[Thu May 23 13:40:53 2013] Detection parameters:
  Position = (357.3, 407.9) = 17 2 24.62 -48 41 12.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.6 +/- 25.8
  Background counts = 280.1
  Rate = 0.02 +/- 0.004

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 9.01'
[Thu May 23 22:04:18 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Thu May 23 22:04:18 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 10.93"
[Fri May 24 05:50:08 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80.ximg exists
[Fri May 24 05:50:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80.csv
[Fri May 24 05:50:08 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80_1.ximg exists
[Fri May 24 05:50:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80.csv
[Fri May 24 05:50:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri May 24 05:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:27 2013] Source 55 is offset by -0.546042 and 8.967810 pixels which is larger than
2 X fitted extent = 1.884618 x 1.884618, not incorporating fit results
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:27 2013] Source is confused with source 53
[Fri May 24 23:52:27 2013] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 10.93"
[Fri May 24 23:52:27 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Fri May 24 23:52:27 2013] Giving source the simple spatial ID 77 for pass 1, mean size = 10.93"
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src77.ximg exists
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat May 25 09:00:44 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src77 appears to have run properly
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat May 25 09:00:47 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat May 25 17:23:28 2013] Warning, spatial fit 77 centroid is now closest to src. 61
[Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:29 2013] Assessing source extent using major
[Sat May 25 17:23:29 2013] Source does appear to be extended
[Sat May 25 17:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:36:21 2013] XMMSAS src. selection expression = ellipse(31033.203156, 35440.015472, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 03:36:21 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_src.reg
[Sun May 26 03:36:21 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (320, 370) - (395, 445)
[Sun May 26 03:36:21 2013] XMMSAS bgd. selection expression = annulus(31033.203156, 35440.015472, 1087.500000, 2175.000000, X, Y) && !ellipse(32783.844000, 32667.958000, 3511.632101, 883.432025, 323.470400, X, Y) && !ellipse(34437.418000, 33933.048000, 1755.816051, 1755.816051, 0.000000, X, Y) && !ellipse(28103.928200, 35015.636800, 1654.464048, 867.328025, 328.249700, X, Y) && !ellipse(28726.541400, 35191.852600, 1681.640048, 902.632026, 350.463240, X, Y) && !ellipse(33415.475983, 33020.697021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.781403, 36048.742004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29656.583740, 35361.575287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32955.308600, 33305.406000, 1709.760049, 706.774420, 77.540200, X, Y) && !ellipse(29376.297607, 34909.527344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29978.546000, 35465.624020, 1705.896049, 1705.896049, 0.000000, X, Y) && !ellipse(28965.917694, 34829.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32570.170410, 32424.255310, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:21 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55.gif
[Sun May 26 04:57:44 2013] Mean detx,y = (7160.23, 5270.55) 
[Sun May 26 04:57:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:58:27 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:58:27 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sun May 26 04:58:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun May 26 08:43:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 08:43:25 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:14 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:14 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 1985.00
[Sun May 26 16:39:14 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_bgd.pi.gz = 4884.00
[Sun May 26 16:39:14 2013] Got source and background scale factors 1170382.000000, 3231734.000000
[Sun May 26 16:39:14 2013] User source parameters:
  Position = (357.3, 407.9) = 17 2 24.62 -48 41 12.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 216.2 +/- 45.6
  Background aperture counts = 1768.8
  Rate = 0.02 +/- 0.004

[Sun May 26 16:39:14 2013] Updating counts from extracted products
[Sun May 26 16:39:14 2013] Set source signif. to 216.24/42.06 = 5.14
[Sun May 26 16:39:32 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:32 2013] Using photon index=1.80, rate=0.021, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55.arf
[Sun May 26 16:39:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:32 2013] Updating source flux to 3.9e-13
[Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete