240.597443, 34574.781250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24231.947560, 39149.345400, 2295.280066, 428.132012, 80.620860, X, Y) && !ellipse(19336.216000, 29798.776000, 1543.392044, 192.924806, 9.969470, X, Y) && !ellipse(28103.928200, 35015.636800, 1654.464048, 867.328025, 328.249700, X, Y) && !ellipse(28726.541400, 35191.852600, 1681.640048, 902.632026, 350.463240, X, Y) && !ellipse(24166.533560, 39612.808800, 1944.056056, 354.572010, 80.615000, X, Y) && !ellipse(28414.781403, 36048.742004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24352.615784, 34057.947937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23220.357300, 34479.332947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20545.043579, 33691.269806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.004000, 35369.002000, 1616.720047, 1095.400032, 135.155100, X, Y) && !ellipse(23420.808000, 35673.194000, 1630.008047, 1630.008047, 0.000000, X, Y) && !ellipse(22667.925354, 35070.923920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21234.809200, 34027.198200, 1648.224047, 759.340822, 336.499000, X, Y) && !ellipse(27649.344421, 35790.545715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27969.044464, 34656.771210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.871613, 34469.684570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22762.924000, 34146.608000, 1627.096047, 718.308021, 343.064200, X, Y) && !ellipse(21074.749802, 33517.718506, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:21 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70.gif
[Sun May 26 04:47:14 2013] Mean detx,y = (7205.46, -1914.26) 
[Sun May 26 04:47:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:47:54 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:47:54 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Sun May 26 04:47:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Sun May 26 16:39:11 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:11 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_src_b10.pi.gz = 5330.00
[Sun May 26 16:39:11 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_bgd.pi.gz = 9261.00
[Sun May 26 16:39:12 2013] Got source and background scale factors 2065208.000000, 7384261.000000
[Sun May 26 16:39:12 2013] User source parameters:
  Position = (273.9, 395.3) = 17 3 1.24 -48 42 7.4
  Extent = 20.2 (13.3-40.4)" x 10.8 (5.4-17.0)", rotation angle = 339 (314-2) degrees
  Source aperture counts = 2739.9 +/- 74.0
  Background aperture counts = 2590.1
  Rate = 0.3 +/- 0.007

[Sun May 26 16:39:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:31 2013] Using photon index=1.80, rate=0.0391, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70.arf
[Sun May 26 16:39:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:32 2013] Updating source flux to 6.7e-13
[Sun May 26 16:40:19 2013] Flag p found in src. 70 procflags, skipping spectral fitting
[Sun May 26 16:40:19 2013] Flag c found in src. 70 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src70_pl.csv not found, spectral fit skipped or did not complete