[Thu May 23 13:40:52 2013] Detection parameters:
  Position = (304.4, 237.3) = 17 2 47.84 -48 53 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 423.4 +/- 29.3
  Background counts = 351.7
  Rate = 0.04 +/- 0.003

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 4.46'
[Thu May 23 22:04:18 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Thu May 23 22:04:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 19, frac = 0.766
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 8.66"
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src30.ximg exists
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri May 24 05:50:06 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src30 appears to have run properly
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri May 24 05:50:10 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Fri May 24 14:02:26 2013] Spatial fit model total counts = 3907.720000, observed total counts = 3804.000000
[Fri May 24 14:02:26 2013] Offset between fit and detection position for source 41 = 1.433001 pixels
[Fri May 24 14:02:26 2013] 3671.551000 total counts/ 3120.020000 bgd. counts: snr = 9.873957
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 1.433001 pixels
  Position = (303.3, 236.3) = 17 2 48.31 -48 53 38.9
  Extent = 17.3 (17.2-34.6)" x 6.4 (4.7-7.8)", rotation angle = 348 (341-354) degrees
  Source counts = 551.5 +/- 60.6
  Background counts = 3120.0
  Rate = 0.05 +/- 0.006
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.20
[Fri May 24 14:02:27 2013] Source is asymmetric
[Fri May 24 14:02:27 2013] Source is confused with source 42
[Fri May 24 23:52:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:24 2013] Initial guess for spatial extent in simple fitting = 11.88"
[Fri May 24 23:52:24 2013] source mask rpix=2.7, npix_max = 41, mask sum = 41, frac = 0.982
[Fri May 24 23:52:24 2013] Giving source the simple spatial ID 29 for pass 1, mean size = 11.88"
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29.csv
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29.csv
[Sat May 25 09:00:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29.csv
[Sat May 25 09:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Warning, spatial fit 29 centroid is now closest to src. 113
[Sat May 25 17:23:28 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:28 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:28 2013] Source does appear to be extended
[Sat May 25 17:23:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.20
[Sat May 25 17:23:28 2013] Source is asymmetric
[Sun May 26 03:36:16 2013] XMMSAS src. selection expression = ellipse(26339.270400, 20509.513600, 1038.762030, 386.415611, 347.537100, X, Y)
[Sun May 26 03:36:16 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_src.reg
[Sun May 26 03:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (244, 177) - (363, 296)
[Sun May 26 03:36:16 2013] XMMSAS bgd. selection expression = annulus(26339.270400, 20509.513600, 1731.270050, 3462.540100, X, Y) && !ellipse(27620.566000, 20509.642000, 1839.864053, 1839.864053, 0.000000, X, Y) && !ellipse(27616.176200, 19043.976000, 1480.192043, 1071.904031, 74.764600, X, Y) && !ellipse(27786.546040, 17908.005600, 1589.952046, 308.736809, 79.788000, X, Y) && !ellipse(28056.802220, 16439.226800, 1678.928048, 398.258411, 78.679700, X, Y) && !ellipse(27947.703220, 17053.850000, 1638.304047, 381.002411, 77.333600, X, Y) && !ellipse(27671.119800, 19346.714000, 1098.088032, 1098.088032, 0.000000, X, Y) && !ellipse(27797.695420, 17803.579340, 1589.952046, 344.623210, 80.358690, X, Y) && !ellipse(28898.104600, 20905.972920, 1418.232041, 780.604822, 320.723100, X, Y) && !ellipse(28158.423840, 15814.226400, 1720.504050, 476.148014, 77.800400, X, Y) && !ellipse(27481.950134, 21087.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.414000, 20394.846000, 1172.088034, 1172.088034, 0.000000, X, Y) && !ellipse(28187.032200, 20824.064400, 1396.512040, 443.348813, 349.179200, X, Y) && !ellipse(29497.990875, 20385.444458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29677.724000, 21110.074400, 1439.088041, 1439.088041, 0.000000, X, Y) && !ellipse(25502.793000, 20230.232000, 1050.704030, 524.905615, 254.085000, X, Y) && !ellipse(29401.002655, 20839.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26014.456000, 20374.707600, 1402.000040, 691.725620, 333.314500, X, Y) && !ellipse(29722.165619, 21465.019196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23843.439000, 20065.239200, 1220.464035, 707.258420, 340.607500, X, Y) && !ellipse(28980.475220, 21342.305069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30221.117310, 20578.937683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.162200, 21387.972400, 1936.592056, 421.203212, 347.573100, X, Y) && !ellipse(24720.501000, 20155.015600, 735.190421, 735.190421, 0.000000, X, Y) && !ellipse(25914.763336, 20832.540771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30546.556000, 20124.636000, 1485.696043, 749.497622, 50.374300, X, Y) && !ellipse(31177.496000, 21321.196000, 1738.904050, 380.186411, 169.076100, X, Y) && !ellipse(30567.041077, 21613.683578, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:16 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41.gif
[Sun May 26 04:21:06 2013] Mean detx,y = (-7024.64, -1497.22) 
[Sun May 26 04:21:09 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:21:40 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:21:40 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun May 26 04:21:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sun May 26 16:38:57 2013] Updating aperture counts using extracted products
[Sun May 26 16:38:57 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 3234.00
[Sun May 26 16:38:57 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_bgd.pi.gz = 9409.00
[Sun May 26 16:38:57 2013] Got source and background scale factors 959866.000000, 6546962.000000
[Sun May 26 16:38:57 2013] User source parameters:
  Position = (303.3, 236.3) = 17 2 48.31 -48 53 38.9
  Extent = 17.3 (17.2-34.6)" x 6.4 (4.7-7.8)", rotation angle = 348 (341-354) degrees
  Source aperture counts = 1854.5 +/- 57.9
  Background aperture counts = 1379.5
  Rate = 0.2 +/- 0.006

[Sun May 26 16:39:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:29 2013] Using photon index=1.80, rate=0.0536, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41.arf
[Sun May 26 16:39:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:30 2013] Updating source flux to 1.2e-12
[Sun May 26 16:40:19 2013] Flag c found in src. 41 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete