[Thu May 23 13:40:52 2013] Detection parameters:
  Position = (333.7, 245.9) = 17 2 34.92 -48 53 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.5 +/- 24.9
  Background counts = 110.4
  Rate = 0.03 +/- 0.002

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 4.59'
[Thu May 23 22:04:18 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Thu May 23 22:04:18 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.717
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 8.72"
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65.csv
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65_1.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65.csv
[Fri May 24 05:50:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65.csv
[Fri May 24 05:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:27 2013] Source 37 is offset by 2.721301 and 6.144012 pixels which is larger than
2 X fitted extent = 1.054483 x 1.054483, not incorporating fit results
[Fri May 24 14:02:27 2013] Source 37 is offset by 4.468704 and 5.185139 pixels which is larger than
2 X fitted extent = 8.020644 x 2.465605, not incorporating fit results
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:27 2013] Source is confused with source 116
[Fri May 24 23:52:27 2013] Using EEF radius (= 8.72 ")to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 8.72"
[Fri May 24 23:52:27 2013] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.717
[Fri May 24 23:52:27 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 8.72"
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62.csv
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62_1.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62.csv
[Sat May 25 09:00:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.csv
[Sat May 25 09:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Warning, spatial fit 62 centroid is now closest to src. 116
[Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:29 2013] Assessing source extent using major
[Sat May 25 17:23:29 2013] Source does appear to be extended
[Sat May 25 17:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:36:20 2013] XMMSAS src. selection expression = ellipse(28980.475220, 21342.305069, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 03:36:20 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_src.reg
[Sun May 26 03:36:20 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (296, 208) - (371, 283)
[Sun May 26 03:36:20 2013] XMMSAS bgd. selection expression = annulus(28980.475220, 21342.305069, 1087.500000, 2175.000000, X, Y) && !ellipse(27620.566000, 20509.642000, 1839.864053, 1839.864053, 0.000000, X, Y) && !ellipse(27616.176200, 19043.976000, 1480.192043, 1071.904031, 74.764600, X, Y) && !ellipse(27786.546040, 17908.005600, 1589.952046, 308.736809, 79.788000, X, Y) && !ellipse(27671.119800, 19346.714000, 1098.088032, 1098.088032, 0.000000, X, Y) && !ellipse(27797.695420, 17803.579340, 1589.952046, 344.623210, 80.358690, X, Y) && !ellipse(31429.190000, 21370.394000, 1545.440044, 197.679206, 353.346940, X, Y) && !ellipse(28898.104600, 20905.972920, 1418.232041, 780.604822, 320.723100, X, Y) && !ellipse(26339.270400, 20509.513600, 1385.016040, 515.220815, 347.537100, X, Y) && !ellipse(27481.950134, 21087.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.414000, 20394.846000, 1172.088034, 1172.088034, 0.000000, X, Y) && !ellipse(28187.032200, 20824.064400, 1396.512040, 443.348813, 349.179200, X, Y) && !ellipse(29497.990875, 20385.444458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29677.724000, 21110.074400, 1439.088041, 1439.088041, 0.000000, X, Y) && !ellipse(29401.002655, 20839.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26014.456000, 20374.707600, 1402.000040, 691.725620, 333.314500, X, Y) && !ellipse(31302.397400, 20741.812600, 569.811216, 569.811216, 0.000000, X, Y) && !ellipse(29722.165619, 21465.019196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30221.117310, 20578.937683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.142426, 20909.952133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.162200, 21387.972400, 1936.592056, 421.203212, 347.573100, X, Y) && !ellipse(30546.556000, 20124.636000, 1485.696043, 749.497622, 50.374300, X, Y) && !ellipse(31177.496000, 21321.196000, 1738.904050, 380.186411, 169.076100, X, Y) && !ellipse(30567.041077, 21613.683578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31407.211823, 21783.159409, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:20 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37.gif
[Sun May 26 04:43:13 2013] Mean detx,y = (-6867.29, 1208.88) 
[Sun May 26 04:43:16 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:43:31 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:43:32 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sun May 26 04:43:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sun May 26 08:20:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 08:20:49 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:08 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:08 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 1635.00
[Sun May 26 16:39:08 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_bgd.pi.gz = 165.00
[Sun May 26 16:39:08 2013] Got source and background scale factors 425348.000000, 97874.000000
[Sun May 26 16:39:08 2013] User source parameters:
  Position = (333.7, 245.9) = 17 2 34.92 -48 53 2.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 917.9 +/- 41.4
  Background aperture counts = 717.1
  Rate = 0.09 +/- 0.004

[Sun May 26 16:39:08 2013] Updating counts from extracted products
[Sun May 26 16:39:08 2013] Set source signif. to 917.93/26.78 = 34.28
[Sun May 26 16:39:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:31 2013] Using photon index=1.80, rate=0.0892, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37.arf
[Sun May 26 16:39:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:31 2013] Updating source flux to 1.6e-11
[Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete