[Thu May 23 13:40:56 2013] Detection parameters: Position = (298.4, 240.0) = 17 2 50.46 -48 53 25.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 190.7 +/- 23.3 Background counts = 113.2 Rate = 0.02 +/- 0.002 [Thu May 23 13:40:56 2013] Off-axis axis estimate = 4.24' [Thu May 23 22:04:18 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting [Thu May 23 22:04:18 2013] Initial guess for spatial extent in simple fitting = 8.55" [Thu May 23 22:04:18 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.658 [Thu May 23 22:04:18 2013] Giving source the simple spatial ID 101 for pass 0, mean size = 8.55" [Fri May 24 14:02:27 2013] Vigneting correction estimate = 1.000000 [Fri May 24 14:02:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 24 14:02:27 2013] Assessing source extent using major [Fri May 24 14:02:27 2013] Source does appear to be extended [Fri May 24 14:02:27 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 24 14:02:27 2013] Source is confused with source 41 [Fri May 24 14:02:27 2013] Source is confused with source 117 [Fri May 24 23:52:27 2013] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting [Fri May 24 23:52:27 2013] Initial guess for spatial extent in simple fitting = 8.55" [Fri May 24 23:52:27 2013] source mask rpix=2.0, npix_max = 24, mask sum = 16, frac = 0.658 [Fri May 24 23:52:27 2013] Giving source the simple spatial ID 98 for pass 1, mean size = 8.55" [Sat May 25 09:00:45 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98.ximg exists [Sat May 25 09:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98.csv [Sat May 25 09:00:45 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98_1.ximg exists [Sat May 25 09:00:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98.csv [Sat May 25 09:00:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 25 09:00:48 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98.ximg exists [Sat May 25 09:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98.csv [Sat May 25 09:00:48 2013] fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98_1.ximg exists [Sat May 25 09:00:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98.csv [Sat May 25 09:00:48 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111360201_pi300-10000_cl_pass1_tfrozen_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 25 17:23:28 2013] Source 113 is offset by -1.690789 and -6.715715 pixels which is larger than 2 X fitted extent = 1.365113 x 1.874092, not incorporating fit results [Sat May 25 17:23:28 2013] Source 113 is offset by -1.502702 and -6.864405 pixels which is larger than 2 X fitted extent = 1.839301 x 1.839301, not incorporating fit results [Sat May 25 17:23:29 2013] Vigneting correction estimate = 1.000000 [Sat May 25 17:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 25 17:23:29 2013] Assessing source extent using major [Sat May 25 17:23:29 2013] Source does appear to be extended [Sat May 25 17:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 26 03:36:22 2013] XMMSAS src. selection expression = ellipse(25914.763336, 20832.540771, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 26 03:36:22 2013] Writing source region out to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_src.reg [Sun May 26 03:36:22 2013] Extracting stamp from image fullrun_mos1_xmm0111360201_pi300-10000_cl_sm2.00.img.gz, (261, 203) - (336, 278) [Sun May 26 03:36:22 2013] XMMSAS bgd. selection expression = annulus(25914.763336, 20832.540771, 1087.500000, 2175.000000, X, Y) && !ellipse(27620.566000, 20509.642000, 1839.864053, 1839.864053, 0.000000, X, Y) && !ellipse(27616.176200, 19043.976000, 1480.192043, 1071.904031, 74.764600, X, Y) && !ellipse(27786.546040, 17908.005600, 1589.952046, 308.736809, 79.788000, X, Y) && !ellipse(27947.703220, 17053.850000, 1638.304047, 381.002411, 77.333600, X, Y) && !ellipse(27671.119800, 19346.714000, 1098.088032, 1098.088032, 0.000000, X, Y) && !ellipse(27797.695420, 17803.579340, 1589.952046, 344.623210, 80.358690, X, Y) && !ellipse(28898.104600, 20905.972920, 1418.232041, 780.604822, 320.723100, X, Y) && !ellipse(26339.270400, 20509.513600, 1385.016040, 515.220815, 347.537100, X, Y) && !ellipse(27481.950134, 21087.345261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28640.414000, 20394.846000, 1172.088034, 1172.088034, 0.000000, X, Y) && !ellipse(28187.032200, 20824.064400, 1396.512040, 443.348813, 349.179200, X, Y) && !ellipse(25502.793000, 20230.232000, 1050.704030, 524.905615, 254.085000, X, Y) && !ellipse(26014.456000, 20374.707600, 1402.000040, 691.725620, 333.314500, X, Y) && !ellipse(23843.439000, 20065.239200, 1220.464035, 707.258420, 340.607500, X, Y) && !ellipse(24720.501000, 20155.015600, 735.190421, 735.190421, 0.000000, X, Y) [Sun May 26 03:36:22 2013] Writing fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113.gif [Sun May 26 05:10:48 2013] Mean detx,y = (-6878.01, -1876.25) [Sun May 26 05:10:50 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 26 05:11:02 2013] Binned source spectrum to 10 counts/bin [Sun May 26 05:11:02 2013] Setting source spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_src_b10.pi.gz [Sun May 26 05:11:02 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_bgd.pi.gz [Sun May 26 09:24:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 26 09:24:03 2013] rmf not generated due to insufficient counts [Sun May 26 16:39:20 2013] Updating aperture counts using extracted products [Sun May 26 16:39:20 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_src_b10.pi.gz = 1831.00 [Sun May 26 16:39:20 2013] Total counts from fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_bgd.pi.gz = 2021.00 [Sun May 26 16:39:20 2013] Got source and background scale factors 456820.000000, 1101226.000000 [Sun May 26 16:39:20 2013] User source parameters: Position = (298.4, 240.0) = 17 2 50.46 -48 53 25.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 992.6 +/- 43.8 Background aperture counts = 838.4 Rate = 0.1 +/- 0.004 [Sun May 26 16:39:20 2013] Updating counts from extracted products [Sun May 26 16:39:20 2013] Set source signif. to 992.63/28.95 = 34.28 [Sun May 26 16:39:33 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 26 16:39:33 2013] Using photon index=1.80, rate=0.0965, arf fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113.arf [Sun May 26 16:39:33 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 26 16:39:33 2013] Updating source flux to 1.5e-11 [Sun May 26 16:40:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 26 16:41:17 2013] xmm0111360201/analysis//spectral/fullrun_mos1_xmm0111360201_pi300-10000_pass1_cl_src113_pl.csv not found, spectral fit skipped or did not complete