[Mon Jan  2 18:13:27 2012] Detection parameters:
  Position = (324.2, 311.8) = 21 44 22.83 38 21 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1189.5 +/- 59.3
  Background counts = 1191.3
  Rate = 0.1 +/- 0.005

[Mon Jan  2 18:13:38 2012] Off-axis axis estimate = 2.10'
[Mon Jan  2 18:33:11 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Mon Jan  2 18:33:11 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Mon Jan  2 18:33:11 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.609
[Mon Jan  2 18:33:11 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.48"
[Tue Jan  3 20:55:52 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_src32.ximg exists
[Tue Jan  3 20:55:52 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_src32_1.ximg exists
[Tue Jan  3 20:55:52 2012] Fit fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_src32 appears to have run properly
[Tue Jan  3 20:55:55 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Tue Jan  3 20:55:55 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Tue Jan  3 20:55:55 2012] Fit fullrun_pn_xmm0111360101_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Wed Jan  4 03:35:14 2012] Source 35 is offset by 7.076204 and -4.985243 pixels which is larger than
2 X fitted extent = 3.876956 x 3.876956, not incorporating fit results
[Wed Jan  4 03:35:15 2012] Spatial fit model total counts = 11657.100000, observed total counts = 11641.000000
[Wed Jan  4 03:35:15 2012] Offset between fit and detection position for source 35 = 4.394985 pixels
[Wed Jan  4 03:35:15 2012] Warning, changing simple spatial fit ID from 32 to 78
[Wed Jan  4 03:35:15 2012] 11462.500000 total counts/ 8375.260000 bgd. counts: snr = 33.734264
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 4.394985 pixels
  Position = (326.1, 307.8) = 21 44 22.14 38 20 47.8
  Extent = 15.4 (15.3-30.9)", rotation angle = 0
  Source counts = 3087.2 +/- 107.1
  Background counts = 8375.3
  Rate = 0.3 +/- 0.01
[Wed Jan  4 03:35:15 2012] Vigneting correction estimate = 1.000000
[Wed Jan  4 03:35:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan  4 03:35:15 2012] Assessing source extent using major axis lower bound
[Wed Jan  4 03:35:15 2012] Source does appear to be extended
[Wed Jan  4 03:35:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan  4 03:35:15 2012] Source is confused with source 38
[Wed Jan  4 03:35:15 2012] Source is confused with source 93
[Wed Jan  4 03:36:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan  4 03:36:14 2012] Initial guess for spatial extent in simple fitting = 15.43"
[Wed Jan  4 03:36:14 2012] source mask rpix=3.5, npix_max = 65, mask sum = 63, frac = 0.962
[Wed Jan  4 03:36:14 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 15.43"
[Thu Jan  5 18:30:11 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Jan  5 18:30:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28.csv
[Thu Jan  5 18:30:11 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Jan  5 18:30:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28.csv
[Thu Jan  5 18:30:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan  5 18:30:14 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Jan  5 18:30:14 2012] fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Jan  5 18:30:14 2012] Fit fullrun_pn_xmm0111360101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Tue Jan 10 06:27:25 2012] Warning, spatial fit 28 centroid is now closest to src. 38
[Tue Jan 10 06:27:25 2012] Vigneting correction estimate = 1.000000
[Tue Jan 10 06:27:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 10 06:27:25 2012] Assessing source extent using major axis lower bound
[Tue Jan 10 06:27:25 2012] Source does appear to be extended
[Tue Jan 10 06:27:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 10 06:27:57 2012] Counts = 3087.240000, rescaling region sizes by 2.000000
[Tue Jan 10 06:27:57 2012] XMMSAS src. selection expression = ellipse(28319.364000, 26728.186000, 1851.504053, 1851.504053, 0.000000, X, Y)
[Tue Jan 10 06:27:57 2012] Writing source region out to fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35_src.reg
[Tue Jan 10 06:27:57 2012] Extracting stamp from image fullrun_pn_xmm0111360101_pi300-10000_cl_sm2.00.img.gz, (220, 201) - (432, 414)
[Tue Jan 10 06:27:57 2012] XMMSAS bgd. selection expression = annulus(28319.364000, 26728.186000, 6171.680178, 12343.360355, X, Y) && !ellipse(23373.266800, 25151.813000, 3806.040110, 3806.040110, 0.000000, X, Y) && !ellipse(22829.213200, 24358.724000, 3806.040110, 3806.040110, 0.000000, X, Y) && !ellipse(23954.902140, 24091.842000, 3686.544106, 3686.544106, 0.000000, X, Y) && !ellipse(23541.751251, 23812.816467, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23621.651980, 25829.768000, 3545.400102, 3545.400102, 0.000000, X, Y) && !ellipse(24368.372000, 24706.162600, 3471.576100, 3471.576100, 0.000000, X, Y) && !ellipse(29878.456573, 36752.192017, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29547.434000, 36260.304000, 5393.424155, 5393.424155, 0.000000, X, Y) && !ellipse(29471.698000, 35897.114000, 4597.992132, 4597.992132, 0.000000, X, Y) && !ellipse(28730.111267, 34491.524841, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28379.454000, 33996.538000, 4890.936141, 4890.936141, 0.000000, X, Y) && !ellipse(27847.426000, 32948.644000, 9322.896268, 9322.896268, 0.000000, X, Y) && !ellipse(28248.606000, 33472.048000, 3722.472107, 3722.472107, 0.000000, X, Y) && !ellipse(27651.310000, 32480.372000, 4546.608131, 4546.608131, 0.000000, X, Y) && !ellipse(27430.681800, 31907.194000, 4296.936124, 1346.817639, 117.414000, X, Y) && !ellipse(27119.330000, 31173.746000, 6994.368201, 6994.368201, 0.000000, X, Y) && !ellipse(26597.346000, 30475.934000, 8593.680247, 8593.680247, 0.000000, X, Y) && !ellipse(26170.570000, 29317.534000, 7072.656204, 7072.656204, 0.000000, X, Y) && !ellipse(26221.390000, 29483.494000, 3704.664107, 3704.664107, 0.000000, X, Y) && !ellipse(20392.572000, 29233.466000, 1450.680042, 1450.680042, 0.000000, X, Y) && !ellipse(27692.241730, 28827.280029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25822.168000, 28602.942000, 3536.520102, 3536.520102, 0.000000, X, Y) && !ellipse(28429.031777, 29199.590683, 1599.816046, 831.767862, 124.746861, X, Y) && !ellipse(19532.290000, 27513.826000, 1841.824053, 1841.824053, 0.000000, X, Y) && !ellipse(25630.180000, 28105.374000, 3448.920099, 3448.920099, 0.000000, X, Y) && !ellipse(19879.211600, 28561.516000, 1490.832043, 1490.832043, 0.000000, X, Y) && !ellipse(21634.883987, 28165.174133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.134000, 28821.918000, 6897.840198, 6897.840198, 0.000000, X, Y) && !ellipse(17972.992000, 27817.442600, 1478.608043, 1478.608043, 0.000000, X, Y) && !ellipse(29763.297333, 27299.876190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19194.408000, 27063.962000, 920.912026, 920.912026, 0.000000, X, Y) && !ellipse(20774.394000, 27271.022000, 1465.520042, 1465.520042, 0.000000, X, Y) && !ellipse(28177.616000, 26451.668000, 1726.824050, 1726.824050, 0.000000, X, Y) && !ellipse(18522.139000, 26195.070000, 832.816024, 832.816024, 0.000000, X, Y) && !ellipse(20487.628400, 26294.358000, 705.871220, 705.871220, 0.000000, X, Y) && !ellipse(20296.546000, 25373.510000, 1598.816046, 1598.816046, 0.000000, X, Y) && !ellipse(27494.870000, 24532.400000, 1204.832035, 1204.832035, 0.000000, X, Y) && !ellipse(22434.278000, 24968.310000, 3536.520102, 3536.520102, 224.059000, X, Y) && !ellipse(26909.592194, 24377.859802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28364.662415, 24195.015900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27282.183620, 24083.588200, 1187.968034, 1187.968034, 0.000000, X, Y) && !ellipse(26561.079773, 23863.899231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20053.207000, 24767.252200, 799.407223, 799.407223, 0.000000, X, Y) && !ellipse(28097.693909, 23692.559570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.739600, 23290.522000, 784.556823, 784.556823, 0.000000, X, Y) && !ellipse(18950.164000, 22846.308000, 693.509620, 693.509620, 0.000000, X, Y) && !ellipse(27806.665527, 23084.470245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.515320, 23222.810547, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(19569.400000, 23375.094000, 1387.016040, 1387.016040, 0.000000, X, Y) && !ellipse(27781.069400, 22500.658400, 690.096820, 690.096820, 0.000000, X, Y) && !ellipse(18430.010000, 22194.193800, 1920.992055, 1920.992055, 0.000000, X, Y) && !ellipse(27255.036000, 21925.258000, 667.311219, 667.311219, 0.000000, X, Y) && !ellipse(26617.631600, 22143.056900, 751.453622, 751.453622, 0.000000, X, Y) && !ellipse(26620.310000, 21713.189400, 2759.072079, 2759.072079, 0.000000, X, Y) && !ellipse(22160.431600, 23590.774000, 4009.320115, 4009.320115, 0.000000, X, Y) && !ellipse(24964.621277, 19664.414169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.168228, 19646.058624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24794.980835, 19276.368362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20437.380814, 19020.958527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19605.895996, 17181.753357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19215.399597, 16482.402710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19013.229736, 16075.722580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18604.197250, 15273.555923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18349.087433, 14590.067749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17634.745163, 13888.919647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21283.235977, 30012.078888, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30156.660000, 37258.120000, 4718.016136, 4718.016136, 0.000000, X, Y) && !ellipse(24867.049400, 31819.124000, 1393.072040, 1393.072040, 0.000000, X, Y) && !ellipse(21746.748000, 29475.532000, 1416.936041, 1416.936041, 0.000000, X, Y) && !ellipse(28942.944000, 30311.234020, 1365.624039, 763.730422, 117.647000, X, Y) && !ellipse(28029.060000, 28822.032000, 795.830423, 795.830423, 0.000000, X, Y) && !ellipse(29142.834800, 28738.734000, 984.280028, 984.280028, 0.000000, X, Y) && !ellipse(19664.962433, 28917.264282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20129.523529, 28730.079407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28623.960541, 28202.150726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18580.410000, 28142.696480, 1515.896044, 1515.896044, 0.000000, X, Y) && !ellipse(28842.747000, 27408.650000, 6122.112176, 6122.112176, 0.000000, X, Y) && !ellipse(28726.396000, 26748.138000, 1020.352029, 1020.352029, 0.000000, X, Y) && !ellipse(16432.255963, 27284.350349, 3138.944090, 1036.943636, 33.072982, X, Y) && !ellipse(16870.782000, 26734.214000, 2918.368084, 2918.368084, 0.000000, X, Y) && !ellipse(30912.954224, 26378.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17454.566000, 26653.488220, 1613.664046, 1112.048032, 227.709000, X, Y) && !ellipse(29569.934000, 26032.688000, 1239.208036, 724.228021, 304.256700, X, Y) && !ellipse(30348.370000, 26300.298400, 1363.160039, 1363.160039, 0.000000, X, Y) && !ellipse(17393.014000, 25998.767800, 1569.472045, 1569.472045, 0.000000, X, Y) && !ellipse(18050.688000, 26264.514000, 1582.488046, 1335.880038, 49.013400, X, Y) && !ellipse(29050.289215, 25520.802124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18734.824000, 24495.640000, 2061.144059, 2061.144059, 0.000000, X, Y) && !ellipse(17720.958000, 24677.546000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(28618.204437, 24753.249084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30091.217346, 24067.624939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17319.294000, 23187.946000, 1594.584046, 1594.584046, 0.000000, X, Y) && !ellipse(29521.315308, 23719.040833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28438.860400, 23610.446000, 1228.112035, 1228.112035, 0.000000, X, Y) && !ellipse(18193.568000, 23719.889800, 1538.384044, 1538.384044, 0.000000, X, Y) && !ellipse(28552.810000, 22204.670000, 710.899220, 710.899220, 0.000000, X, Y) && !ellipse(18101.150000, 22264.350800, 1630.608047, 1630.608047, 0.000000, X, Y) && !ellipse(27947.430000, 21671.316000, 1421.800041, 360.476810, 25.401000, X, Y) && !ellipse(27737.184000, 21457.740000, 1379.936040, 1379.936040, 0.000000, X, Y) && !ellipse(17945.182000, 21152.398000, 1612.616046, 1612.616046, 0.000000, X, Y) && !ellipse(17020.996000, 20467.430000, 9675.696278, 9675.696278, 0.000000, X, Y) && !ellipse(16064.524994, 20812.657257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16514.882000, 20973.091800, 1768.184051, 1768.184051, 0.000000, X, Y) && !ellipse(29003.061554, 20498.001770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28197.427429, 20324.299133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25543.661926, 20489.439301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.762000, 19879.312000, 1469.176042, 1469.176042, 0.000000, X, Y) && !ellipse(27595.998000, 19498.490000, 1444.736042, 1444.736042, 0.000000, X, Y) && !ellipse(19739.077576, 19539.803024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26750.016968, 19805.209045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23031.090881, 19968.618134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29127.781555, 19275.176254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25779.415253, 19787.959320, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21528.121277, 19618.052048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22032.404266, 18972.763107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22930.892731, 19099.559341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19678.488480, 18572.559921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21089.858246, 18742.885361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20625.204224, 17866.940750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20366.188858, 17354.121841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19904.276154, 16649.499634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19635.827469, 15950.763626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19116.724106, 14996.577957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18807.322922, 14384.391922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16931.556671, 14039.564682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18492.881165, 13775.415817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17469.311615, 13540.048798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18145.307600, 12990.976000, 1698.416049, 1698.416049, 0.000000, X, Y)
[Tue Jan 10 06:27:57 2012] Writing fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35.gif
[Tue Jan 10 09:18:37 2012] Mean detx,y = (-2638.35, 3023.24) 
[Tue Jan 10 09:18:41 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 10 09:21:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 10 09:21:39 2012] Setting source spectrum file to fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Jan 10 09:21:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Jan 13 04:13:12 2012] Updating aperture counts using extracted products
[Fri Jan 13 04:13:12 2012] Error reading totcts from fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Jan 13 04:13:19 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jan 13 04:13:19 2012] Using photon index=1.80, rate=0.297, arf fullrun_pn_xmm0111360101_pi300-10000_pass1_cl_src35.arf
[Fri Jan 13 04:13:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jan 13 04:13:19 2012] Updating source flux to 8.1e-13
[Fri Jan 13 04:19:18 2012] Flag b found in src. 35 procflags, skipping spectral fitting
[Fri Jan 13 04:19:18 2012] Flag c found in src. 35 procflags, skipping spectral fitting