[Thu May 23 13:40:56 2013] Detection parameters:
  Position = (331.4, 239.9) = 17 2 35.91 -48 53 20.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 292.0 +/- 42.3
  Background counts = 298.9
  Rate = 0.04 +/- 0.006

[Thu May 23 13:40:56 2013] Off-axis axis estimate = 4.87'
[Thu May 23 22:04:18 2013] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 8.86"
[Thu May 23 22:04:18 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.971
[Thu May 23 22:04:18 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.86"
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src27.ximg exists
[Fri May 24 05:50:06 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri May 24 05:50:06 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_src27 appears to have run properly
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri May 24 05:50:10 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri May 24 05:50:10 2013] Fit fullrun_mos1_xmm0111360201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri May 24 14:02:26 2013] Spatial fit model total counts = 4005.390000, observed total counts = 3822.000000
[Fri May 24 14:02:26 2013] Offset between fit and detection position for source 116 = 1.604247 pixels
[Fri May 24 14:02:26 2013] 3424.891000 total counts/ 2710.040000 bgd. counts: snr = 13.731807
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 1.604247 pixels
  Position = (332.7, 240.9) = 17 2 35.34 -48 53 19.0
  Extent = 17.7 (14.4-35.5)" x 9.8 (7.8-12.8)", rotation angle = 321 (305-335) degrees
  Source counts = 714.9 +/- 58.5
  Background counts = 2710.0
  Rate = 0.07 +/- 0.006
[Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000
[Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 24 14:02:27 2013] Assessing source extent using major axis lower bound
[Fri May 24 14:02:27 2013] Source does appear to be extended
[Fri May 24 14:02:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Fri May 24 14:02:27 2013] Source is confused with source 118
[Fri May 24 14:02:27 2013] Source is confused with source 38
[Fri May 24 14:02:27 2013] Source is confused with source 121
[Fri May 24 14:02:27 2013] Source is confused with source 111
[Fri May 24 14:02:27 2013] Source is confused with source 114
[Fri May 24 14:02:27 2013] Source is confused with source 35
[Fri May 24 14:02:27 2013] Source is confused with source 37
[Fri May 24 23:52:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 24 23:52:24 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Fri May 24 23:52:24 2013] source mask rpix=3.2, npix_max = 53, mask sum = 46, frac = 0.859
[Fri May 24 23:52:24 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 13.74"
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26.csv
[Sat May 25 09:00:43 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat May 25 09:00:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26.csv
[Sat May 25 09:00:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 25 09:00:46 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat May 25 09:00:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26.csv
[Sat May 25 09:00:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 25 17:23:28 2013] Warning, spatial fit 26 centroid is now closest to src. 38
[Sat May 25 17:23:28 2013] Source 116 is offset by 1.834811 and 1.143758 pixels which is larger than
2 X fitted extent = 1.054483 x 1.054483, not incorporating fit results
[Sat May 25 17:23:28 2013] Source 116 is offset by -2.128729 and -1.373392 pixels which is larger than
2 X fitted extent = 1.019398 x 2.971499, not incorporating fit results
[Sat May 25 17:23:28 2013] Spatial fit model total counts = 8680.100000, observed total counts = 2458.000000
[Sat May 25 17:23:28 2013] Poor agreement between spatial fit and data for source 116
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 25 17:23:28 2013] Vigneting correction estimate = 1.000000
[Sat May 25 17:23:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 25 17:23:28 2013] Assessing source extent using major axis lower bound
[Sat May 25 17:23:28 2013] Source does appear to be extended
[Sat May 25 17:23:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Sun May 26 03:36:16 2013] XMMSAS src. selection expression = ellipse(28898.104600, 20905.972920, 1063.674031, 585.453617, 320.723100, X, Y)
[Sun May 26 03:36:16 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_src.reg
[Sun May 26 03:36:16 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (272, 180) - (394, 302)
[Sun May 26 03:36:16 2013] XMMSAS bgd. selection expression = annulus(28898.104600, 20905.972920, 1772.790051, 3545.580102, X, Y) && !ellipse(27620.566000, 20509.642000, 1839.864053, 1839.864053, 0.000000, X, Y) && !ellipse(27616.176200, 19043.976000, 1480.192043, 1071.904031, 74.764600, X, Y) && !ellipse(27786.546040, 17908.005600, 1589.952046, 308.736809, 79.788000, X, Y) && !ellipse(28056.802220, 16439.226800, 1678.928048, 398.258411, 78.679700, X, Y) && !ellipse(27947.703220, 17053.850000, 1638.304047, 381.002411, 77.333600, X, Y) && !ellipse(27671.119800, 19346.714000, 1098.088032, 1098.088032, 0.000000, X, Y) && !ellipse(27797.695420, 17803.579340, 1589.952046, 344.623210, 80.358690, X, Y) && !ellipse(31429.190000, 21370.394000, 1545.440044, 197.679206, 353.346940, X, Y) && !ellipse(26339.270400, 20509.513600, 1385.016040, 515.220815, 347.537100, X, Y) && !ellipse(28158.423840, 15814.226400, 1720.504050, 476.148014, 77.800400, X, Y) && !ellipse(27481.950134, 21087.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.414000, 20394.846000, 1172.088034, 1172.088034, 0.000000, X, Y) && !ellipse(28187.032200, 20824.064400, 1396.512040, 443.348813, 349.179200, X, Y) && !ellipse(29497.990875, 20385.444458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29677.724000, 21110.074400, 1439.088041, 1439.088041, 0.000000, X, Y) && !ellipse(25502.793000, 20230.232000, 1050.704030, 524.905615, 254.085000, X, Y) && !ellipse(29401.002655, 20839.182327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26014.456000, 20374.707600, 1402.000040, 691.725620, 333.314500, X, Y) && !ellipse(31302.397400, 20741.812600, 569.811216, 569.811216, 0.000000, X, Y) && !ellipse(29722.165619, 21465.019196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28980.475220, 21342.305069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30221.117310, 20578.937683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.142426, 20909.952133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31562.162200, 21387.972400, 1936.592056, 421.203212, 347.573100, X, Y) && !ellipse(33191.912400, 21404.750000, 1620.872047, 1620.872047, 0.000000, X, Y) && !ellipse(24720.501000, 20155.015600, 735.190421, 735.190421, 0.000000, X, Y) && !ellipse(25914.763336, 20832.540771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30546.556000, 20124.636000, 1485.696043, 749.497622, 50.374300, X, Y) && !ellipse(31177.496000, 21321.196000, 1738.904050, 380.186411, 169.076100, X, Y) && !ellipse(32486.247589, 21915.363937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30567.041077, 21613.683578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31407.211823, 21783.159409, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 26 03:36:16 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116.gif
[Sun May 26 04:18:39 2013] Mean detx,y = (-7124.93, 1036.47) 
[Sun May 26 04:18:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 26 04:19:25 2013] Binned source spectrum to 10 counts/bin
[Sun May 26 04:19:25 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Sun May 26 04:19:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_bgd.pi.gz
[Sun May 26 16:38:56 2013] Updating aperture counts using extracted products
[Sun May 26 16:38:56 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_src_b10.pi.gz = 3686.00
[Sun May 26 16:38:56 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_bgd.pi.gz = 7607.00
[Sun May 26 16:38:56 2013] Got source and background scale factors 1257288.000000, 5622348.000000
[Sun May 26 16:38:56 2013] User source parameters:
  Position = (332.7, 240.9) = 17 2 35.34 -48 53 19.0
  Extent = 17.7 (14.4-35.5)" x 9.8 (7.8-12.8)", rotation angle = 321 (305-335) degrees
  Source aperture counts = 1984.9 +/- 61.7
  Background aperture counts = 1701.1
  Rate = 0.2 +/- 0.006

[Sun May 26 16:39:29 2013] Calculating source flux in energy range 0.30-8.00
[Sun May 26 16:39:29 2013] Using photon index=1.80, rate=0.0695, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116.arf
[Sun May 26 16:39:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 26 16:39:29 2013] Updating source flux to 1.3e-12
[Sun May 26 16:40:19 2013] Flag b found in src. 116 procflags, skipping spectral fitting
[Sun May 26 16:40:19 2013] Flag p found in src. 116 procflags, skipping spectral fitting
[Sun May 26 16:40:19 2013] Flag c found in src. 116 procflags, skipping spectral fitting
[Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src116_pl.csv not found, spectral fit skipped or did not complete