[Thu May 23 13:40:52 2013] Detection parameters:
  Position = (228.0, 320.9) = 17 3 21.46 -48 47 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.3 +/- 41.2
  Background counts = 209.6
  Rate = 0.03 +/- 0.004

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 5.36'
[Thu May 23 22:04:18 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Thu May 23 22:04:18 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.780
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 66 for pass 0, mean size = 9.11"
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66.csv
[Fri May 24 05:50:07 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66_1.ximg exists
[Fri May 24 05:50:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66.csv
[Fri May 24 05:50:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri May 24 05:50:11 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Fri May 24 05:50:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66.csv
[Fri May 24 05:50:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 24 14:02:27 2013] Spatial fit model total counts = 4311.190000, observed total counts = 2398.000000
[Fri May 24 14:02:27 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 24 14:02:27 2013] Source is confused with source 92
[Fri May 24 23:52:27 2013] Using EEF radius (= 9.11 ")to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 9.11"
[Fri May 24 23:52:27 2013] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.780
[Fri May 24 23:52:27 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 9.11"
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63.csv
[Sat May 25 09:00:44 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat May 25 09:00:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63.csv
[Sat May 25 09:00:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sat May 25 09:00:47 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat May 25 09:00:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63.csv
[Sat May 25 09:00:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Spatial fit model total counts = 3661.860000, observed total counts = 2398.000000
[Sat May 25 17:23:28 2013] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:29 2013] Assessing source extent using major
[Sat May 25 17:23:29 2013] Source does appear to be extended
[Sat May 25 17:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 26 03:36:20 2013] XMMSAS src. selection expression = ellipse(19788.629715, 27865.800995, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 26 03:36:20 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_src.reg
[Sun May 26 03:36:20 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (191, 283) - (266, 358)
[Sun May 26 03:36:20 2013] XMMSAS bgd. selection expression = annulus(19788.629715, 27865.800995, 1087.500000, 2175.000000, X, Y) && !ellipse(19336.216000, 29798.776000, 1543.392044, 192.924806, 9.969470, X, Y) && !ellipse(19307.833115, 27526.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19728.392600, 24804.301000, 1443.840042, 384.760811, 70.084500, X, Y) && !ellipse(19916.742844, 27347.393250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20178.998672, 26123.899994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19033.968000, 27846.396000, 1506.824043, 648.107219, 61.685300, X, Y) && !ellipse(18650.446533, 30190.661469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19248.846000, 25816.806000, 1442.976042, 1442.976042, 0.000000, X, Y) && !ellipse(19722.304428, 25372.624939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.998672, 29194.696259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20352.994690, 25595.567749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.242294, 28297.946838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19680.131943, 26105.126282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20386.183884, 25193.458252, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:20 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30.gif
[Sun May 26 04:43:44 2013] Mean detx,y = (1483.54, -7287.62) 
[Sun May 26 04:43:46 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:44:02 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:44:02 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun May 26 04:44:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun May 26 08:21:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 26 08:21:03 2013] rmf not generated due to insufficient counts
[Sun May 26 16:39:09 2013] Updating aperture counts using extracted products
[Sun May 26 16:39:09 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 1655.00
[Sun May 26 16:39:09 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_bgd.pi.gz = 3029.00
[Sun May 26 16:39:09 2013] Got source and background scale factors 833870.000000, 1830987.000000
[Sun May 26 16:39:09 2013] User source parameters:
  Position = (228.0, 320.9) = 17 3 21.46 -48 47 28.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 275.5 +/- 41.7
  Background aperture counts = 1379.5
  Rate = 0.03 +/- 0.004

[Sun May 26 16:39:09 2013] Updating counts from extracted products
[Sun May 26 16:39:09 2013] Set source signif. to 275.53/37.14 = 7.42
[Sun May 26 16:39:31 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:31 2013] Using photon index=1.80, rate=0.0268, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30.arf
[Sun May 26 16:39:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:31 2013] Updating source flux to 6.3e-13
[Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete