[Thu Sep  6 10:02:40 2012] Detection parameters:
  Position = (308.6, 411.9) = 3 14 14.92 -22 28 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.0 +/- 7.6
  Background counts = 1.9
  Rate = 0.009 +/- 0.002

[Thu Sep  6 10:02:40 2012] Off-axis axis estimate = 8.26'
[Thu Sep  6 10:29:34 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Thu Sep  6 10:29:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep  6 10:29:34 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Thu Sep  6 10:29:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.876
[Thu Sep  6 10:29:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.56"
[Thu Sep  6 10:43:55 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep  6 10:43:55 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep  6 10:43:55 2012] Fit fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_src1 appears to have run properly
[Thu Sep  6 10:43:55 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep  6 10:43:55 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep  6 10:43:55 2012] Fit fullrun_mos2_xmm0111320501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep  6 10:44:03 2012] Spatial fit model total counts = 53.774800, observed total counts = 53.000000
[Thu Sep  6 10:44:03 2012] Offset between fit and detection position for source 1 = 0.223170 pixels
[Thu Sep  6 10:44:03 2012] 53.784800 total counts/ 25.890500 bgd. counts: snr = 5.482078
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223170 pixels
  Position = (308.4, 411.8) = 3 14 14.99 -22 28 44.9
  Extent = 5.9 (4.2-8.3)", rotation angle = 0
  Source counts = 27.9 +/- 7.3
  Background counts = 25.9
  Rate = 0.004 +/- 0.001
[Thu Sep  6 10:44:03 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 10:44:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 10:44:03 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 10:44:03 2012] Source does appear to be extended
[Thu Sep  6 10:44:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 11:17:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep  6 11:17:26 2012] Initial guess for spatial extent in simple fitting = 5.89"
[Thu Sep  6 11:17:26 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.874
[Thu Sep  6 11:17:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.89"
[Thu Sep  6 11:29:53 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep  6 11:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 11:29:53 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep  6 11:29:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1.csv
[Thu Sep  6 11:29:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep  6 11:29:53 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep  6 11:29:53 2012] fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep  6 11:29:53 2012] Fit fullrun_mos2_xmm0111320501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep  6 11:30:01 2012] Spatial fit model total counts = 44.011600, observed total counts = 44.000000
[Thu Sep  6 11:30:01 2012] Offset between fit and detection position for source 1 = 0.014240 pixels
[Thu Sep  6 11:30:01 2012] 44.675200 total counts/ 16.388400 bgd. counts: snr = 6.987399
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014240 pixels
  Position = (308.4, 411.8) = 3 14 14.98 -22 28 45.0
  Extent = 6.2 (4.3-8.6)", rotation angle = 0
  Source counts = 28.3 +/- 6.7
  Background counts = 16.4
  Rate = 0.004 +/- 0.001
[Thu Sep  6 11:30:01 2012] Vigneting correction estimate = 1.000000
[Thu Sep  6 11:30:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep  6 11:30:01 2012] Assessing source extent using major axis lower bound
[Thu Sep  6 11:30:01 2012] Source does appear to be extended
[Thu Sep  6 11:30:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep  6 11:37:29 2012] XMMSAS src. selection expression = ellipse(26779.015200, 35775.455800, 374.820611, 374.820611, 0.000000, X, Y)
[Thu Sep  6 11:37:29 2012] Writing source region out to fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep  6 11:37:29 2012] Extracting stamp from image fullrun_mos2_xmm0111320501_pi300-10000_cl_sm2.00.img.gz, (287, 390) - (330, 433)
[Thu Sep  6 11:37:29 2012] XMMSAS bgd. selection expression = annulus(26779.015200, 35775.455800, 624.701018, 1249.402036, X, Y)
[Thu Sep  6 11:37:29 2012] Writing fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1.gif
[Thu Sep  6 11:37:30 2012] Mean detx,y = (1900.44, 8259.41) 
[Thu Sep  6 11:37:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Sep  6 11:37:37 2012] grppha failed
[Thu Sep  6 11:37:37 2012] Setting source spectrum file to fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 11:37:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Sep  6 11:39:52 2012] Not generating rmf since there are only 28 counts
[Thu Sep  6 11:39:52 2012] rmf not generated due to insufficient counts
[Thu Sep  6 11:40:00 2012] Updating aperture counts using extracted products
[Thu Sep  6 11:40:00 2012] Error reading totcts from fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1_src.pi.gz
[Thu Sep  6 11:40:00 2012] No arf file for this source, not re-computing flux
[Thu Sep  6 11:40:02 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Sep  6 11:40:03 2012] xmm0111320501/analysis//spectral/fullrun_mos2_xmm0111320501_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete