[Thu Jun  7 10:27:26 2012] Detection parameters:
  Position = (179.4, 304.1) = 3 36 1.37 -25 42 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.7 +/- 17.3
  Background counts = 59.5
  Rate = 0.009 +/- 0.001

[Thu Jun  7 10:27:26 2012] Off-axis axis estimate = 8.64'
[Thu Jun  7 11:03:48 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 11:03:48 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 11:03:48 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Thu Jun  7 11:03:48 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.935
[Thu Jun  7 11:03:48 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.75"
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3.csv
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3.csv
[Thu Jun  7 11:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  7 11:24:58 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun  7 11:24:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Thu Jun  7 11:24:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:25:10 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.062688 pixels away
[Thu Jun  7 11:25:10 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:25:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:25:10 2012] Assessing source extent using major
[Thu Jun  7 11:25:10 2012] Source does appear to be extended
[Thu Jun  7 11:25:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 11:51:45 2012] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 11:51:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun  7 11:51:45 2012] Initial guess for spatial extent in simple fitting = 10.75"
[Thu Jun  7 11:51:45 2012] source mask rpix=2.5, npix_max = 35, mask sum = 33, frac = 0.935
[Thu Jun  7 11:51:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.75"
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3.csv
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3.csv
[Thu Jun  7 12:11:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun  7 12:11:09 2012] fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun  7 12:11:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Jun  7 12:11:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111320101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 12:11:20 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 13.603670 pixels away
[Thu Jun  7 12:11:20 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 12:11:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 12:11:20 2012] Assessing source extent using major
[Thu Jun  7 12:11:20 2012] Source does appear to be extended
[Thu Jun  7 12:11:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:51:25 2012] XMMSAS src. selection expression = ellipse(15556.242203, 26404.690582, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun  7 12:51:25 2012] Writing source region out to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun  7 12:51:25 2012] Extracting stamp from image fullrun_mos2_xmm0111320101_pi300-10000_cl_sm2.00.img.gz, (142, 267) - (217, 342)
[Thu Jun  7 12:51:25 2012] XMMSAS bgd. selection expression = annulus(15556.242203, 26404.690582, 1087.500000, 2175.000000, X, Y)
[Thu Jun  7 12:51:25 2012] Writing fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9.gif
[Thu Jun  7 12:52:46 2012] Mean detx,y = (-8838.52, 915.75) 
[Thu Jun  7 12:52:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 12:53:04 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 12:53:05 2012] Setting source spectrum file to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun  7 12:53:05 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun  7 13:04:05 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun  7 13:04:05 2012] rmf not generated due to insufficient counts
[Thu Jun  7 13:09:34 2012] Updating aperture counts using extracted products
[Thu Jun  7 13:09:34 2012] Error reading totcts from fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun  7 13:09:35 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 13:09:35 2012] Using photon index=1.80, rate=0.00947, arf fullrun_mos2_xmm0111320101_pi300-10000_pass1_cl_src9.arf
[Thu Jun  7 13:09:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 13:09:35 2012] Updating source flux to 1.5e-13
[Thu Jun  7 13:10:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting