[Thu May 23 13:40:53 2013] Detection parameters:
  Position = (322.0, 398.9) = 17 2 40.09 -48 41 59.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.6 +/- 21.8
  Background counts = 214.9
  Rate = 0.02 +/- 0.002

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 7.48'
[Thu May 23 22:04:18 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Thu May 23 22:04:18 2013] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.869
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 10.17"
[Fri May 24 05:50:08 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89.ximg exists
[Fri May 24 05:50:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89.csv
[Fri May 24 05:50:08 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89_1.ximg exists
[Fri May 24 05:50:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89.csv
[Fri May 24 05:50:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:12 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Fri May 24 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri May 24 05:50:12 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Fri May 24 05:50:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89.csv
[Fri May 24 05:50:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:27 2013] Warning, spatial fit 89 centroid is now closest to src. 59
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:27 2013] Source is confused with source 59
[Fri May 24 23:52:27 2013] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 10.17"
[Fri May 24 23:52:27 2013] source mask rpix=2.3, npix_max = 32, mask sum = 28, frac = 0.869
[Fri May 24 23:52:27 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 10.17"
[Sat May 25 09:00:45 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86.ximg exists
[Sat May 25 09:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86.csv
[Sat May 25 09:00:45 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86_1.ximg exists
[Sat May 25 09:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86.csv
[Sat May 25 09:00:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:48 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sat May 25 09:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat May 25 09:00:48 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sat May 25 09:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.csv
[Sat May 25 09:00:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Spatial fit model total counts = 17045.800000, observed total counts = 12930.000000
[Sat May 25 17:23:28 2013] Poor agreement between spatial fit and data for source 63
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:28 2013] Source 63 is offset by 5.634580 and -2.557940 pixels which is larger than
2 X fitted extent = 2.174009 x 1.584915, not incorporating fit results
[Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:29 2013] Assessing source extent using major
[Sat May 25 17:23:29 2013] Source does appear to be extended
[Sat May 25 17:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:36:22 2013] XMMSAS src. selection expression = ellipse(27969.044464, 34656.771210, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 03:36:22 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_src.reg
[Sun May 26 03:36:22 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (285, 361) - (360, 436)
[Sun May 26 03:36:22 2013] XMMSAS bgd. selection expression = annulus(27969.044464, 34656.771210, 1087.500000, 2175.000000, X, Y) && !ellipse(24904.034000, 34729.875200, 1616.560047, 1616.560047, 0.000000, X, Y) && !ellipse(24806.978400, 35991.808200, 2108.328061, 443.940813, 77.463400, X, Y) && !ellipse(24424.713800, 37976.274600, 1838.008053, 464.821613, 78.860200, X, Y) && !ellipse(24603.757000, 36925.145600, 2193.920063, 460.744013, 77.860300, X, Y) && !ellipse(24410.006120, 38057.584116, 2302.832066, 489.263214, 78.806000, X, Y) && !ellipse(32783.844000, 32667.958000, 3511.632101, 883.432025, 323.470400, X, Y) && !ellipse(25830.713074, 34737.292938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.928200, 35015.636800, 1654.464048, 867.328025, 328.249700, X, Y) && !ellipse(28726.541400, 35191.852600, 1681.640048, 902.632026, 350.463240, X, Y) && !ellipse(28414.781403, 36048.742004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29656.583740, 35361.575287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26310.004000, 35369.002000, 1616.720047, 1095.400032, 135.155100, X, Y) && !ellipse(27649.344421, 35790.545715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26702.871613, 34469.684570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29376.297607, 34909.527344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29978.546000, 35465.624020, 1705.896049, 1705.896049, 0.000000, X, Y) && !ellipse(28965.917694, 34829.557861, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:22 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63.gif
[Sun May 26 05:03:54 2013] Mean detx,y = (7004.34, 2182.98) 
[Sun May 26 05:03:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 05:04:16 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 05:04:17 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sun May 26 05:04:17 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sun May 26 09:01:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 09:01:27 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:17 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:17 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 2467.00
[Sun May 26 16:39:17 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_bgd.pi.gz = 350.00
[Sun May 26 16:39:17 2013] Got source and background scale factors 869256.000000, 175855.000000
[Sun May 26 16:39:17 2013] User source parameters:
  Position = (322.0, 398.9) = 17 2 40.09 -48 41 59.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 736.9 +/- 50.7
  Background aperture counts = 1730.1
  Rate = 0.07 +/- 0.005

[Sun May 26 16:39:17 2013] Updating counts from extracted products
[Sun May 26 16:39:17 2013] Set source signif. to 736.94/41.59 = 17.72
[Sun May 26 16:39:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:32 2013] Using photon index=1.80, rate=0.0716, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63.arf
[Sun May 26 16:39:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:32 2013] Updating source flux to 1.6e-12
[Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete